Vehicles
Sections
84 not categorized PORSCHE 944 BYPASSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: CAYENNE 2007-10 (includes uncategorized and accessory items) BES99116000S These tips are made specifically for our center muffler bypass (bes 991 150 00skr) . They are a dual 3.5" round design and are double walled to dissipate heat, which means that they won't tarnish as quickly as single walled tips. The design fits the factory cut outs in the bumper perfectly and is mounted via the "aero-quip" ball style-connecting joints so they can be perfectly adjusted and centered.
$1,530.14
Make a selection BES99107060S The perfect addition for an aggressive exhaust note with the added benefit of reduced weight. Features: 2 1/2 (63.5mm) tubing. Weighs 8.3 lbs. (3,7 kg), 10 + lbs. Savings over stock GT3 center muffler. Made of German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. Fits 991.1 and 991.2 GT3 & GT3 rs models.- reuse's factory tips. Includes all necessary clamps and mounting brackets. Made in Germany by m&m exhaust, gmbh. Intoxicating growl at idle, partial throttle and wide-open throttle. No interior resonance or drone. Ecu software is not necessary. Does not alter emissions, 50 state legal in the u.s. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany. T...(choose a part on the right to read more)
$2,498.36
Make a selection BES99715060SR
$3,970.30
Make a selection BES99729000S1 For 997-2 with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - made in Germany power: - 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm) - 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm) - with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm) tech tip: dme programming neccessary!
$3,714.88
Make a selection BES99720020S Brombacher stainless steel exhaust system for the 997-2 facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - sealing cone style connections and quick release clamps - 4 x 3.5 (90mm) round tips - made in Germany -+ 28 hp & + 20 lb.-ft torque gain with exhaust system only. - weighs 72 lbs.(33,0 kg). The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg). Figures: genuine: engine - 6 cylinder boxer capacity - 3800ccm compression ratio - 12,5:1 max. Power - 283kw (385hp) @ 6500rpm max. Torque - 420nm (310lbf ft) @ 4400rpm max. Speed - 300km/h max. Rpm - 7500rpm acceleration 0-100km/h - 4.5s level 3 tuning (includes FVD software, sport airfilter and exhaust) max. Power - ...(choose a part on the right to read more)
$6,939.11
Make a selection FSPOR957V8CB Product details: General FitmentCAYENNE 2007-10
From $858.60
Make a selection FVDMK986301 Installation made easy! Replace worn hardware and gaskets with one of our prepackaged installation kits.
$145.12
Make a selection RES96400000S1
$6,321.35
Make a selection FSPOR957TCB Product details: General FitmentCAYENNE 2007-10
From $858.60
Make a selection RES98720000SS Having to weld up cracks regularly on your current aftermarket racing exhaust? If you are looking for a racing exhaust that can handle abuse at the track, look no further. This exhaust system is manufactured by m&m exhaust, gmbh in Germany. They manufacture a multitude of Porsche motorsport and racing exhausts. Each system is designed for reliability and performance gains throughout the entire rev range. Not to mention, you directly benefit from everything m&m learns at the track, so their systems designs are never static. Also, each system is tested comprehensively for flow characteristics / rate, thermal stress, cracking, and longevity. Features: + 20 hp & + 19 tq catalytic bypass pipes weighs 55 lbs. (23 kg)...(choose a part on the right to read more)
$5,764.18
Make a selection RES99700060SGA3 Race exhaust system 997 GT3 cup (2010+ 3.8 l), stainless steel. - tube diameter 90mm after the headers all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$7,485.59
Make a selection RES99600060S Race exhaust system 996 GT3, stainless steel, cat bypass with tips facts: - + 25 crank hp & + 19 crank torque - catalytic bypass - long tube headers 50 mm diameter primary tubing / 55 mm collector. - "u torque" design tubing style muffler that expands to a 70mm (2.75") diameter. - weighs 36 lbs. (16,4 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - adjustable turn down 70mm (2.75") round tips - cone style connection design to prevent exhaust leaks - includes quick release clamps - made in Germany - dme programming necessary. FVD Brombachersoftware has been developed for this exhaust application. - can be ordered with 50,100, 200 cell cats. Please ask your FVD sales represe...(choose a part on the right to read more)
$5,568.16
Make a selection RES99720080S Race system grand am spec. 997.2 3.6l & 3.8l facts: - headers - 3 x 45mm (1.77") diameter tubing into a 1 x 70mm (2.75") collector (reduces thermal stress) - muffler - interchangeable cat bypass tube w/ 4 tube style mufflers, tubing 70mm (2.75") - weighs 36 lbs. (16,4 kg) - developed for excellent mid range torque needed out of corners - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - made in Germany - intoxicating growl at idle, partial throttle and wide open throttle - 997 3.6l & 3.8l - grand-am regulation 106db - approved for use in the grand-am continental series - dme programming necessary includes: 4 x conical springs 2 x adjustable exhaust tips w/ clamps 1 x muffler bracket...(choose a part on the right to read more)
$5,907.92
Make a selection RES99700060S401 Race exhaust system 997 GT3 4.0, stainless steel. - header diameter 55mm - tube diameter 90mm after the headers - recommended for engines 500hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$8,077.21
Make a selection RES99620010S Complete race exhaust system for 996 Carrera - up to 26kw (35 hp) more power - no side muffler - weight reduction - complete system weight only 36lbs (16.5 kg) dme programming necessary. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$4,851.79
Make a selection FVD111LAMVER Having problems with your check engine light? Want to run cat bypass pipes or a free flowing sports catalyst set up on your vehicle without having to reprogram the dme (ecu)? This adapter offsets the oxygen sensor about 1.5 inch from the gas stream. This achieves, in most cases, a sufficient measurement for the air/co ratio and increases the tolerance range between the pre and post cat oxygen sensors. In addition, the sensitivity of the oxygen sensor is also reduced allowing you to run a nearly any exhaust or catalytic set up, including bypass pipes, without the need to reprogram your ecu! Use only for the 2nd oxygen sensor (after catalytic)! General FitmentBOXSTER 1997-04911 GT3 2007-11 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1989-94 911 1987-89 911 1984-86 911 1978-83 CAYENNE 2007-10 CAYENNE 2003-06 CAYMAN 2006-08 BOXSTER 2005-08 968 1992-95 944 1982-85 944 1985-88 944 1989-91 928 1992-95 928 1987-91 928 1983-86 924 1986-88 924 1980-85 911 1994-98
$46.33
Make a selection VRT95748TS When it comes to turbo Porsche's, there is nothing else that can give you as much power and performance as the ecu flash. The Cayenne turbo s is no different than the 911. It has so much uncracked potential that the ecu flash lets out making the 2008 - 2010 Cayenne turbo s a thrill to drive. The new dfi 4.8l engine is much more equipped over the previous 4.5l. With stock 550hp at the crank, adjusting the trucks boost, fuel, and timing gives the Cayenne turbo another 50 horsepower to the crank. With a gain of almost 50ft/lbs of torque, towing your other toys is like they are not even there. Furthering the performance of the turbo truck is easily done with cat bypass pipes or a exhaust system. Because of the inc...(choose a part on the right to read more) General FitmentCAYENNE 2007-10
$1,895.40
Make a selection RES99710280S Race system grand am spec. 997 3.6l & 3.8l facts: - headers - 3 x 45mm (1.77") diameter tubing into a 1 x 70mm (2.75") collector (reduces thermal stress) - muffler - interchangeable cat bypass tube w/ 4 tube style mufflers, tubing 70mm (2.75") - weighs 36 lbs. (16,4 kg) - developed for excellent mid range torque needed out of corners - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - made in Germany - intoxicating growl at idle, partial throttle and wide open throttle - 997 3.6l & 3.8l - grand-am regulation 106db - approved for use in the grand-am continental series - no dme programming necessary includes: 4 x conical springs 2 x adjustable exhaust tips w/ clamps 1 x muffler bracke...(choose a part on the right to read more)
From $6,312.98
Make a selection BES95705040SK Brombacher 957 Cayenne® turbo ?sound version? Sport muffler with valves. General FitmentCAYENNE 2007-10
$6,148.32
Make a selection FVD99610053A Kit includes: sport motronic dme exch., sport air filter, sportmuffler TUV, k24-race turbocharger l/r genuine: engine - 6cyl. Boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 309kw (415hp) @ 6000rpm max. Torque - 560nm (413lbf ft) @ 3500-4500rpm max. Speed - 305km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.2s tuning: max. Power - 397kw (540hp) @ 7000rpm max. Torque - 760nm (561lbf ft) @ 4500rpm max. Speed - 331km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the...(choose a part on the right to read more)
$16,409.17
Make a selection FVD98061891 Genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s FVD software tuning: max. Power - 478kw (650hp) @ 8000rpm max. Torque - 640nm @ 6000rpm max. Speed - 340km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivabi...(choose a part on the right to read more)
$5,934.06
Make a selection FVD98010002 Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)
$18,394.67
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$8,394.41
Make a selection FVD99661831MG Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 265kw (360hp) @ 7200rpm max. Torque - 370nm (273lbf ft) @ 5000rpm max. Speed - 302km/h max. Rpm - 7600rpm acceleration 0-100km/h - 4.8s tuning: max. Power - 276kw (375hp) @ 7000rpm max. Torque - 390nm (288lbf ft) @ 5000rpm max. Speed - 310km/h max. Rpm - 7900rpm acceleration 0-100km/h - 4.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while re...(choose a part on the right to read more)
$1,300.86
Make a selection BES95805040S Brombacher 958 Cayenne turbo "sound version" sport muffler without valves or tips. General FitmentCAYENNE 2007-10
$2,809.62
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |