PORSCHE 944 S2 END CAP
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Complete halogen headlight that includes a lens, gasket, h1 bulb, electric motor for headlight levelling, end cap, retaining bar and connector housing. It is complete and ready for installation. Sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
From $1,304.00
Make a selection
If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle actually starting. Eventually you hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter be sure to check the rubber cap on the terminal for cracks which allows moisture in and it is a good idea to check your starters hardware as well. This is the latest supersession from the manufacturer. For the early air cooled car restorations, please note that the housing looks different than the original. Sold individually. This is a new starter so a core charge is not applied.
This item may need to be sourced from ger...(choose a part on the right to read more)
View/Change Diagram
From $273.00
Make a selection
If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle starting. Eventually, you will hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter, be sure to check the protection cap on the terminal for cracks which allows moisture in and causes pre-mature failure. High-quality denso OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to a...(choose a part on the right to read more)
Agency power is proud to release its new GT2rs inspired 1 piece monoblock wheel for the Porsche 996 and 997 widebody cars. The multi-spoke design features offset windows and uniquely designed curved elements to the center of the wheel. These wheels are only available in 19x8.5 and 19x12 and are sold as a set of 4.
The rear wheel offers a more aggressive concavity with an equally stunning front fitment. The front wheel weighs 21lbs where the rear weighs 24lbs. Our wheels are built for a more aggressive look and fitment to truly sit flush with the fender wells. The wheels are designed to work with OEM lug bolts and do not require spacers. Each wheel includes your choice of ap engraved center cap color, or you ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 2005-08
$4,463.50
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,195.19
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$10,326.86
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,442.13
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,854.46
Make a selection
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,232.34
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$5,218.29
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$10,492.02
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,710.79
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,492.03
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra he...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,578.11
Make a selection
Kit includes:
Software fast load, sport air filter, header system, TUV sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 281kw (382hp) @ 6500rpm
Max. Torque - 430nm (317lbf ft) @ 4500rpm
Max. Speed - 305km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.5s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the yea...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,600.60
Make a selection
FVD?s ims bearing vs. The competition:
There is a lot of information online about ims bearing failures, why they occur, how to detect them, how to install an aftermarket bearing, etc. So there is no need for us to go into depth on the subject. Our stance is to sell a top of the line bearing produced to higher specifications than what was originally in the car and is currently available on the market.
FVD ims bearings are manufactured by skf in Germany and are highest rated skf ?super-precision? Class of bearings which are characterized by:
High-speed capability
High load carrying capacity
High stiffness
Low friction
Our single row ceramic bearings consist of the highest grade ball material which...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
4 puck sintered metallic material which has a higher thermal capacity than organic friction material. Rigid center hub. Aggressive start performance. Direct replacement for the oe clutch disc. Made in Germany by zf sachs race engineering. Weighs: 2.42 lbs. (1.1 kg) please note: due the aggressive start performance of the sintered disc, we do not recommend this disc for street cars. We also recommend that you purchase a sport / racing pressure plate in conjunction with this disc. This can fit the rs cars but we would recommend the 962 disc, part # FVD 116 838 for the 964 and 993 rs models. The sachs racing clutch discs with sintered metal plates have a higher friction coefficient than plates with organic frictio...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1994-98 911 1989-94
From $484.22
Make a selection
Whether you are restoring a tribute car or endurance racing your 911, this tank will fit the bill. It is made in Germany from pvc plastic and includes high grade threaded brass inserts. It is build by fia specs and can be adapted to work in all 911's from 67-89. It holds a capacity of 29 gallons or 110 liters.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$3,218.99
Make a selection
The perfect complement for a numeric racing short shift upgrade or a factory cable replacement. These numeric racing cables are motorsports quality that enhance the driving experience by providing a direct, mechanical connection to your car. They provide precision gear engagement that works seamlessly with the numeric racing short shift upgrade. Features: larger diameter steel spiral wound cable direct connection to each shift greater reliability precise engagement pre-lubricated for smooth operation billet aluminum and stainless-steel connectors eliminates excessive cable backlash for longevity billet aluminum rod ends thermo plastic jacket warranty included please note: professional installation is recommende...(choose a part on the right to read more)
The perfect complement for a numeric racing short shift upgrade or a factory cable replacement. These numeric racing cables are motorsports quality that enhance the driving experience by providing a direct, mechanical connection to your car. They provide precision gear engagement that works seamlessly with the numeric racing short shift upgrade. Features: larger diameter steel spiral wound cable direct connection to each shift greater reliability precise engagement pre-lubricated for smooth operation billet aluminum and stainless-steel connectors eliminates excessive cable backlash for longevity billet aluminum rod ends thermo plastic jacket warranty included please note: professional installation is recommende...(choose a part on the right to read more)
The moshammer front bumper upper air vent is a combination of aggressive styling, aero-efficiency and increased cooling capacity. It is a motorsport finishing touch that complements the entire evo rs (991.2 turbo/s) / stormforce (991.1) / stormforce evo rs (991.2) or downforce rs (991.1 turbo/s) aero packages. FVD Brombacherhas a tradition of offering exclusive body styling that is functional, easily installed, wind tunnel tested, German made and TUV approved. Those high standards naturally led us to the moshammer brand. The moshammer aero styling brand has become a leader in the premium automotive segment. Each part is precision designed and manufactured in Germany for perfect fitment, superior durability and...(choose a part on the right to read more)
We recommend replacing ignition wires regularly. Heat causes cracks in wiring and caps which creates loss of power and misfires. These cables are a high-quality OEM replacement, designed to fit and perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold as a set. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
kit includes:
Sport motronic dme exch, sportairfilter (2), Cayenne turbo 70mm GT sport exhaust system, sport turbochargers (2).
FVD level 4 kit for the Cayenne turbo produces 600bhp while keeping stock driveability! This kit is the ultimate Cayenne turbo kit for both performance and sound!
Genuine:
Engine - v8 twin-turbo
Capacity - 4511ccm
Compression ratio - 9,5:1
Max. Power - 331kw (450hp) @ 6000rpm
Max. Torque - 620nm (457 lbf ft) @ 2250-4750rpm
Max. Speed - 266km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 441kw (600hp) @ 6000rpm
Max. Torque - 800nm (590 lbf ft) @ 4000rpm
Max. Speed - 300km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
- a sim...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$24,160.76
Make a selection
With only an FVD sport motronic and sport filters you can increase your Cayenne horsepower to 270 (a 20 hp gain!). Even with this added power your Cayenne will retain factory drivability and day in, day out reliability.
Kit includes:
Ecu software with handheld flashtool, 2x sport air filter
Genuine:
Engine - v6
Capacity - 3189ccm
Compression ratio - 11,5:1
Max. Power - 184kw (250hp) @ 6000rpm
Max. Torque - 310nm @ 2500-5500rpm
Max. Speed - 214km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 9.7s
Tuning:
Max. Power - 199kw (270hp) @ 6000rpm
Max. Torque - 335nm @ 4000-5000rpm
Max. Speed - 220km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 9.2s
- a simple handheld obd2 tool is provided t...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$1,142.30
Make a selection
kit includes:
Ecu software with flashclient cable., sport air filters (2), GT sport exhaust system including installation kit, sport intercoolers and upgraded sport turbchargers for the ultimate in Cayenne performance
Factory:
Engine - v8 twin-turbo
Capacity - 4806ccm
Compression ratio - 10,5:1
Max. Power - 368kw (500hp) @ 6000rpm
Max. Torque - 700nm (516 lbf ft) @ 2250-4500rpm
Max. Speed - 275km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.1s
Tuning:
Max. Power - 650 hp @ 4470rpm
Max. Torque - 1030 nm (760 lb. Ft) @ 4320rpm
Max. Speed - 310km/h
Max. Rpm - 6700upm
Acceleration 0-100km/h - 4,1s
For 27 + years, FVD-Brombacherhas been setting the standard for PorscheĀ® engine bui...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$24,221.75
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|