![](https://30ed524141d0cac60ab4-d2e2d18a14257de3b9ce428cf077ee97.ssl.cf2.rackcdn.com/acban.jpg)
Vehicles
Sections
398 not categorized PORSCHE 993 REAR LEDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: BOXSTER 1997-04 - Front Axle/Steering (includes uncategorized and accessory items) ![]() FVD33394401SET Replace worn-out original spring plate bushings to return your car to its intended ride quality and performance. This is a high-quality OEM 65 shore density bushing set, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. This set is a direct replacement for the rear axle strut bushings from original part # 477 511 201 and 477 511 202 sold as a set. 1 necessary per axle.
$108.90
Make a selection FVDBSK352993004 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (original Porsche) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 8 qty. Oem brake pad damping plates (for 28 mm piston)
$984.50
Make a selection FVDCHR21052117P Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection FVDBSK352970001 Set contains: - brake discs rear left and right - brake pad set - screws for caliper - warning contacts - damping plates
$775.50
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$7,772.60
Make a selection FVDCHR21052147B Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection FVDBSK352965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (genuine), part # 96535204100 & 96535204200 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (34 mm piston), part # 96535209601 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 please note: this kit fits both the 965 3.3l and 3.6l.
$1,475.10
Make a selection FVDBSK351930002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (zimmerman), part # 93035104700 & 93035104800 1 qty. Oem set of rear pads (textar), part # 96435193903 sold as a set. 1 necessary per car.
$471.90
Make a selection STB90P2 This kit was designed to efficiently remove and install the wheel bearing and hub of spindle assemblies. Built-in self centering mechanism and incorporates a roller thrust bearing which lines up straight as an arrow during removal and reinstallation. These kits have a 20 year service history at thousands of repair shops. Every kit comes with a detailed instruction manual and does not require a hydraulic press. These kits are specific to the Porsche models listed. General Fitment911 1989-94911 1994-98 911 1974-77 911 1978-83 911 1984-86 911 1987-89 944 1985-88 944 1989-91 968 1992-95 924 1986-88 BOXSTER 1997-04
$510.47
Make a selection CB20909 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$399.00
Make a selection CB20907 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$399.00
Make a selection CB20905 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$399.00
Make a selection CB20801W With the latest in luxury design and its unsurpassed comfort, the all-new legacy is a seat to be reckoned with. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The normal version will fit up to a 38” waist. The wide version is 2” wider and will fit up to a 42” waist. General FitmentALL
$499.00
Make a selection CB90011 The sport seat is designed for the everyday driver. Its extra firm memory foam conforms to your body giving you extreme comfort along with the look of luxury. Standard features include: high density injection molded foam, orthopedic design, adjustable headrest, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The sport seat will fit up to a 38” waist. The wide version is 2” wider (base area only), and will fit up to a 44” waist. General FitmentALL
$779.00
Make a selection CBL20901 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$625.00
Make a selection CBS20902 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$479.00
Make a selection CB5537 The sport seat is designed for the everyday driver. Its extra firm memory foam conforms to your body giving you extreme comfort along with the look of luxury. Standard features include: high density injection molded foam, orthopedic design, adjustable headrest, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The sport seat will fit up to a 38” waist. The wide version is 2” wider (base area only), and will fit up to a 44” waist. General FitmentALL
$759.00
Make a selection 150TB112801 High-performance, direct replacement torsion bar set that allow you to dial in the correct spring rate for street or track use. Features: lighter weight tubular / hollow torsion bar set manufactured from aircraft grade, 4340 alloy steel heat treated for increased strength and durability powder coated to resist corrosion consistent outside diameter and rate for consistent spring rate made in the usa by sway-a-way sold as a set. 1 necessary per axle.
$515.90
Make a selection 150SPB976 Replace worn-out spring plate bushings with these longer lasting poly-graphite plastic bushings. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. This includes the inner and outer bushing for the 2-piece adjustable spring plate. Sold individually. 2 necessary per car.
$39.60
Make a selection 115973
$276.10
Make a selection 115333616B8
$535.70
Make a selection 115910996031 Bilstein b4 OEM m030 (original m030 suspension) shock absorber set (4 pieces) for cars with lowering springs or cars delivered with factory m030 sport suspension. Nothing is better than the original! The b4 m030 dampers from bilstein are the perfect shock absorber for lowered cars. Facts: - constant damping pressure under load - increased driving stability - increased durability - OEM quality - bilstein gas pressure technology - type/model m030
$1,682.59
Make a selection 115333997006000
$436.70
Make a selection 11533396800600 Tree pattern: GT
$223.30
Make a selection 22051299603
$2,528.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |