PORSCHE 987 STAINLESS STEEL RING
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
TUV version
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90mm) tips and are made for this muffler. Kindly order bes 997 160 41s separately.
FVD le...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,753.06
Make a selection
"brombacher" (sound version) stainless steel mufflers
(3.6l model need end tips from 3.8l model, FVD 111 997 01 or FVD 111 997 03, larger pipe implementing equal more power).
Facts (based on 997s):
- + 10 crank hp & + 10 crank torque
- 2 1/2? (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The export sound version of our "brombacher" sport mufflers gives the 997 a more pronounced, aggressive sound compared to factory mufflers. These end-muffl...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,875.72
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $8,394.54
Make a selection
Brombacher 997.2 tt ?sport stock? Stainless steel, cat bypass for OEM muffler
Facts:
- + 21 crank hp & + 18 crank torque**
- reuses OEM muffler, perfect for those looking for more sound and power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- reduces backpressure and thermal stress
- 6 on a scale of 1-10 in volume (1 being stock).
- reuses OEM v band style connecting hardware.
- made in Germany.
- available in 100 cell or 200 cell. Please ask your sales person for pricing.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programmin is necessary.
- reuses OEM tips.
Fv...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,079.36
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $9,324.32
Make a selection
Brombacher 997.2 tt "sport stock" stainless steel, cat bypass for OEM muffler facts: - + 21 crank hp & + 18 crank torque** - reuses OEM muffler, perfect for those looking for more sound and power. - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 6 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell or 200 cell. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programmin is necessary. - reuses OEM tips. FVD i...(choose a part on the right to read more)
Brombacher 997.2 tt "cat-back" (sound version) muffler for OEM cats
Facts:
- up to 25 crank hp & + 25 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 5 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:t...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,945.25
Make a selection
FVD primary muffler bypass system for 2009- 997/997s
Fit with and without factory sport valved exhaust !
Facts (based on 997s):
- + 5 crank hp & + 4 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 5.5 lbs weight savings
- t 316 stainless steel for improved durability over t 304
- adjustable design for easy installation
- includes quick release clamps
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
- fits with or without sound switch system
- weight: 4.6kg (10.14lbs)
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,620.47
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,710.79
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,223.38
Make a selection
"brombacher" 2009- Cayman/s (TUV) stainless steel sport muffler
Facts:
- + 11 crank hp & + 10 crank torque
- 2" tubing (50 mm) straight through design for max. Power
- weighs 23 lbs. (10,4 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for ...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08 CAYMAN 2009-12 BOXSTER 2005-08 BOXSTER 2009-11
$3,401.48
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$5,218.29
Make a selection
M&m street-sport muffler system for 2009- 997.2 / 997.2s
Facts:
- + 15 crank hp & + 13 crank torque
- 2 ½” (63.5 mm) diameter tubing (reduces thermal stress)
- replaces OEM primary and secondary mufflers
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- weighs 20.94 lbs. (9.5 kg)
- 33 lb. Weight savings over factory system
- t 316 stainless steel for improved durability over t 304
- uses the spring lock race system design to dampen vibration
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust (3.6 l models will require 3.8 l tips due to diameter diff...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,793.95
Make a selection
Over the years, deposits form inside your rubber brake lines, creating a hard brake pedal and sticky calipers. The permanent cure is to install a set of our stainless brake lines. They are teflon-lined to prevent mineral build-up and braided stainless steel to reduce line flex! (sold in sets of four.) make sure you thoroughly bleed the system with some of our great ate blue brake fluid. make sure you specify your model when ordering. Excellent brake hose for racing.
General Fitment 914 1970-76 911 1965-69 911 1970-73
This super lightweight dash cover has been specifically designed to finish off that stripped out dash of your 911 race car. This one piece unit covers the entire bottom half of the dash area from the top pad down. The dash panel comes with ignition and mounting holes only, custom holes can easily be added during installation. All stainless steel hardware is included for an easy installation. Available in brushed or black powder coat finish. State finish choice when ordering. Note: dash padding, glove box and passenger side airbag must be removed for installation.
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1970-73 911 1965-69
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owner's dream. B&b's complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive.
Features:
100% t304 stainless steel
General Fitment 911 1978-83
$3,602.06
Make a selection
B&b headers w/ heat exchangers 1 3/4 inch Porsche 930 turbo 75-89
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. B&b performance exhaust offers t-304 stainless steel headers with heat exchangers (heat exchangers are what give your car interior heating) for the popular 930 turbo. These performance-enhancing headers with their long tube and all mandrel-bent design increase low rpm torque as well as overall horsepower to the rear wheels.
This product is made to order, please allow 7-10 days prior to shipment.
*contact us for special pricing.*
General Fitment 930 1975-77
$3,602.06
Make a selection
B&b exhaust muffler oval rolled tip Porsche 930 turbo 75-89
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owners dream. B&bs complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive.
Makes 12hp to the rear wheels. features a single 3 inch oval rolled edge tip. this completely stainless steel system features cnc machined billet hangers, mandrel bending, and tig welding.
1975 - 1979 requires additional wastegate pipe.
This unit is designed for off-highway racing only and ...(choose a part on the right to read more)
General Fitment 930 1975-77
$1,577.71
Make a selection
B&b exhaust muffler right side exit w/ wastegate pipe Porsche 930 turbo 75-89
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owners dream. B&bs complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive.
Makes 14hp to the rear wheels. features right side exit w/ wastegate pipe. this completely stainless steel system features cnc machined billet hangers, mandrel bending, and tig welding.
This unit is designed for off-highway racing only and should not be used on public roads.
...(choose a part on the right to read more)
General Fitment 930 1975-77
$1,722.71
Make a selection
Brombacher panamera® turbo 200 cell hjs ?hd? Tri-metal cats
- 10 crank hp & + 9 crank torque
- 2.5" tubing (63.5mm) straight through design for max. Power
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality and louder volume which enhances 4.8 l turbo Porsche® sound
- no ecu (software) programming necessary.
- absolutely no drone in the cabin.
- will work with OEM exhaust components
- made in Germany
- can be used in conjunction with our primary muffler (bes 970 030 40s) and / or our sport muffler (bes 970 050 40s) and our tips (bes 970 060 40s) for more power and sound.
These catalytic converters are perfect for those who want to run sport cats without a softwa...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
From $4,554.17
Make a selection
B&b headers Porsche Boxster 97-99
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and street development invested into...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,463.73
Make a selection
Billy boat performance exhaust continues to deliver unsurpassed quality in craftsmanship in its products, offering true hand built quality for your Porsche. This system is the reality of a turbo owner's dream. B&b's complete turbo exhaust system all but eliminates notorious 930 turbo lag making this great machine noticeably more responsive. Their exhaust kit consists of hand built t321 stainless steel headers, with or without, heat exchangers and a t304 stainless steel high performance muffler. Also included is a turbo oil accumulator, oil scavenging line and all necessary hardware, gaskets and accessories to make for a clean bolt-on installation. Billy boat performance exhaust has a deep commitment to build ...(choose a part on the right to read more)
General Fitment 930 1975-77
$4,930.35
Make a selection
"brombacher" sport muffler for 997.2 GT3 / rs (sound version)
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 28 lbs. (12.7 kg)
- replaces stock side mufflers and stock center muffler
- 36 lbs (16.3 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no interior resonance
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
For reference:
997 GT3 OEM exhaust weight
St...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$3,448.83
Make a selection
Their newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4 and Porsche 3.6l turbo. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every ...(choose a part on the right to read more)
General Fitment 911 1989-94
$4,003.73
Make a selection
Their newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every part that b&b makes, al...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,722.71
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|