Panamera models with optional air suspension utilize four sensors to control the ride height. This is accomplished via the use of a small linkage or link which connects the sensor to the suspension. As the car is raised or lowered, the link moves the sensor up or down sending a signal to the computer telling it how high the car is. When you replace the non-adjustable factory link with this adjustable design, the output of the sensor makes the computer believe that the car is higher than it is. So, the computer will lower the ride height. The simplicity of this setup is that it retains full functionality of the factory system. Be warned, all adjustable lowering links are not the same! These links are machined al...(choose a part on the right to read more)

Do your Porsche composite headlights look dull and yellow? Do you want the crystal-clear look again, but don't want to buy new and expensive headlights? The new sylvania headlight restoration kit is for you. New plastic headlight lenses have a factory applied uv coating to protect the plastic from degradation. over time, harsh uv rays and road debris penetrate the factory uv coating resulting in hazing and yellowing. this hazing is not only unsightly, it is a serious safety concern, in fact hazed lenses reduce downroad illumination by 65% and increases oncoming driver glare by scattering light upward.

Unlike other lens restoration products designed just to remove the haze and yellowing, the sylvania head...(choose a part on the right to read more)

General Fitment

Tucked away as not to be hit by road debris, the oil filter is easily removed with the proper tool and we have it! Now you can use a ratchet wrench to remove your filter cleanly and easily. New "cap" style. 14 flute end cap wrench, for the Porsche Boxster and '98-and up 911

General Fitment

Line is for vehicles without oil pressure sensor oil lines tend wear, crack and become clogged due to age, vibration, road debris and poor oil quality. Oil lines should be inspected regularly and replaced at the first signs of leaking or oil sweating from the cracks in the line. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: we highly recommend upgrading your car to the more reliable updated hydraulic chain tensioners from the 1984 + models. If your car has not been updated give our shop a call, we can give you a quote.

This item may need to be sourced ...(choose a part on the right to read more)

Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pad surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications). Ksports extreme lightweight supercomp caliper comes in differential bore configuration and feature much larger pistons than the procomp calipers. Each one is machined from aircraft quality billet, weighs just over 7lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless steel brake pad wear ...(choose a part on the right to read more)

General Fitment

Oil hoses tend wear, crack and become clogged due to age, vibration, road debris and poor oil quality. Oil hoses should be inspected regularly and replaced at the first signs of leaking or oil sweating from the cracks in the hose. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 w...(choose a part on the right to read more)

Oil hoses tend wear, crack and become clogged due to age, vibration, road debris and poor oil quality. Oil hoses should be inspected regularly and replaced at the first signs of leaking or oil sweating from the cracks in the hose. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Oil hoses tend wear, crack and become clogged due to age, vibration, road debris and poor oil quality. Oil hoses should be inspected regularly and replaced at the first signs of leaking or oil sweating from the cracks in the hose. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 w...(choose a part on the right to read more)

Oil hoses tend wear, crack and become clogged due to age, vibration, road debris and poor oil quality. Oil hoses should be inspected regularly and replaced at the first signs of leaking or oil sweating from the cracks in the hose. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Pmo parts is proud to introduce a euro style oil cooler to replace “trombone” style coolers used in most g-model cars.

The pmo parts oil cooler, delivers vastly improved cooling properties over the stock loop cooler, its heavy duty 28 tube brass core construction offers additional cooling surface to prolong the life of your air cooled engine.
The oil cooler looks oe with a durable satin black finish.

The pmo parts oil cooler is a direct replacement for the “trombone” style loop cooler used in 1974-1983 models (additional parts may be required for fitment).

1965-1973 911’s that do not have a factory installed external oil cooler can easily upgrade their engine performance and longevity with t...(choose a part on the right to read more)

Replacing your distributor cap at regular intervals is highly recommended. The cap is susceptible to carbon deposits and can also develop hair line cracks due to heat and vibration. Those cracks allow moisture and debris in which hampers ignition and can erode terminals. We recommend closely examining both caps prior to ordering and replacing both if necessary. It is also a good idea to change the rotors at the same time, part # 93060290202 and the dust covers 93060290900. Sold individually.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

European flachbau / slant nose models came with this position light. It sits just inside of the front turn signal. They suffer from cracks caused by road debris, and should be replaced as soon as a crack is noticed. Replace yours with this high-quality hella replacement. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: bulb is not included, please order part # 90063110590 separately.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is the lower strut plate that retains the spring and sits on top of the adjusting nut. We recommend that you inspect and replace if necessary with any new shock install. This plate tends to suffer from corrosion as debris collects in it with time. Sold individually. Right or left side fitment. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Perfect for protecting the rear luggage compartment of your Boxster against dirt and debris. High-density polymer luggage compartment liner is tough, waterproof and washable. Cleverly equipped with handles, making it suitable for transportation cargo to and from your Boxster. Suitable for 987 Boxster models up to 7/06.

