PORSCHE 356C EXHAUST TIN
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This muffler was specifically designed for a backdate to the st look. It is manufactured for mid-range and top end performance, all without drone inside the cabin. It seamlessly mates to ssi heat exchangers for added performance while keeping the cabin warm in the winter. The muffler is vastly different than the common baffle plated mufflers stuffed with packing material that are common in the aftermarket. Ours are uniquely made with double perforated sound absorption tubes based on the halbgegenstromprinzip (half counter current principle). The acoustic silencer absorption tubes are made in a trapezoidal pattern and are perforated with varying diameters, which isolate and dampen the unwanted frequencies that c...(choose a part on the right to read more)
$2,566.30
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,106.10
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,996.00
Make a selection
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,232.34
Make a selection
- equal length headers with long tube design
- 200 cell German hjs "hf" sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- rsr style connections and quick release clamps
- quad 3.5" (90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only.
- weighs 62 lbs.(28,0 kg).
Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany.
Performance gains (includes FVD software, sport airfilter and exhaust):, based on the 3.8 l:
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7900rpm
Acceleration 0-100km/h - 4.4s
Our "brombacher" system use...(choose a part on the right to read more)
General Fitment 911 2005-08
From $8,190.60
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
"brombacher" (sound version) stainless steel mufflers
(3.6l model need end tips from 3.8l model, FVD 111 997 01 or FVD 111 997 03, larger pipe implementing equal more power).
Facts (based on 997s):
- + 10 crank hp & + 10 crank torque
- 2 1/2? (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The export sound version of our "brombacher" sport mufflers gives the 997 a more pronounced, aggressive sound compared to factory mufflers. These end-muffl...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,786.40
Make a selection
"brombacher" sport muffler for 997gt3/rs (sound version)
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 28 lbs. (12.7 kg)
- replaces stock side mufflers and stock center muffler
- 36 lbs (16.3 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no interior resonance
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
For reference:
997 GT3 OEM exhaust weight
Stock...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$3,128.40
Make a selection
"brombacher" sport muffler for 997gt3/rs (sound version) in titanium
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 17 lbs. (7.7 kg)
- replaces stock side mufflers and stock center muffler
- 47 lbs (21.3 kg) savings over stock system!
- 1,000 degree celcius titanium
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
All titanium systems are not created equal. The titanium that we use is the highest grade ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,107.20
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,479.10
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added benefit is that ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $5,815.70
Make a selection
Brombacher titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
This system is complete from titanium because it is without any catalytic.
. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat value titanium available (1000 degrees celcius) and has a much greater wall thickness than 75% of the systems on the m...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$8,972.70
Make a selection
Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs i...(choose a part on the right to read more)
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $8,647.10
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
"brombacher" titanium race system (sound version) for 2010 GT3/rs
Facts:
- + 20 crank hp & + 19 crank torque.
- complete system in titanium (without sidemufflers)
- 200 cell high flow, titanium tri metal German hjs sport catalysts
- 2 x 90mm tailpipes.
- weighs 28.6 lbs (13kg)!
- 1000 degree celcius, high grade titanium material
- 105-107 db
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
The titanium tips can be ordered ?flamed? Which exhibit?s the blue tint.
All titanium systems not created equal! Brombacher exhausts systems are ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,066.90
Make a selection
Brombacher 997.2 tt "sport stock" stainless steel, cat bypass for OEM muffler facts: - + 21 crank hp & + 18 crank torque** - reuses OEM muffler, perfect for those looking for more sound and power. - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 6 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell or 200 cell. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programmin is necessary. - reuses OEM tips. FVD i...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,206.70
Make a selection
Brombacher 997.2 tt ?sport stock? Titanium, sport cat converter replacements for OEM muffler
Facts:
- + 21 crank hp & + 18 crank torque**
- 200 cell ?hd?, tri metal German hjs sport catalysts with titanium housings.
- reuses OEM muffler, perfect for those looking for more sound and power.
- tubing diameter is the same as the OEM system.
- weighs 40% less that stainless steel equivalent.
- t 316 stainless steel for improved durability over t 304.
- reduces backpressure and thermal stress
- 5 on a scale of 1-10 in volume (1 being stock).
- reuses OEM v band style connecting hardware.
- made in Germany.
- available in 100 cell and cat bypass. Please ask your sales person for pricing.
- more distin...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,625.98
Make a selection
Brombacher 997.2 tt "sport " stainless steel, sport cat converter replacements for our bes- muffler facts: - + 21 crank hp & + 18 crank torque** - 200 cell "hd", tri metal German hjs sport catalysts - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 5 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell and cat bypass. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programming not necessary. - reuses OEM ti...(choose a part on the right to read more)
$4,303.20
Make a selection
FVD primary muffler bypass system for 2009- 997/997s
Fit with and without factory sport valved exhaust !
Facts (based on 997s):
- + 5 crank hp & + 4 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 5.5 lbs weight savings
- t 316 stainless steel for improved durability over t 304
- adjustable design for easy installation
- includes quick release clamps
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
- fits with or without sound switch system
- weight: 4.6kg (10.14lbs)
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,543.30
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
Brombacher 997.2 tt "cat-back" (sound version) muffler for OEM cats
Facts:
- up to 25 crank hp & + 25 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 5 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:t...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound.
Features:
Stainless steel sport ...(choose a part on the right to read more)
General Fitment 930 1975-77
$2,331.08
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|