Vehicles
Sections
324 not categorized PORSCHE 924S ROL L BARCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: CAYENNE 2007-10 (includes uncategorized and accessory items) HEI993001009A Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar only weighs 22 lbs (10 kg) aluminum 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Aluminum finish. Primarily for street use as a harness bar is not an option. Please note: these bars are hand made to order. ...(choose a part on the right to read more)
$1,900.80
Make a selection HEI997003001S
$2,127.71
Make a selection FVD205996003VAG These bushings are made for h&r front sway bars with 25 mm diameters. They are a direct replacement for our part # . These will also work on any bar with a 25-mm diameter. If you would also like to replace the rear, please use part # FVD205996003hag sold as a front set. 1 set needed per car.
$62.96
Make a selection KEV53100504
$4,643.89
Make a selection KEV53100602 For factory cars.
$3,979.80
Make a selection 150PB00619 Replace worn-out original stabilizer bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. Sold individually. 2 necessary per car. Please note: this fits 911 models from 1965-73 if fitted with 19 mm original stabilizer bars. It also fits the 1975-77 930 turbo model if fitted with 19 mm original stabilizer bars.
$61.78
Make a selection WCD851852B Timeless design with the look of a 3 piece and the appeal of a cast monoblock. This wheel has a painted cast center with a spun aluminum polished outer barrel. The barrel is a deep dish stepped look. It accepts the original Porsche center cap.
$508.46
Make a selection GR1019 If you are doing sheet metal repair to your Porsche (or any car, for that matter), wurth seam sealer is a must-have. It is used to seals seams & joints that are spot welded, riveted, or bolted. permanent adhesion to bare or painted surfaces. Brush able, low odor formula goes on thick to seal completely, and provides an OEM appearance when finished. Will not sag, shrink, or crack, and is paint-ready in 45 minutes. Temperature range from -13ºf to +176ºf. General FitmentACCESSORY
$63.18
Make a selection VRT958TT The Porsche Cayenne turbo 958 chassis is a monster suv with its v8 twin turbocharged engine. There is no question on the performance output that can be had. Like all other Porsche turbos, the Cayenne is no different with the power increase and driveability performance that can be had. As we have seen on other Porsche turbo vehicles, we can gain anywhere from 80-115hp reliable with just a flash. Improving the vehicles throttle response, reducing the turbo lag, and improving the pull throughout the rpm range is all part of enhancing the vehicle with an ecu tune. The Cayenne turbo engine is shared with the panamera turbo which we have had the chance to tune up. We spent countless hours testing different tuning map...(choose a part on the right to read more) General FitmentCAYENNE 2007-10
$2,916.00
Make a selection GR1004 This is the perfect interior product. Will not build-up and creates an anti static barrier to repel dirt and dust. Safe for all plastic and vinyl, inside and out. Non-silicone. General FitmentACCESSORY
$19.60
Make a selection HEI914002001S We deliver with dmsb-ons certificate. For competition motorsports you will need these options: 600044 every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated.
$2,835.76
Make a selection WCD951852B Timeless design with the look of a 3 piece and the appeal of a cast monoblock. This wheel has a painted cast center with a spun aluminum polished outer barrel. The barrel is a deep dish stepped look. It accepts the original Porsche center cap.
$555.98
Make a selection FVD72147951 The engine leakage tester drv 05 detects engine defects quickly. Inlet valve or outlet valve defects,piston/pistonrings defects,cylinder head gasket defects . Pressure of compressed air between 6 and 12 bar ! Made in Germany (hazet)
$523.91
Make a selection FVD721883081 High quality, German made brake bleeder and vacuum pump kit. Ideal for use on brakes, clutches, hvac, bleeding the fuel system or testing vacuum on a turbocharged system. Vacuum can be tested up to 0.9 bar and pressure up to 4 bar. The kit is complete with a variety of hose ends for various connections. Sold individually. General FitmentACCESSORY
From $266.11
Make a selection KEV53100601 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. ** does not include the inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric...(choose a part on the right to read more)
$3,548.56
Make a selection 914512913K Includes:
$77.76
Make a selection FVD364121845ALT Die neue felge von oz racing fur die strasse in 18 zoll. - gewicht 9,9 kg - farbe star silber hervorragend geeignet fur die strasse und den motorsport. Folgende farben sind gegen einen aufpreis lieferbar: schwarz matt, graphit matt, blau matt, orange, rot matt, weiss, race gold. Der farbaufschlag betragt 55 euro pro felge.
$826.85
Make a selection FVD545911001 - grun getont fur fahrzeuge ohne zierrahmen - ohne loch fur heckwischer - ohne heizung (keine storenden heizdrahte) - original dichtung verwendbar - ca. 10% leichter als das original (gewicht ca. 6,0 kg)
$963.37
Make a selection FVD116940 Anderungen der performance-kupplungsscheibe gegenuber der serien-kupplungsscheibe: der torsionsdampfer hat ein hoheres anschlagmoment: maximale belastbarkeit der torsionsdampfereinheit vor blockanschlag hoheres ubertragbares drehmoment anfahrverhalten ahnlich wie in serie bei fehlen der belagfeder ist das anfahrverhaltensportlicher, torsionsgefederte kupplungsscheiben dienen als schwingungsdampfer zwischen motor und getriebe.
$567.86
Make a selection FVD36203402 German made lightweight aluminum valve which is anodized in black. This valve can also work with tire pressure monitoring systems. Maximum pressure: 14 bar length: 43 mm (1.7 inches) valve hole diameter: 11.3 mm (.44 inches) weight: 12 grams made in Germany sold individually.
$11.88
Make a selection FVD205993001HA H&r rear sway bar with a 24 mm diameter. 2-way adjustable. This is the rear sway bar from our kit, part # FVD205993001. Includes bushings. Sold individually. 1 needed per car.
$433.62
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |