PORSCHE 924 S BACK LENS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Product details:
Replaces blower motor assembly and ductwork while allowing plenty of heat; replicated from factory rs part
Features:
-fits all 964 Carrera vehicles (1989-1994)
-saves 8 lbs from rear of vehicle
-replica of the Porsche rs lightweight factory heat duct
-factory Porsche part is roto-formed plastic with parting lines where as the fabspeed rs heater pipe is genuine carbon fiber.
-replaces blower motor assembly/ductwork and still allows heat in the cabin.
-improves aesthetic value with clear coated carbon fiber tube.
-easy 20 minute diy install
-all fabspeed performance products are backed by the fabspeed lifetime limited warra...(choose a part on the right to read more)
General Fitment 911 1989-94
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-199
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all r...(choose a part on the right to read more)
General Fitment 911 1989-94
From $4,098.60
Make a selection
What good is more horsepower if it isn't transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more 'bite' while increasing reliability and performance.
Applications: street, drag, pulling, autocross. Features s...(choose a part on the right to read more)
General Fitment 911 1987-89
From $863.95
Make a selection
Product details:
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
-fits all 986 Boxster / s vehicles (1997-2004), slight modifications to the factory coolant line are required on vehicles equipped with a tiptronic transmission.
-includes 200-cell hjs sport catalytic converters for maximum performance
-adds 8 whp and 4 ft-lbs of torque when installed with fabspeed’s maxflo performance exhaust system
-equal length cnc mandrel-bent primary tubes and f1-style high velocity merge collectors ensure maximum flow characteristics
-simple ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $3,126.60
Make a selection
Product details:
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-includes German-imported 200-cell hjs sport catalytic converters for maximum performance
-constructed from equal-length t304 stainless steel c.n.c. Mandrel-bent tubing for improved torque and equalized engine pulsing
-more power and torque across the rpm band and dramatically improved sports car sound
-composite gaskets are included for a leak proof seal
-direct replacement for the OEM headers with no cutting or welding ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $3,126.60
Make a selection
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. The included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. Lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Features:
Saves 11.45 lbs. / 5.2 kg
Dramatic improvement in sports car sound and power throughout the rpm range
Constructed from high-quality 14-16 gauge c.n.c. Mandrel bent t304l st...(choose a part on the right to read more)
General Fitment 911 2009-12
$10,175.60
Make a selection
Product details:
Replaces blower motor assembly and ductwork while still allowing plenty of heat, just like the factory rs part
Features:
-fits all Porsche 993 vehicles (1994-1998)
-saves 9 lbs from the rear of the car
-full carbon fiber construction
-simple diy installation
-this a replica of the Porsche Germany rs lightweight factory heat duct that was used on all 3.6 liter special rs lightweight race cars.
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note:
All late model 993's, 1996-1998 require the Porsche factory 964 fan shroud, part # 96410640302
General Fitment 911 1994-98
Product details:
Equal-length headers provide improved torque and equalized engine pulsing thanks to industry-exclusive mandrel-bent primary tubes, gaskets included.
Features:
-fits all Porsche 996 GT3 vehicles (1999-2005)
-one piece cnc mandrel-bent primary tubes provide maximum uninterrupted flow
-f1-style merge collectors provide optimized exhaust scavenging
-improves power and torque throughout the rpm range
-direct replacement for the factory headers on all 996 GT3
-simple diy bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 GT3 2003-05
$1,938.60
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 996 Carrera; includes maxflo performance exhaust, sportcat x-pipe, performance headers, competition intake, evomsit ecu tune & deluxe quad-style tips.
Fabspeed’s 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motor sport headers. lastly, the restrictive factory airbox is replaced by fabspeed’s carbon fiber competition intake sys...(choose a part on the right to read more)
General Fitment 911 1998-05
$8,418.60
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 997 Carrera; includes maxflo performance exhaust, sportcat x-pipe, performance headers, competition intake, evomsit ecu tune & deluxe quad-style tips. Fabspeed’s 997 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motor sport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air ...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,418.60
Make a selection
FVD Brombacher955 Cayenne turbo tt ihi 16/24 ?700 series? Upgraded turbos.
Specifications:
- new, lightened and larger compressor wheel with extended tip to reduce backpressure. ( 46.5 mm inducer).
- cnc re-profiled compressor housing.
- optimized compressor side gap
- these turbos are the ihi size equivalent to the kkk 16/24 ? As a reference.
- up to 50% more power compared to the factory turbo?s!
- manufactured by ihi certified technicians.
- free software update for those already running FVD software
Combined with our proprietary software, exhaust, bmc drop in filter, and other engine components you can achieve 700+ crank hp.
General Fitment CAYENNE 2003-06
$4,573.48
Make a selection
FVD Brombacher957 Cayenne turbo tt ihi ?16/24? ?700 series? Upgraded turbos.
Specifications:
- new, lightened and larger billet compressor wheel with state of the art ?extended tip?. ( 46.5 mm inducer).
- these turbos are the ihi size equivalent to the kkk 16/24 ? As a reference.
- cnc re-profiled compressor housing and backplate.
