PORSCHE 993 EUR
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
From $27.30
Make a selection
H&r sport springs lower the vehicle center of gravity and reduce body roll for better handling. Enhance the look of your vehicle with a reduced fender well gap. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. Benefits: lowers the front axle 1.5 inches (35mm) and the rear axle 1.5 inch (35mm). Sporty appearance improved handling characteristics lowered center of gravity linear or progressive spring design compatible with oe and aftermarket shock absorbers powder coated (red) for enhanced appearance and corrosion resistance delivered with TUV approval engineered, manufactured and tested i...(choose a part on the right to read more)
General Fitment 911 1989-94
From $677.90
Make a selection
Lowering 35 mm front and 30 mm rear - like European m030
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Highlights: made for up to 750*c (1,382*f) for street, some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1994-98 911 1989-94 928 1992-95
From $279.51
Make a selection
- + 15 crank hp & + 12 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 20.0 lbs. (9.3 kg)
- replaces OEM primary muffler.
- t 304 stainless steel
- 20% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
- 3.5" x 4.5" (89x115 mm) oval exhaust tips included.
- made in europe and comes with German tÜv approval.
Tech tip: it's a good idea to replace your primary muffler clamps & hardware with this upgrade. You will also need to add our twin exhaust valence to accommodate the dual tips. FVD 559 00
General Fitment 911 1989-94
$1,278.35
Make a selection
- + 12 crank hp & + 8 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 1.1 lbs. (0.5 kg)
- replaces OEM secondary muffler.
- t 304 stainless steel
- 40% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust.
- made in europe.
Tech tip: it's a good idea to replace your muffler and exhaust tip clamps & hardware with this upgrade. You can order our prepackaged 964 muffler installation kit comprised of genuine Porsche® parts, simply add part # FVD mk9 640 01 to your order.
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), ...(choose a part on the right to read more)
General Fitment 911 1989-94
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
$1,027.95
Make a selection
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity)...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Keep your brake temps under control with our brake air duct kit. Available with or without fog lights. This kit comes with fog lights.
Note: not for use on a u.s. Bumper unless you are prepared to fill the gap that removing the bumperettes creates. You will see a 1/2 inch gap on the top of the air inlet and a 1/4 on the bottom.
When installing this kit on a euro bumper use part number FVD 631 407 to complete the look.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98)
General Fitment 911 1994-98
$1,399.88
Make a selection
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
- + 15 crank hp & + 12 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 8.0 lbs. (3.6 kg)
- replaces OEM primary muffler.
- t 304 stainless steel
- 20% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
- completely adjustable for simple installation.
- made in europe.
Tech tip: it's a good idea to replace your primary muffler clamps & hardware with this upgrade. FVD mk9 640 01
Fits: cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedit...(choose a part on the right to read more)
General Fitment 911 1989-94
Product details:
Improved sports car sound; deep and throaty while maintaining street appropriate volume
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-1994
-increased throttle response throughout the rpm range with less restrictive mufflers
-available in either a single or dual outlet configuration
Note: requires slight modification to the factory rear bumper for proper fitment of the second outlet
-constructed from high-quality 14-16 gauge cnc mandrel-bent t304l stainless steel for optimum flow and maximum durability
-direct bolt-on replacement for the restrictive factory mu...(choose a part on the right to read more)
General Fitment 911 1989-94
From $1,254.75
Make a selection
Plug n play mass air flow system
No engine modifications, easy instalation.
Power increase up to 36 kw (50 ps).
Kit includes:
Air flow meter, tuning-chip, air temperaturesensor, sport-airfilter, sport catalytic.
Requires 98 octane in europe
Requires 93 octane in the u.s.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
$3,262.88
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|