PORSCHE 986 EXHAUST GASKET
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
"brombacher" (sound version) stainless steel mufflers
(3.6l model need end tips from 3.8l model, FVD 111 997 01 or FVD 111 997 03, larger pipe implementing equal more power).
Facts (based on 997s):
- + 10 crank hp & + 10 crank torque
- 2 1/2? (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The export sound version of our "brombacher" sport mufflers gives the 997 a more pronounced, aggressive sound compared to factory mufflers. These end-muffl...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,929.31
Make a selection
This is our jekyll and hyde version ! The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Top of the line or range depending on the english, and is the best choice for a daily driver. + 11 hp & + 10 tq gain. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - 2 1/2 tubing (63.5 mm). - 2 x 3.5 (90 mm) round tips. - intoxicating growl at idle, partial throttle and wide open throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - minimal resonance / drone in the cabin (200 rpms worth) compared t...(choose a part on the right to read more)
$5,613.30
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$9,233.14
Make a selection
Fabspeed;s performance headers are perfect for the 987.2 owner looking for more power across the entire rpm range and a more aggressive exhaust sound. Their 304 stainless system features mandrel bends that are optimized for maximum flow.
Features
Fits all 987.2 Boxster/Cayman/spider vehicles 09-12
Gaskets included.
Equal length t304 stainless steel c.n.c. Mandrel bent header pipes for better torque and equalized engine pulsing and maximum exhaust flow.
F1/nascar/indycar style high velocity merge collectors.
More power and torque across the rpm band and dramatically improved sports car sound.
Simple and easy direct bolt-on replacement headers for all stock 987 headers....(choose a part on the right to read more)
General Fitment BOXSTER 2009-11 CAYMAN 2009-12
$4,235.71
Make a selection
"brombacher" exhaust system for 997 GT3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up for maximum torque gain
- weighs 71 lbs. (32,2 kg),
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) round center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$9,187.99
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $8,767.44
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$9,187.99
Make a selection
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owner's dream. B&b's complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive. Their exhaust kit consists of hand built t321 stainless steel headers, with or without, heat exchangers and a t304 stainless steel high performance muffler. Also included is a turbo oil accumulator, oil scavenging line and all necessary hardware, gaskets and accessories to make for a clean bolt-on installation. Billy boat performance exhaust has a deep commitment to build ...(choose a part on the right to read more)
General Fitment 930 1975-77
$5,493.32
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,286.90
Make a selection
B&b headers Porsche Boxster 97-99
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and street development invested into...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,534.12
Make a selection
B&b started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded us impressive horsepower and torque gains throughout the entire power band. Headers and muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Included in the kit is the header set, 1.625" or 1.75" primary tube diameter, with or without heat exchangers. Their proprietary twin inlet muffler built specifically for your street or race application is also included in this complete exhaust system. The kit for the naturally aspirated Porsche 911 includes all necessary hardware, gaskets and accessroies ne...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1974-77
$3,866.07
Make a selection
B&b started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded us impressive horsepower and torque gains throughout the entire power band. Headers and muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Included in the kit is the header set, 1.625" or 1.75" primary tube diameter, with or without heat exchangers. Their proprietary twin inlet muffler built specifically for your street or race application is also included in this complete exhaust system. The kit for the naturally aspirated Porsche 911 includes all necessary hardware, gaskets and accessroies ne...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1974-77
$4,398.54
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,788.24
Make a selection
Fabspeed;s performance headers are perfect for the 987.2 owner looking for more power across the entire rpm range and a more aggressive exhaust sound. Their 304 stainless system consists mandrel bends that are optimized for maximum flow. These fabspeed headers remove the cats for even more performance gains.
Features
Fits all 987.2 Boxster/Cayman/spider vehicles 09-12
Gaskets included.
Equal length t304 stainless steel c.n.c. Mandrel bent header pipes for better torque and equalized engine pulsing and maximum exhaust flow.
F1/nascar/indycar style high velocity merge collectors.
More power and torque across the rpm band and dramatically improved sports car sound.
Si...(choose a part on the right to read more)
General Fitment BOXSTER 2009-11 CAYMAN 2009-12
$2,821.45
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$10,136.02
Make a selection
Product details:
Equal-length headers provide improved torque and equalized engine pulsing thanks to industry-exclusive mandrel-bent primary tubes, gaskets included.
Features:
-fits all Porsche 996 Carrera vehicles 1998-2005
-improves horsepower and torque by 15 whp and 12 ft-lbs
-saves 2 lbs from the rear of the vehicle
-one piece cnc mandrel-bent primary tubes provide maximum uninterrupted flow
-f1-style merge collectors provide optimized exhaust scavenging
-improves power and torque throughout the rpm range
-direct replacement for the factory headers
-simple diy bolt-on installation
-all fabspeed performance products are backed by the fabspeed life...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1998-05
From $1,722.60
Make a selection
Product details:
High-performance x-pipe replaces the OEM catalytic converters with 200-cell hjs sport cats for improved power and sound.
Features:
-fits all Porsche 993 Carrera vehicles (1994-1998)
-includes German-manufactured 200-cell hjs sport catalytic converters for improved power and sound
-adds 12 whp and 19 ft-lbs of torque
-saves 8 lbs from the rear of the vehicle
-constructed from cnc mandrel-bent t304l stainless steel for maximum quality, performance and durability
-simply bolt-on installation; no cutting or welding required
-includes all required hardware and gaskets
-all fabspeed performance products are backed by the fabspeed...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,046.60
Make a selection
Performance composite exhaust gaskets replace the OEM or aftermarket gaskets for a better seal and improved longevity
Features:
Fits OEM and oem-style factory exhaust systems
Made from high temperature material for maximum quality and durability
Simple installation
General Fitment 911 GT3 2003-05 911 1998-05
From $86.40
Make a selection
FVD 997.2 GT3 4.1- level 3 kit - max. Power - 500 hp (368 kw) @ 8100 rpm - max. Torque - 354 lb ft (480 nm) @ 5650 rpm - max. Speed - 198 mph (320 kph) - max. Rpm - 8600 rpm - acceleration 0-100 kph (0-62 mph)* - 3.7s * based on German tests done with kph. 100 kph = 62.137 mph the FVD conversion kit includes: - 4.1 liter pistons & cylinders - ecu software (handheld flash programmer) - sport air filter - complete engine gasket set - all necessary FVD designed hardware. (includes spark plugs, bolts, nuts, etc.) further additional parts/work required: - connection rods (22mm pin) FVD10397520 - modification of the water housing - modification of the customer's original crankcase we recommend the use of an m&m exha...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $15,700.44
Make a selection
Product details:
Free-flowing headers without catalytic converters; designed for maximum power and exhaust flow for race and track applications.
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-constructed from equal-length t304 stainless steel c.n.c. Mandrel-bent tubing for improved torque and equalized engine pulsing
-more power and torque across the rpm band and dramatically improved sports car sound
-composite gaskets are included for a leak proof seal
-direct replacement for the OEM headers with no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note: the 98...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $2,154.60
Make a selection
High-quality performance headers provide better boost response and power throughout the rpm range
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
Improves power and throttle response
High-velocity 3-into-1 merge collectors for maximum performance
Equal-length tubing for improved exhaust travel
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
Direct replacement for the restrictive OEM headers
Reuse of factory OEM header gaskets is required.
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 2005-08 911 TURBO/GT2 2007-09
From $1,722.60
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range, gaskets included.
Features:
-fits all Porsche 996 GT2 vehicles (2001-2005)
-increases horsepower and torque by 12 whp and 14 ft-lbs
-features 3-into-1 high velocity merge collector
-equal length tubing for improved exhaust travel
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-direct replacement for factory headers
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 TURBO/GT2 2001-05
From $1,722.60
Make a selection
Simplify your exhaust installation with one of our pre-packaged installation kits. Each kit includes new installation hardware and gaskets (where necessary).
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
From $164.81
Make a selection
This is a race proven exhaust system suitable for the street. You'll see a 7 - 15% increase in horsepower depending on what other modifications you have made to your engine. we have made minor changes to the basic design to allow it to be used with ported heads for modified engines. While some people believe "bigger is better", we have found that the 1 1/2" tube gives you the horse power and torque in the power band of your engine. Mate with our super trap muffler for the ultimate in sound and poser rst4462517 specify engine size when ordering.
Includes 1x collector, 1x reducer, 1x collector gasket, 1x pinch nut assembly: 1x nut, bolt, washer
Sae 5/16 x18 hardware.
General Fitment 914 1970-76
Simplify your exhaust installation with one of our pre-packaged installation kits. Each kit includes new installation hardware and gaskets (where necessary).
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
From $454.08
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|