- optimized clearances.
- re-uses factory vacuum unit (wastegates).**
- up to 50% more power compared to the factory turbo?s!
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- remanufactured by ihi certif...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14 CAYENNE 2007-10
$2,627.32
Make a selection
Rear toe control arms - order in pairs only restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can't compensate enough when lowering your Porsche, leaving you stuck with as much as ½ of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.
This item may need...(choose a part on the right to read more)
Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white.
View/Change Diagram
By ordering this part number you get after previous sending in
Your wishbone overhauled with new race-silent blocs back.
The race-sílent blocs (85 shore) give you more stable driving.
Should it not be repairable, we will inform you immediately.
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), turbo-look (91-94), c4 (89-94), c2 (90-94)
General Fitment 911 1989-94
By ordering this part number you get after previous sending in
Your wishbone overhauled with new race-silent blocs back.
The race-sílent blocs (85 shore) give you more stable driving.
Should it not be repairable, we will inform you immediately.
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), turbo-look (91-94), c4 (89-94), c2 (90-94)
General Fitment 911 1989-94
By ordering this part number you get after previous sending in
Your wishbone overhauled with new race-silent blocs back.
The race-sílent blocs (85 shore) give you more stable driving.
Should it not be repairable, we will inform you immediately.
General Fitment 968 1992-95 944 1982-85 944 1985-88
By ordering this part number you get after previous sending in your wishbone overhauled with new race-silent blocs back. The race-silent blocs (85 shore) give you more stable driving. Should it not be repairable, we will inform you immediately.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
By ordering this part number you get after previous sending in your wishbone overhauled with new race-silent blocs back.
The race-sílent blocs (85 shore) give you more stable driving.
Should it not be repairable, we will inform you immediately.
General Fitment 968 1992-95 944 1982-85 944 1985-88
The ipd Boxster s/Cayman s "competition" plenum was designed to meet the needs of the most demanding enthusiasts. The "competition" plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "competition" version is designed to work with both bone stock Boxster s/Cayman s but produces even more horsepower gains (20+) with Boxster s/Cayman s already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Installation is relatively easy and straight forward for mechanically inclined diy customers although ipd strongly recommends having a qualified Porsche technic...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08 BOXSTER 2005-08
If you agree with the "work smarter, not harder" philosophy, then you owe it to yourself to look at the auto rotisserie with e-z spin. The exclusive "spring-loaded locking pin" system means that a single person can safely rotate a well-balanced and secured vehicle. They've engineered a versatile tool that allows you to securely bring your work to the desired height, then rotate it to the best angle for the task at hand. Save time, money. And your back! The e-z spin feature means you'll expend a lot less energy in rotating the car to your desired position. The included hydraulic jacks make adjustment upward easier and more precise, but you can also lower your work in a very controlled and safety conscious ...(choose a part on the right to read more)
General Fitment ACCESSORY
$3,094.20
Make a selection
Automotive applications of titanium follow logically from the high strength, low density and low modulus of titanium and its alloys, and their excellent resistance to corrosion and oxidation. The performance benefits of titanium in automotive applications have been established and widely reported over many years, and are not an issue titanium works!
However, use of the metal has been limited to racing cars and a few top of the range road models because of cost. In the us, the environmental agencies now require guaranteed corrosion resistance on exhaust systems to upwards of 100,000 miles. Titanium easily achieves this requirement and surpasses the stainless steel (409) systems currently in place. A typica...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$5,686.20
Make a selection
Automotive applications of titanium follow logically from the high strength, low density and low modulus of titanium and its alloys, and their excellent resistance to corrosion and oxidation. The performance benefits of titanium in automotive applications have been established and widely reported over many years, and are not an issue titanium works!
However, use of the metal has been limited to racing cars and a few top of the range road models because of cost. In the us, the environmental agencies now require guaranteed corrosion resistance on exhaust systems to upwards of 100,000 miles. Titanium easily achieves this requirement and surpasses the stainless steel (409) systems currently in place. A typica...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08
$4,228.20
Make a selection
This complete sport exhaust system with equal length long tube headers and with integrated tri-metal big volume 200 cell highflow hd catalytic converters has been developed and tested to the highest standard on the dyno. The silencers are designed as absorptive silencers which reduce exhaust back pressure drastically. In combination with a pair of highflow 2x tri-metal big volume 200 cell highflow hd catalytic converters the result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced acoustic and weight reduction. All parts mounted with aeroquip-fittings providing perfect sealing combined with flexibility. Connection pi...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,690.23
Make a selection
Pagid racing compounds are complex formulations with very high content of ceramic materials. The difference to competitors metallic compounds is the superior thermal insulation and the higher heat resistance of ceramic compared to iron. Ceramic has a very low heat conductivity, so less brake disc temperature goes through the pad to the caliper. Pagid have measured up to 140 degrees farenheit difference in temperature compared to competitor pads.
Pagid uses a unique and patented system to ensure the friction material does not delaminate from the steel backing plate. The friction material is attached to the backing plate in two ways, adhesive bonding and mechanical retention. Pagid is the only race pad that...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|