General Fitment

Perfect for protecting the rear luggage compartment of your Boxster against dirt and debris. High-density polymer luggage compartment liner is tough, waterproof and washable. Cleverly equipped with handles, making it suitable for transportation cargo to and from your Boxster.

Suitable for 987 Boxster models from 8/06.

General Fitment

The radiator is a critical engine component that needs to be inspected and cleaned of debris to keep them functioning efficiently. If damage is noticed, replace it with this hello OEM high-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We recommend replacing the upper and lower rubber mounts, part # 99110653701 and 99110653802 sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment. This part is the latest supersession and can also be used in place of part number 991 106 138 01.

This item may need to be sourced from ge...(choose a part on the right to read more)

Condensers release heat from the a/c system, by transforming gas into liquid to absorb heat. Condensers can suffer from internal clogging, seams leaking or can be plugged or damaged by road debris. Be sure to replace as needed to keep the hvac system operating perfectly, especially after a compressor failure. When replacing the condenser, we also recommend replacing o-rings, part # 99970755741 this is a high-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. Left or right-side fitment. 2 necessary per car. Please note: need a part that is not listed on our site? Si...(choose a part on the right to read more)

This cap fits the caliper brake bleeder valve. It keeps the valve free of dirt and debris. Sold individually. 1 necessary per caliper.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1984-86 - Brakes/Wheels	911 1984-86 - Brakes/Wheels
911 1987-89 - Brakes/Wheels	911 1987-89 - Brakes/Wheels
911 1987-89 - Brakes/Wheels	928 1983-86 - Brakes/Wheels
928 1983-86 - Brakes/Wheels	928 1987-91 - Transmission
928 1987-91 - Transmission	928 1987-91 - Brakes/Wheels
928 1987-91 - Brakes/Wheels	928 1992-95 - Transmission
928 1992-95 - Transmission	928 1992-95 - Brakes/Wheels
928 1992-95 - Brakes/Wheels	944 1985-88 - Brakes/Wheels
944 1985-88 - Brakes/Wheels	944 1989-91 - Brakes/Wheels

Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pad surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications). Ksports extreme lightweight supercomp caliper comes in differential bore configuration and feature much larger pistons than the procomp calipers. Each one is machined from aircraft quality billet, weighs just over 7lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless steel brake pad wear ...(choose a part on the right to read more)

General Fitment

Condensers release heat from the a/c system, by transforming gas into liquid to absorb heat. Condensers can suffer from internal clogging, seams leaking or can be plugged or damaged by road debris. Be sure to replace as needed to keep the hvac system operating perfectly, especially after a compressor failure. When replacing the condenser, we also recommend replacing the auxiliary condenser fan, part # 96462403501 sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Ksport procomp front big brake kit 15 in. Rotor 8 piston caliper Porsche Cayman 06-08

Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).

Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature se...(choose a part on the right to read more)

General Fitment

Ksport procomp front big brake kit 16 in. Rotor 8 piston caliper Porsche Cayman 06-08

Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).

Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seal...(choose a part on the right to read more)

General Fitment

High density polymer luggage compartment liners are tough, waterproof and washable - perfect for protecting your luggage compartments against dirt and debris. Fits 987 Boxster/Cayman and 997.

General Fitment

Perfect for protecting the front luggage compartment of your Porsche against dirt and debris. High-density polymer luggage compartment liner is tough, waterproof and washable. Cleverly equipped with handles, making it suitable for transportation cargo to and from your car.



Suitable for Boxster (987), Cayman, and 911(997) models with two-wheel drive only.

General Fitment

The bilstein b16 (pss10) suspension kit is the ultimate race inspired suspension system, delivering unsurpassed driving performance in any situation. This suspension kit puts you in complete control, providing the kind of precise suspension tuning formerly available only on race cars. From a weekend of competition to daily driving, this system provides perfect handling performance for every situation. The manually adjustable damping mono-tube gas shock absorbers feature 10-stage precise compression and rebound settings, from comfort to competition. The bilstein b16 (pss10) suspension kit utilizes debris resistant round threads on these dampers to ensure spring adjustment remains effortless throughout the life o...(choose a part on the right to read more)