PORSCHE 986 V FLOW
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Exhaust systems have a tough life. Outside, they face salt, mud, water, crud, rocks, among other road hazards! Internally, they experience unburned hydrocarbons, acids, and moisture. All borla systems feature tough 16 gauge t-304 stainless steel construction. It's so tough that borla backs each system with a million mile warranty. Cat back systems run from the rear of the catalytic converter to the end of your vehicle. Adds throaty sound characteristics and provides mild performance gains with tuned exhaust flow.
Notes
* unless otherwise stated, all exhausts are cat-back systems.
* note: actual part may vary from photo shown.
General Fitment BOXSTER 1997-04
$1,363.90
Make a selection
An interesting fact: did you know the factory thermostat doesn't start to even open until 186.8f and doesn't fully open until almost 210f? did you also know that the new '09 dfi engines run a 176f thermostat? Or how about factory turbo, GT2, and GT3 engines that run with even colder thermostats from the factory? This low temperature thermostat, featuring a calibrated, German-made 160f thermostat pre-installed in a new, oe wahler thermostat housing and gasket, is calibrated to allow thermostat opening a full 20-25f degrees earlier than the factory thermostat. That means that the the low temperature thermostat is designed to be fully open by 180-185f, allowing for full flow to the cooling system to maximize c...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 911 1998-05 911 2005-08 CAYMAN 2006-08
* race proven performance
* authoritative sound
* polished stainless steel 4301/304
Most stock catalytic converters have upwards of 400 cells per square inch in the metal substrate honeycomb matrix used to remove pollutants. This tight cell density can restrict exhaust efficiency. Dansk hi-flow racing converters use only 100 cells per square inch, decreasing back pressure and increasing horsepower. Gaskets and hardware sold separate.
General Fitment BOXSTER 1997-04
$2,363.12
Make a selection
Product details:
High-flowing, direct bolt-on replacement for the bulky & restrictive factory catalytic converters, gaskets included.
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-constructed from high quality mandrel bent t304 stainless steel
-less back pressure and improved throttle response
-high flow sport race cat for maximum flow and power
-includes integrated o2 sensor bung for fuel-injected cars
-direct replacement bolt-on for stock cat or cat bypass pipe
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note: fabspeed’s 200-cell high-flow catalytic...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
From $624.75
Make a selection
Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addi...(choose a part on the right to read more)
General Fitment 911 1978-83 930 1975-77 911 1974-77 911 1984-86 911 1987-89
$7,236.08
Make a selection
Description
This high-efficiency long-neck sport intercooler increases the 930's cooling, airflow and performance across the rpm range. Long-neck term refers to an intercooler outlet tube connecting directly to the throttle body. The long-neck style intercoolers delete the original equipment air by-pass valve system (also known as the shuttle valve).
Features:
Replaces both the factory intercooler and boost by-pass housing.
Motorsport-quality tig welded aluminum-alloy cores.
Significantly reduced intake charge air temperatures and increased airflow.
Built and tested for factory-like fitment.
Triple supports provide secure mounting and sealing.
Each unit is flushed, pressure tested and certified to en...(choose a part on the right to read more)
General Fitment 911 1978-83 911 1984-86 911 1987-89
$3,093.09
Make a selection
Brombacher 986/s (TUV) stainless steel sport muffler
Facts:
- + 8 crank hp & + 10 crank torque
- 2 1/4" tubing (55 mm) straight through design for max. Power
- weighs 23 lbs. (10,4 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle while remaining within the db limits of the TUV.
- no dme programming necessary.
- ask for the mounting kit FVD mk 986 001wich includes all gaskets and clambs.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparall...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,068.00
Make a selection
Product details:
Replaces factory catalytic converters with a straight-thru design for increased flow, resulting in more horsepower and improved throttle response, gaskets included.
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-adds 11 whp and significantly increases throttle response
-improved sports car sound
-constructed from 14-16 gauge, t304 c.n.c. Mandrel bent stainless steel.
-includes straight-through resonator with stainless steel wool packing
-includes o2 sensor bung so the fuel injection system can automatically adjust mixture/idle/part throttle for maximum performance.
-simple diy bolt on instal...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1987-89 911 1984-86
Product details:
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design
Features:
-fits all Porsche 911 Carrera vehicles 1976-1989
-very aggressive muffler bypass system which incorporates two resonators. Recommended for track use only!
-dramatic weight savings and improvement in power
-single outlet design
-very aggressive muffler bypass system which incorporates two resonators
-direct replacement for the OEM muffler and will bolt to the factory catalytic converter
-complete t304l stainless steel construction; 14-16 gauge cnc mandrel-be...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
$1,044.75
Make a selection
Air hose/pipe from intake boot between air flow meter and throttle body.
View/Change Diagram
From $327.60
Make a selection
Product details:
High-performance turbo discharge pipe replaces the failure-prone factory pipe that often collapses and restricts exhaust flow.
