398 not categorized PORSCHE 993 REAR LEDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: PANAMERA 2010-14 - Body (includes uncategorized and accessory items) FVD631404 Don't let cracked or faded lenses detract from your cars appearance. Replace them with these high-quality OEM replacements, designed to perform like the originals. The red lenses were genuine equipment on usa models, but they really clean up the rear when added in place of the amber look. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold as a set. 1 necessary per car.
$119.90
Make a selection FVD721T254 Special tool designed to support engine during removal of transmission for repair work. Mounts to rear sway bar mount points.
$324.50
Make a selection FVD803993VS0222 High quality, German made three-point replacement safety belt, designed to perform like the original. Features / specs: belt length: 300 cm (118 inches) 3 point inertia reel belt angle adjustable reel (max. Of 8 *) includes 22 cm (8.5 inch) buckle, installation hardware and caps. Din-en-iso 9001: 2000 quality standard manufactured, e-mark approved. The matching rear belt is part # FVD803993hr sold individually. 2 necessary per car.
$162.80
Make a selection FVD98661810MG Genuine: engine - 6 cylinder boxer capacity - 2480ccm compression ratio - 11,0:1 max. Power - 150kw (204hp) @ 6000rpm max. Torque - 245nm (181lbf ft) @ 4500rpm max. Speed - 240km/h max. Rpm - 6700rpm acceleration 0-100km/h - 6.9s tuning: max. Power - 158kw (215hp) @ 6000rpm max. Torque - 260nm (192lbf ft) @ 4500rpm max. Speed - 247km/h max. Rpm - 6900rpm acceleration 0-100km/h - 6.7s very important note: our tool can only flash ecu's with the Bosch # 0 261 204 605. If your ecu does not have this Bosch # then the ecu must be sent to us to be flashed in house. Please check the sticker on the outside of your ecu to determine which Bosch # you have. You can check by opening the rear trunk and pulling the carpet li...(choose a part on the right to read more)
$984.50
Make a selection FVDBS352911003 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. Kit contains: 1 qty. Oem set of rear pads (textar), part # 91135295005eq 2 qty. Oem brake warning sensors, part # 94461221105 sold as a set. 1 necessary per car.
$80.30
Make a selection FVDBS352964001 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 4 qty. Oem brake pad damping shims (28 mm piston), part # 99635208602
$206.80
Make a selection FVDBS352965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (34 mm piston), part # 96535209601 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 please note: this is for the European rs only, not for the rs america. This also fits both the 965 3.3l and 3.6l.
$174.90
Make a selection FVD51299701MM Rear diffuser for all Porsche 997.1 Carrera models. The mounting is very easy. Plug & play with 3M double tape and 2 screws on the screwing points. Not for models with the turbo | GT2 | GT3 rear bumper
$1,312.30
Make a selection FVDBSK351930003 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (zimmerman), part # 93035104703eq & 93035104803eq 1 qty. Oem set of rear pads (textar), part # 96435193903 2 qty. Oem brake warning sensors, part #94461221105 sold as a set. 1 necessary per car.
$405.90
Make a selection FVDBSK352930002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (zimmerman), part # 93035204501eq & 93035204601eq 1 qty. Oem set of rear pads (textar), part # 96435193903 sold as a set. 1 necessary per car.
$430.10
Make a selection FVDBS352993003 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total) 2 qty. Oem brake warning sensor 4 qty. Oem brake pad damping plate (for 38 mm piston) 4 qty. Oem brake pad damping plate (for 30 mm piston) please note: this kit does not contain brake discs! Sold as a kit. 1 necessary per car.
$206.80
Make a selection FVDBSK352965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (genuine), part # 96535204100 & 96535204200 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (34 mm piston), part # 96535209601 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 please note: this kit fits both the 965 3.3l and 3.6l.
$1,475.10
Make a selection FVDBSK352970002 Set contents: - brake discs rear left and right - brake pad set - screws for caliper - warning contacts
$414.70
Make a selection FVDBSK352993002 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (zimmermann) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 8 qty. Oem brake pad damping plates (for 28 mm piston) sold as a set. 1 necessary per car.
$552.20
Make a selection FVDCHR21052117B Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection FVDCHR21052117P Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$7,772.60
Make a selection HEI981001001S Heigo motorsports has been building extremely safe roll cages and roll bars for Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. Chromoly steel 1.5 inch diameter tubing, .098 wall thickness tubing. A true bolt in bar that does not require drilling or welding. Includes a harness bar which is located on the b-pillar hoop. Bars which connect to the main hoop, use a connecting joint system so that you can easily access the motor without the use of tools. Tig welded. Retains full seat adjustability. Factory seat belts or 5-6 point belts can be used. Semi-gloss black finish. The front hoop mounts to the upper bulkhead, in the OEM m...(choose a part on the right to read more)
$1,428.90
Make a selection FVDCHR21052147P Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection PLE54109900 Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Includes right and left rear quarter windows and the rear windshield. All with seals for a complete installation.
$3,056.90
Make a selection WAP0407120A Fold-out stick in the same design as the Porsche sports car vehicle key. Porsche crest on the front. Led control light on the rear. The plug direction depends on the usb port being used. It can store up to 4 gb of data and is compatible with various operating systems including the Porsche communication management system with the individual universal audio interface option. In black with chrome. Dimensions: 53.5 x 38 x 19.5 mm General FitmentACCESSORY
$64.90
Make a selection CB20801 With the latest in luxury design and its unsurpassed comfort, the all-new legacy is a seat to be reckoned with. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The normal version will fit up to a 38” waist. The wide version is 2” wider and will fit up to a 42” waist. General FitmentALL
$449.00
Make a selection CB20901 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$399.00
Make a selection CBS20902 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$479.00
Make a selection CB20801W With the latest in luxury design and its unsurpassed comfort, the all-new legacy is a seat to be reckoned with. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The normal version will fit up to a 38” waist. The wide version is 2” wider and will fit up to a 42” waist. General FitmentALL
$499.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |