PORSCHE BOXSTER SSI EXHAUST
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Brombacher sport muffler for 997.2 GT3 / rs (sound version) with rsr style tips facts: - + 10 crank hp & + 10 crank torque - 2 3/4 tubing (70mm) straight through design for max. Power - weighs 28 lbs. (12.7 kg) - replaces stock side mufflers and stock center muffler - 36 lbs (16.3 kg) savings over stock system! - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - 2 x 3.5 (90mm) rsr angle cut tips - includes all necessary clamps and mounting brackets - made in Germany - 105 db - intoxicating cup car growl at idle, partial throttle and wide open throttle - no interior resonance - no dme programming necessary, does not alter emissions, 50 state legal in the u.s. For reference: 997 GT3 OEM ...(choose a part on the right to read more)
$3,175.10
Make a selection
Brombacher 997.2 tt "sport stock" (TUV version) muffler for OEM cats
Facts:
- + 6 crank hp & + 5 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 3 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:the 99...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,945.25
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,710.79
Make a selection
Brombacher 997.2 tt "cat-back" (sound version) muffler for OEM cats
Facts:
- up to 25 crank hp & + 25 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 5 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:t...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,945.25
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $9,324.32
Make a selection
Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound.
Features:
This cargraphic sport ...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14
$5,449.58
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$5,218.29
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,492.03
Make a selection
M&m street-sport muffler system for 2009- 997.2 / 997.2s
Facts:
- + 15 crank hp & + 13 crank torque
- 2 ½” (63.5 mm) diameter tubing (reduces thermal stress)
- replaces OEM primary and secondary mufflers
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- weighs 20.94 lbs. (9.5 kg)
- 33 lb. Weight savings over factory system
- t 316 stainless steel for improved durability over t 304
- uses the spring lock race system design to dampen vibration
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust (3.6 l models will require 3.8 l tips due to diameter diff...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,793.95
Make a selection
Re-issue of autobooks manual covering engine, fuel & cooling systems, ignition, heating, exhaust emissions, clutch, transmission, rear axle, suspension, steering gear, brakes, electronics, and bodywork. This is a manual that will help keep 912 on the road. A must for any 912 owner.
General Fitment ACCESSORY
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Brombacher titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
This system is complete from titanium because it is without any catalytic.
. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat value titanium available (1000 degrees celcius) and has a much greater wall thickness than 75% of the systems on the m...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$9,421.34
Make a selection
B&b mufflers Porsche Cayenne s 04-07
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and street development invested i...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$4,045.79
Make a selection
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Headers are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed!
Features:
100% t304 stainless steel
General Fitment 911 1974-77
$2,497.08
Make a selection
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Headers are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed!
Features:
100% t304 stainless steel
General Fitment 911 1984-86
$2,128.75
Make a selection
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Headers are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed!
Features:
100% t304 stainless steel
General Fitment 911 1974-77
$2,128.75
Make a selection
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Headers are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed!
Features:
100% t304 stainless steel
General Fitment 911 1984-86 911 1974-77
$1,827.13
Make a selection
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Headers are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed!
Features:
100% t304 stainless steel
General Fitment 911 1984-86 911 1974-77
$1,938.78
Make a selection
B&b mufflers 4.5" oval tips Porsche 996 Carrera 04
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and street develop...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,021.44
Make a selection
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Headers are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed!
Features:
100% t304 stainless steel
General Fitment 911 1984-86 911 1974-77
$1,827.13
Make a selection
B&b exhaust mufflers Porsche 997 Carrera 05+
Billy boat performance exhaust has again taken the aftermarket pole position by designing a revolutionary t-304 stainless steel performance muffler system specifically for the Porsche 997. As a direct replacement for factory equipment, this hand made system is designed to build more torque and horsepower with increased flow and decreased restriction. The Porsche 997 gains mid-range to top-end performance and has an aggressive, yet not an intrusive, exhaust sound.
each billy boat performance exhaust system is custom-tuned to match its application for the best sound quality and performance combination. Our mufflers are designed to reduce annoying interio...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,883.69
Make a selection
Billy boat performance exhaust high performance stainless steel exhaust components for the 2006-2008 Porsche 997 turbo will enhance the driving experience of your Porsche. The mufflers are designed to be used with the stock exhaust tips. For a sportier note the design team at b&b also developed a set of primary muffler bypass pipes that will not only increase the sound they also give you added performance. New for 2010 the mufflers and pipes are avialable in a satin finish or in a polished ke finish. All of these components have no effect on the factory warranty or emissions.
Billy boat performance exhaust line of performance exhaust for the Porsche 997 turbo incorporates the latest in resonance control t...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,943.98
Make a selection
Billy boat performance exhaust high performance stainless steel exhaust components for the 2009 and up Porsche 997/997s will enhance the driving experience of your Porsche. The mufflers are designed to be used with the stock exhaust tips or you can get a more distinctive look with b&b_s quad round double wall tips. For a sportier note the design team at b&b also developed a set of primary muffler bypass pipes that will not only increase the sound they also give you added performance over the mufflers alone. New for 2010 the mufflers and pipes come standard in a satin finish while the optional tips are polished to a mirror like finish. All of these components have no effect on the factory warranty or emissions. ...(choose a part on the right to read more)
General Fitment 911 2009-12
$3,544.04
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|