PORSCHE 924 S CIS AIR BOX
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Group 2 + 3 seat for children from 33 - 80 lbs. / approx. 3,5 to 12 years of age. . Porsche child seats can be fitted into position quickly and securely using the standard north american latch fastening system in conjunction with the Porsche child seat fastener system which needs to be installed through your authorized Porsche dealer. Telescopic bars on the child seat lock into place between the backrest and the seat and hold it firmly to the passenger seat. Child seats may only be used in the Boxster, 911 or Cayman on the passenger seat in conjunction with the child seat fastener system. To avoid the risk of injury from a deploying airbag, never place a child age 12 or under in a front seating position without...(choose a part on the right to read more)
General Fitment ACCESSORY
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. The included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. Lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Features:
Saves 11.45 lbs. / 5.2 kg
Dramatic improvement in sports car sound and power throughout the rpm range
Constructed from high-quality 14-16 gauge c.n.c. Mandrel bent t304l st...(choose a part on the right to read more)
General Fitment 911 2009-12
$10,175.60
Make a selection
The girodisc system is a direct replacement for the oe disc on all 987 Caymans/Boxsters equipped with pccb rotors from the factory.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by girodisc in the usa to girodisc own specifications and cadmium plated fo...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,749.60
Make a selection
Enhance the race-inspired design of your Boxster or Boxster s with our aluminum-look paint trim. Complete interior kits includes instrument surround, center air vents, side vents, door trim covers, steering wheel, handbrake lever; kits are very complete. Simple installation. Must specify color code or interior leather for exact match and seamless matching interior. Add $255.00 for any color except black. Tiptronic add an additional $90.00. Separate pieces can be special ordered, call for individual pieces.
$4,378.50
Make a selection
Agency power has developed a new cold air intake kit for the v8 Porsche Cayenne. dubbed "the stealth" system, the agency power cold air intake adds power to your Cayenne s or GTS from 03-11. the intake kit is designed to replace the entire factory airbox from the maf tubes to the filter. each intake tube is hand made here in the usa using precision jigs with 6061 aluminum that is tig welded. the intake tubes attach to the factory maf sensor with the supplied silicone coupler. each intake tube features a custom spec'd K&N cone filter with front inlet to draw air in from the OEM ducting. because of the close proximity to the engine, we also include OEM mounted heat shields that securely connect the intak...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10 CAYENNE 2003-06
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,610.92
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,569.05
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$10,702.69
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$10,136.02
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$13,305.60
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $9,338.87
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$10,791.79
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,788.24
Make a selection
Replace your restrictive air box and filter with a powerflow kit for improved air volume and velocity, and increased horsepower. A better breathing engine also gives you faster throttle response. Each design has been flow bench and engine dyno tested to assure maximum performance. Powerflow kits include the powerflow intake unit, lifetime air filter, instructions, and all hardware.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 911 1998-05
$6,048.79
Make a selection
B&b headers Porsche Boxster 97-99
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and street development invested into...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,534.12
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,374.00
Make a selection
Replace factory airbox and throttle body inlet pipe to lower intake temperature, increase power, and improve engine intake sound
Features:
Fits all Porsche 987.2 Boxster/Cayman vehicles (2009-2012)
Increases fuel economy
Cleans up and de-clutters engine bay for easier servicing
Dramatic power increase throughout rpm range
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
Disclaimer: fabspeed recommends having this intake system installed by a qualified technician, as the engine must be lowered from the vehicle in order to remove the factory air box in one piece. alternatively, the factory air box can be cut into s...(choose a part on the right to read more)
General Fitment CAYMAN 2009-12 BOXSTER 2009-11
From $858.60
Make a selection
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. The included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. Lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Features:
Saves 11.45 lbs. / 5.2 kg
Dramatic improvement in sports car sound and power throughout the rpm range
Constructed from high-quality 14-16 gauge c.n.c. Mandrel bent t304l st...(choose a part on the right to read more)
General Fitment 911 2009-12
$10,175.60
Make a selection
Fabspeed motorsport Carrera cup hi-performance cover lid works with your stock OEM airbox. You simply remove your stock airbox cover and reuse your stock air filter, K&N air filter or install a bmc f1 for an additional $90.
Key features
Fits all 993 tt vehicles 1995-1998
+10hp and simple installation on 993tt.
+8hp and installs in less than 5 minutes on 993.
The most cost effective and simplest air intake modification on the market.
More power guaranteed and power you can feel.
More sports car sound with better throttle response
Dont be fooled! Flat style filter system like our cup airbox are 99% of the time better then any cone filter system. The stock 993 airbox bottom h...(choose a part on the right to read more)
General Fitment 911 1994-98
From $189.00
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 996 Carrera; includes maxflo performance exhaust, sportcat x-pipe, performance headers, competition intake, evomsit ecu tune & deluxe quad-style tips.
Fabspeed’s 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motor sport headers. lastly, the restrictive factory airbox is replaced by fabspeed’s carbon fiber competition intake sys...(choose a part on the right to read more)
General Fitment 911 1998-05
$8,418.60
Make a selection
Rigid sintered plate with special organic racing facings for Boxster and Cayman. offers up to 550 newton meters of gripping power. offering superior grip and snappier performance over stock clutch discs. perfect when paired with a lightweight flywheel. this kit includes clutch disc, pressure plate, clutch release bearing, and grease.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment BOXSTER 2005-08 CAYMAN 2006-08 BOXSTER 1997-04
$1,029.35
Make a selection
This silicone hose supplies hot air to the heater control box, it replaces original part # 930 211 622 01. It runs from the exhaust heat exchanger to the heater control box. We recommend replacing the heater box clamp, part # 90121105122 on one end and a hose clamp part # 99951234902 on the other end. Sold individually. 2 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Replace your restrictive air box and filter with a powerflow kit for improved air volume and velocity, and increased horsepower. A better breathing engine also gives you faster throttle response. Each design has been flow bench and engine dyno tested to assure maximum performance. Powerflow kits include the powerflow intake unit, lifetime air filter, instructions, and all hardware.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Replace your restrictive air box and filter with a powerflow kit for improved air volume and velocity, and increased horsepower. A better breathing engine also gives you faster throttle response. Each design has been flow bench and engine dyno tested to assure maximum performance. Powerflow kits include the powerflow intake unit, lifetime air filter, instructions, and all hardware.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|