PORSCHE 996 TURBO CAR CHARGER
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
$2,484.00
Make a selection
$2,538.00
Make a selection
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 288kw (392hp) @ 7500rpm
Max. Torque - 400nm (295lbf ft) @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$1,759.41
Make a selection
Designed to prolong the life of your turbocharger, this greddy turbo timer allows your Porsche to idle the engine for a timed period, with the ignition key removed. This conveniently allows the engine oil and turbo center cartridge to cool down properly and prolong turbo and oil life. The run time can be programmed by the user or utilize it’s “full auto mode”, which estimate the driving rpm according to the vehicle’s alternator signal and then recommend a count down time. To prevent theft, the unit includes a parking brake and speedo hook-up which disengage operation if there is an attempt to move the vehicle without the key. The unit also includes a stopwatch/lap timer and attack modes along with a bui...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 944 1989-91 944 1985-88
Special intake hose kit for enhanced performance vehicles.
The original plastic tubes are restrictive on one side and have different lengths. Our reinforced suction hoses kit replaces the narrow and different lengths plastic tubes. This is a perfect homogeneous intake air guide from the intake manifold to the turbocharger and provides a smooth power delivery.
Design to withstand the vacuum pressure and will not collapse.
Made for the 993 GT2 racecars.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Kit includes:
Software fast load, sport air filter, sportmuffler (100 cell sport catalytic), k24-race turbocharger l/r
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 397kw (540hp) @ 7000rpm
Max. Torque - 760nm (561lbf ft) @ 4500rpm
Max. Speed - 331km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally le...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$16,198.28
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,707.29
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,707.29
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 386kw (525hp) @ 6000rpm
Max. Torque - 755nm (557lbf ft) @ 4500rpm
Max. Speed - 329km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,182.35
Make a selection
Kit includes: software genius flash tool , sport air filter, exhaust system GT with 90mm endtips and 200 cell sportcatalytic, ipd with 82 mm throttlebody. Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 280kw (381hp) @ 7400rpm max. Torque - 385nm (284lbf ft) @ 5000rpm max. Speed - 312km/h max. Rpm - 8000rpm acceleration 0-100km/h - 4.6s tuning: max. Power - 308kw (420hp) @ 7500rpm max. Torque - 450nm (295lbf ft) @ 5000rpm max. Speed - 320km/h max. Rpm - 8200rpm acceleration 0-100km/h - 4.1s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led ...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
From $11,320.18
Make a selection
Kit includes:
Software fast load., sport air filter
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 375kw (510hp) @ 5000rpm
Max. Torque - 745nm (550lbf ft) @ 4500rpm
Max. Speed - 328km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.8s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfect...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,232.61
Make a selection
Kit includes:
Software fast load., sport air filter, sportmuffler (100 cell sport catalytic), k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$23,298.00
Make a selection
Kit includes:
Software fast load, sport air filter, sport muffler set " brombacher" , mounting kit muffler, ipd with 82 mm throttlebody.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 294kw (400hp) @ 7500rpm
Max. Torque - 415nm @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to ou...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$6,866.91
Make a selection
We offer offers 3 stages of turbocharger upgrades. All upgrades come with upgraded compressor housings and custom machined seal plates. These upgrades are bolt up and come with a 1 year warranty. Rebuildable turbocharger core required.
The bnr stage 3 consists of an upgraded chra (center housing rotating assembly). This chra has the capabilities of over 400 rwhp in a properly modified car. The turbine and compressor wheels are upgraded and the center housing can come either water cooled or non water cooled. This unit will need minor fabrication for fitment on car. The thrust bearing is upgraded to 360 degrees. This is a great turbocharger for high boost applications. The rotating assembly is balanced/ bluep...(choose a part on the right to read more)
General Fitment 944 1985-88 944 1989-91
$1,372.14
Make a selection
We offer offers 3 stages of turbocharger upgrades. All upgrades come with upgraded compressor housings and custom machined seal plates. These upgrades are bolt up and come with a 1 year warranty. Rebuildable turbocharger core required.
The bnr stage 2 consists of an upgraded compressor wheel and compressor housing. The factory turbine wheel is clipped to reduce back pressure. It also helps stabilize boost control and rotating assembly rpm. The stage 2 is rated for 330-350 rwhp in a properly tuned car. The rotating assembly is balanced and blueprinted. Turbo response is near to stock. The turbocharger upgrade is remanufactured and given a 1 year warranty through bnr supercars.
General Fitment 944 1985-88 944 1989-91
$1,207.48
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,623.20
Make a selection
These upgrades are bolt up and come with a 1 year warranty. Rebuildable turbocharger core required.
The bnr stage 1 consists of an upgraded compressor wheel and compressor housing. The factory turbine wheel is clipped to reduce back pressure. It also helps stabilize boost control and rotating assembly rpm. The stage 1 is rated for 300-330 rwhp in a properly tuned car. The rotating assembly is balanced and blueprinted. Turbo response is near to stock. The turbocharger upgrade is remanufactured and given a 1 year warranty through bnr supercars
General Fitment 944 1985-88 944 1989-91
$1,097.71
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,825.28
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,623.20
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
Sprung hub/cu...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,825.28
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
Sprung hub/cu...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,623.20
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
Sprung hub/cu...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,623.20
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,623.20
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
Sprung hub/cu...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,623.20
Make a selection
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
Sprung hub/cu...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,623.20
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|