Features:
-fits all Porsche 944 turbo 951 vehicles (1985-1991)
-replacement high-performance turbo discharge pipe - replaces failure prone restrictive double walled factory OEM pipe that can collapse and restrict flow
-2.75” 70 mm t304l stainless steel - versus much smaller OEM double walled tube
-precision machined flanges and tig welded construction
-gaskets and hardware included
-polished stainless steel finish
-simple bolt-on installation
-all fabspeed performa...(choose a part on the right to read more)
General Fitment 944 1985-88 944 1989-91
Product details:
Increase exhaust flow from the headers to the mufflers and improving power and sound by replacing the catalytic converters with straight-through pipes
Features:
-fits all Porsche 944 turbo 951 vehicles (1985-1991)
-increases horsepower and torque by 26 whp and 29 ft-lbs
-constructed from cnc mandrel-bent t304l stainless steel
-direct replacement for the factory catalytic converters
-bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 944 1985-88 944 1989-91
Plug n play mass air flow system
No engine modifications, easy instalation.
Power increase up to 14 kw (20 ps).
Kit includes: air flow meter, tuning chip, air temperaturesensor, sport-airfilter, sport catalytic.
A new motronic must be ordered for models before 1986.
Requires 98 octane in europe
Requires 93 octane in the u.s.
Technical note:
For models until 1986 the dme (911-618-111-00 to 911-618-111-11) needs to be replaced. Only dme from 1986 and up (911-618-111-12 to 911-618-111-20) work with the lb1 kit.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1984-86 911 1987-89
$2,963.73
Make a selection
Product details:
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
-fits all 986 Boxster / s vehicles (1997-2004), slight modifications to the factory coolant line are required on vehicles equipped with a tiptronic transmission.
-includes 200-cell hjs sport catalytic converters for maximum performance
-adds 8 whp and 4 ft-lbs of torque when installed with fabspeed’s maxflo performance exhaust system
-equal length cnc mandrel-bent primary tubes and f1-style high velocity merge collectors ensure maximum flow characteristics
-simple ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $3,039.75
Make a selection
Plug n play mass air flow system
No engine modifications, easy instalation.
Power increase up to 14 kw (20 ps).
Kit includes: air flow meter, tuning chip, air temperaturesensor, modified airbox, K&N airfilter, sport catalytic.
Requires 98 octane in europe
Requires 93 octane in the u.s.
A new motronic must be ordered for models before 1986.
Technical note:
For models until 1986 the dme (911-618-111-00 to 911-618-111-11) needs to be replaced. Only dme from 1986 and up (911-618-111-12 to 911-618-111-20) work with the lb1 kit.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shippi...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1987-89
$3,445.37
Make a selection
Product details:
Replaces the restrictive factory cats with high-performance hjs racing sport cats for maximum performance and sound
Features:
-fits all Porsche 986 Boxster / s vehicles from (1997-1999)
-improves power and throttle response
-saves weight from the vehicle versus factory restrictive cats
-constructed with fabspeed-proprietary 200-cell hjs high-flowing catalytic converters using t304l stainless steel
-direct replacement for stock cats
-simple bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note: fabspeed’s 200-cell high-flow catalytic converters are not c.a.r.b....(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $1,464.75
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,474.47
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,140.68
Make a selection
Complete carburetion kits !
Complete kits include pre-jetted and sized carburetors, manifolds, linkage, K&N watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.
The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger ma...(choose a part on the right to read more)
General Fitment 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$10,881.84
Make a selection
Product details:
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
-fits all 911 turbo 930 vehicles (1976-1989)
-improves power delivery much sooner in the rpm range compared tot he restrictive OEM heat exchangers
-constructed from 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel with high velocity 3-in-1 pyramidal investment cast merge collector for improved exhaust scavenging.
-this system will include a drip accumulator with double swivels and aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator.
-7/8” ...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,293.06
Make a selection
Bolt one of these bad boys on and feel your car go like never before. The extra ram air flow drops the intake air temp down by adding air flow over the intercooler and increasing the horsepower.
This product has a 6-8 week lead time.
General Fitment 924 1976-79 924 1980-85 924 1986-88
Cool, high velocity air is pulled through the 360 degree breathing velocity cone air cleaner element. By passing more air into the engine, it is able to produce more horsepower. The engine also produces a well defined throttle sound. The bulky stock air box, some weighing as much as eight pounds, can now rest in your garage! There are thousands of these air cleaner systems on dozens of vehicle types in use world wide! Cooler inlet air temperature; increased cfm air flow; available with adapter ducts made from steel and heavy duty cast aluminum internal velocity cone; deep throttle sound; up to eight horsepower gain; permanent, reusable element.
General Fitment 944 1982-85 944 1985-88 944 1989-91
The techno torque air splitter allows better and faster airflow into the plenums.
General Fitment BOXSTER 1997-04
Multi port injector includes fuel hose fuel injector
smp advanced flow matched injectors promote smooth engine operation and balanced fuel delivery reducing overall fuel consumption and harmful emissions
stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
high-temp viton o-rings enable prolonged sealing of injector under extreme heat conditions
fiber optic yttrium aluminum garnet "yag" laser welding and 100 million cycle testing ensure quality in every box
View/Change Diagram
From $104.88
Make a selection
This is another one of those small sealing washers to insure that all of the cooling air is flowing over the engine and not out the open holes! order all of the other sealing washers at the same time like the spark plugs and the oil pressure switch grommet.
View/Change Diagram
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|