PORSCHE 924 S HARD PARTS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
The original plastic part is fragile and deteriorates rapidly and failure is catastrophic. This new design incorporates an all aluminum construction that is vastly more robust than the original plastic part. It has been designed to last the lifetime of the vehicle and will tolerate multiple hose replacements. Installation is the same as the original part and includes new stainless steel mounting hardware.
View/Change Diagram
From $7.58
Make a selection
We are proud to offer a wide assortment of OEM Porsche parts. Nobody knows more about your car, then its creators themselves. You dont have to question the build quality, attention to detail, or reliability of these. Why trust anyone else?
complete conversion kit, comes with a full set of ceramic rotors, yellow calipers, pads, and all other necessary hardware to convert your Carrera s. Saves weight, resists brake fading, and adds huge 350 mm rotors.
The pccb disc is made from a specially treated carbon fiber compound that is not only much harder than steel, but also more resistant to temperature. The discs are gripped by six-piston monobloc aluminum calipers at the front and four-piston units at th...(choose a part on the right to read more)
General Fitment 911 2005-08
From $22,727.03
Make a selection
This early 914 door panel hardware kit includes all of the hardware you would require to install a fresh door panel. if you are going to have your door cards recovered, why tarnish the new appearance with oxidized hardware and broken clips? includes a variety of critical parts to connect the door panel to the door. One kit needed per door, two per car.
If you are looking for this kit to fit your 1975-1976 914, please refer to part # baa556
Kit consists of:
9 - r823867299 - door panel clip; 924 1976-79 - normally $9.45
2 - r90006711101 - allen bolt 5x22 - normally $2.10
2 - r99950731802 - speed nut-cage nut 5mm - normally $9.46
3 - r99959110212 - chrome cup washer 914 door pocket - normally...(choose a part on the right to read more)
General Fitment 914 1970-76
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency tÜv; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result...(choose a part on the right to read more)
General Fitment 911 1970-73
$5,625.36
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,944.32
Make a selection
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
$1,911.53
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$10,326.86
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$21,059.12
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,336.55
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell hdl German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming not ne...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,898.36
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,411.41
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$7,345.80
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,854.46
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,976.66
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,932.77
Make a selection
Brombacher edition valved mufflers are the perfect compromise for you and your loved ones. This set of mufflers offers Porsche® cup car like decibels with low, deep tones along with gurgling and crackling with the valves open. Mayhem can then be reined in, to subtle, OEM decibels with the valves closed. So, the best of both worlds are on tap for many happy Porsche® excursions.
+ 10 hp & + 8 tq gain.
- 2 1/2" (63.5 mm) tubing diameter (reduces thermal stress).
- t 316 stainless steel for improved durability over t 304.
- absolutely no drone in the cabin with or without the valves open.
- does not interfere with emissions and will not trigger the check engine light.
- ecu programming (software) is n...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,333.44
Make a selection
TUV version
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90mm) tips and are made for this muffler. Kindly order bes 997 160 41s separately.
FVD le...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,753.06
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$10,492.02
Make a selection
- + 25 crank hp & + 19 crank torque (manufacturer estimate, dyno testing information will be available shortly)
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 2 3/4"(70mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programm...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$9,638.48
Make a selection
Brombacher 997.2 tt "sport stock" stainless steel, cat bypass for OEM muffler facts: - + 21 crank hp & + 18 crank torque** - reuses OEM muffler, perfect for those looking for more sound and power. - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 6 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell or 200 cell. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programmin is necessary. - reuses OEM tips. FVD i...(choose a part on the right to read more)
Brombacher 997.2 tt ?sport stock? Stainless steel, cat bypass for OEM muffler
Facts:
- + 21 crank hp & + 18 crank torque**
- reuses OEM muffler, perfect for those looking for more sound and power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- reduces backpressure and thermal stress
- 6 on a scale of 1-10 in volume (1 being stock).
- reuses OEM v band style connecting hardware.
- made in Germany.
- available in 100 cell or 200 cell. Please ask your sales person for pricing.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programmin is necessary.
- reuses OEM tips.
Fv...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,079.36
Make a selection
Brombacher 997.2 tt "sport " stainless steel, sport cat converter replacements for our bes- muffler facts: - + 21 crank hp & + 18 crank torque** - 200 cell "hd", tri metal German hjs sport catalysts - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 5 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell and cat bypass. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programming not necessary. - reuses OEM ti...(choose a part on the right to read more)
$4,518.36
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,710.79
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,223.38
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,492.03
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|