This pipe connects the heat exchanger to the catalytic converter, it is a replacement for genuine part # 930 111 169 05. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. We recommend replacing the gasket, part # 93011119307 when installing this pipe. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.

This item may need to be sourced from German...(choose a part on the right to read more)

This muffler was specifically designed for a backdate to the st look. It is manufactured for mid-range and top end performance, all without drone inside the cabin. It seamlessly mates to ssi heat exchangers for added performance while keeping the cabin warm in the winter. The muffler is vastly different than the common baffle plated mufflers stuffed with packing material that are common in the aftermarket. Ours are uniquely made with double perforated sound absorption tubes based on the halbgegenstromprinzip (half counter current principle). The acoustic silencer absorption tubes are made in a trapezoidal pattern and are perforated with varying diameters, which isolate and dampen the unwanted frequencies that c...(choose a part on the right to read more)

This silicone hose supplies hot air to the heater control box, it replaces original part # 930 211 622 01. It runs from the exhaust heat exchanger to the heater control box. We recommend replacing the heater box clamp, part # 90121105122 on one end and a hose clamp part # 99951234902 on the other end. Sold individually. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Known as: hexagon nut m 8 / hexagon nut m 6 / hexagon nut m8 / hexagon nut m 3 / nut m 8 din 934-6s verz. / hexagon-head bolt m 8
Known as: hexagon nut m 8 sw 13 / hexagon nut m 8 din 934-8 verz. / hexagon nut m 8 mount engine transmission / hexagon nut m 8 for chain case / hexagon nut m 8 f 47429 15752>>

View/Change Diagram

356 1950-59 - Engine	356 1950-59 - Engine
356 1950-59 - Engine	356 1950-59 - Engine
356 1950-59 - Transmission	356 1950-59 - Transmission
356 1950-59 - Transmission	356 1950-59 - Front Axle/Steering
356 1950-59 - Front Axle/Steering	356 1950-59 - Front Axle/Steering
356 1950-59 - Brakes/Wheels	356 1950-59 - Brakes/Wheels
356 1950-59 - Pedal System/Levers	356 1950-59 - Pedal System/Levers
356 1950-59 - Body	356 1950-59 - Electrical
356 1960-65 - Engine	356 1960-65 - Engine

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a high-quality replacement for original number, 911 211 021 60 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car. Please note: the corresponding right side i...(choose a part on the right to read more)

View/Change Diagram

Boxster 2009-11 - Engine

Cayman 2009-12 - Engine

View/Change Diagram

Boxster 2009-11 - Transmission

Cayman 2009-12 - Transmission

Increase the horsepower of your 914/6 or 916 with bursch performance headers. They have been dyno, track and street tested since 1958. Bursch headers are available in a variety of diameters to suit your displacement and driving preference. Each hand made header is mandrel bent from durable 16-gauge steel and is coated with 1,200-degree high temp paint. Features: increased horsepower and torque weight savings 16 gauge steel coated in 1,200 degree high temperature paint sold as a set (left and right). 1 necessary per car. Please note: this replaces your stock heat exchangers and does not include heat. These headers do not include provisions for o2 or temperature sensors. Use of this product for purposes other tha...(choose a part on the right to read more)

Engine compartment blower to rt. Heat exchanger; 60mm x 1100 mm. Not for ca models; original tan paper/aluminum

The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car. Please note: this part number encompasses: Bosch part 0 438 140 045 for 911 SC models from 1977-80 and Bosch part 0 438 140 089 for 911 SC models from 1980-83

This item may need to be sourced from Germany an...(choose a part on the right to read more)

Engine compartment blower to rt. Heat exchanger; 60mm x 1110 mm. Not for ca models; original dark brown paper/aluminum

This kit is necessary when installing any of our racing / street exhaust systems manufactured by m&m exhaust gmbh whose part number begins with res 911 or bes 911 kit contains: - modified oil lines - straps - header / heat exchanger gaskets

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This kit is necessary when installing any of our racing / street exhaust systems manufactured by m exhaust gmbh whose part number begins with res 911 or bes 911 kit contains: - modified oil lines - straps - header / heat exchanger gaskets - additional heating hoses - air injection plug

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

98% pure zinc. This is the ultimate muffler, heat exchanger, and intake runner paint that matches the factory color, and is resistant to heat, sand, and water. Also perfect for sealing welded seams in restoration projects. Drys in 15 minutes

General Fitment

This is a genuine 997.1 GT3 Porsche motorsports cup spoiler lip. It is a cost-effective replacement for the original GT3 spoilers. It also improves front end downforce. Please be aware that it is lower than the original Porsche spoiler but is far more pliable and more curb friendly. This part is shipped in a smaller box by motorsports to conserve on shipping costs. It is manufactured in polyurethane, so it has memory. Once you receive it just lay it out in the sun for an few hours or slowly and carefully warm it up with a heat gun. Please note: all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangea...(choose a part on the right to read more)

The heat reduction for exhaust systems with thermal insulation come first in motor sport. By reducing the heat buildup under the vehicle and in the engine compartment cooler air intake temperatures are reached which leads to a noticeable performance increase. Vehicles with increased power produce also higher exhaust temperatures. Exhaust systems with thermal insulation also protected adjacent components from these temperatures. Benefits for thermal insulation: - performance improvement - increasing the efficiency of the engine - cooler air intake - reduce the heat buildup under the vehicle - reduction of fuel consumption - faster response for catalysts (shorter heat cycle) - temperature resistance more than 110...(choose a part on the right to read more)

General Fitment

Known as: air conditioner without heat exchanger with evaporator

View/Change Diagram

Boxster 2009-11 - Body

Cayman 2009-12 - Body

Known as: heat exchanger gillet

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.