407 not categorized PORSCHE 986 CHANGECan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: BOXSTER 1997-04 - Front Axle/Steering (includes uncategorized and accessory items) 911606105JXATK The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car. Please note: this part number encompasses: Bosch part 0 438 140 045 for 911 SC models from 1977-80 and Bosch part 0 438 140 089 for 911 SC models from 1980-83
$744.70
Make a selection 11534399300600L If you are looking for added damping performance on the street, the bilstein b6 is the ideal solution. If you are running lowering springs, mo30 or mo33 springs, or stiffer springs we suggest the bilstein b8 shocks. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually.
$526.90
Make a selection 12001986K The jrz triple adjustable racing coilovers are a race proven winning design, incorporating many years of experience in gas hydraulic damper and suspension design, applied to race cars ranging from f1, indycars, and trans am. Combined with a thorough knowledge of vehicle dynamics and modern race cars, jrz triple adjustable race coilovers allow the driver to get the car tuned to their preference. General FitmentBOXSTER 1997-04
$17,091.00
Make a selection 115966 (2) model 928: parts of the suspension must be changed depending on manufacture date.
$521.40
Make a selection 90110705903 The new oil cooler for the Porsche 914-6 is based on the incredibly popular and successful csf 911/930 turbo engine oil cooler (csf #8242). Both of these oil coolers went through 2+ years of development and multiple rounds of prototypes. The csf Porsche 914-6 engine oil cooler’s world debut at rennsport reunion 2023 was met with incredible support and enthusiasm from the community. Obviously air-cooled enthusiasts know the struggles associated with the oil cooler located on the engine block of the old flat six motor. With the 914-6 swaps/conversions becoming ever more popular, this new oil cooler will be a game changer for classic Porsche owners and restoration shops.
From $1,030.00
Make a selection 90121119401B Engine to heat exchanger; 60mm x 380 mm original dark brown paper/aluminum
$7.85
Make a selection 115343993008L If you are looking for a shock to combine with lowering springs or firmer springs the bilstein b8 is the ideal solution. These offer more performance than the b6 as the valving is more firm. These will pair well with h&r or eibach lowering springs, however you can also run them with euro mo30 (row) springs and mo33 springs. The product benefits at a glance: shortened high-performance shock absorbers for virtually every lowering spring set. Marked improvement in safety and sportiness with additional spring changes (lowering). Sporty feel, yet still comfortable. Offers precise handling and optimum control. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested an...(choose a part on the right to read more)
$532.40
Make a selection 99635140990 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$564.30
Make a selection 99635240690 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $330.00
Make a selection 115974 (2) model 928: parts of the suspension must be changed depending on manufacture date.
$524.70
Make a selection 00004490042 Cabriolets are not known for having great acoustics inside the passenger compartment. However, the new Porsche Boxster high performance audio system changes all that. Explicitly designed for the interior and layout of the Boxster, the system delivers outstanding performance with either the roof on or off. The specially designed amplifier delivers two channels of 160 watts each, powering 2 ohm speaker sets. Two high-quality mid-range/tweeter systems coupled with a dual bass system in the door deliver incredible sound while being elegantly integrated within the Boxster's interior. Installation requires some knowledge of stereo installation, but in general is not too complicated. Beethoven or boston, the music wi...(choose a part on the right to read more)
$4,214.03
Make a selection 115333993008 If you are looking for a shock to combine with lowering springs or firmer springs the bilstein b8 is the ideal solution. These offer more performance than the b6 as the valving is more firm. These will pair well with h&r or eibach lowering springs, however you can also run them with euro mo30 (row) springs and mo33 springs. The product benefits at a glance: shortened high-performance shock absorbers for virtually every lowering spring set. Marked improvement in safety and sportiness with additional spring changes (lowering). Sporty feel, yet still comfortable. Offers precise handling and optimum control. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested an...(choose a part on the right to read more)
$343.20
Make a selection 220110932ATK Sport throttle bodies are a great addition for those with highly modified cars. They are a great addition for those with full exhaust systems (larger diameters), maf kits, larger displacements, street or race cams, etc. The remanufacturing process includes full inspection of your throttle body to ensure proper operation after the remanufacturing process. We then disassemble and bore the original 2.4-inch (63 mm) to a 2.6-inch (66.5 mm) diameter. The entire throttle body is cleaned, degreased and the internals are polished to create more laminar flow. We then machine the shaft to accept larger butterfly's which seamlessly match the bore. All clearances are checked for precision to ensure reliability. FVD thrott...(choose a part on the right to read more)
$485.10
Make a selection 115384 If you are looking for added damping performance on the street, the bilstein b6 performance damper is the ideal solution. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually. 1 necessary per car. We recommend adding our lowering spring collars if you would like a lower ride height, our part # 115110016
$640.20
Make a selection 220110905ATK 76,4mm ! More air = more performance supplied with an exchange throttle body. Not for e-gas models 76.4 mm diameter throttle body (1.8 mm larger than stock)
$485.10
Make a selection 115385 If you are looking for added damping performance on the street, the bilstein b6 performance damper is the ideal solution. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually. 1 necessary per car. We recommend adding our lowering spring collars if you would like a lower ride height, our part # 115110016
$640.20
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |