Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Brombacher exclusive covers are completely manufactured in the south of Germany in baden wurtemberg, between stuttgart and our local mountains in the southern black forest. The materials chosen is environmentally friendly production and each stich is made with care. 100% Germany quality, perfect, personalized appearance for every taste, even in the covered state a mixture of cotton and polyester nano-coated on the outside which makes it so dirt and water repellent, completely paint-friendly, with very breathable construction. Price includes: cover color selection, color selection of trim, custom embroidered logo and a matching bag with a small custom logo, in the same colors. Please let us know what model, year...(choose a part on the right to read more)

An original dealer installed factory accessory dug out of the lost warehouse! This beautiful stripe matches the Porsche positive racing stripes and recalls the 914s magical mystery tour of the ‘70's! Available in both black and white, you can now identify your 914 as one of the rare factory striped versions! Black version shown.

Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. All performance products torsion bars are guaranteed for 3 years against breakage. Note: worn torsion bar bushings will shorten the life of torsion bars. Our 3-year guarantee will remain valid only when bushings are in good condition at time of installing new torsion bars. Sold in pairs.

General Fitment

Brombacher exclusive covers are completely manufactured in the south of Germany in baden wurtemberg, between stuttgart and our local mountains in the southern black forest. The materials chosen is environmentally friendly production and each stich is made with care. 100% Germany quality, perfect, personalized appearance for every taste, even in the covered state a mixture of cotton and polyester nano-coated on the outside which makes it so dirt and water repellent, completely paint-friendly, with very breathable construction. Price includes: cover color selection, color selection of trim, custom embroidered logo and a matching bag with a small custom logo, in the same colors. Please let us know what model, year...(choose a part on the right to read more)

Brombacher exclusive covers are completely manufactured in the south of Germany in baden wurtemberg, between stuttgart and our local mountains in the southern black forest. The materials chosen is environmentally friendly production and each stich is made with care. 100% Germany quality, perfect, personalized appearance for every taste, even in the covered state a mixture of cotton and polyester nano-coated on the outside which makes it so dirt and water repellent, completely paint-friendly, with very breathable construction. Price includes: cover color selection, color selection of trim, custom embroidered logo and a matching bag with a small custom logo, in the same colors. Please let us know what model, year...(choose a part on the right to read more)

Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. One needed for entire rear suspension.

Brombacher exclusive covers are completely manufactured in the south of Germany in baden wurtemberg, between stuttgart and our local mountains in the southern black forest. The materials chosen is environmentally friendly production and each stich is made with care. 100% Germany quality, perfect, personalized appearance for every taste, even in the covered state a mixture of cotton and polyester nano-coated on the outside which makes it so dirt and water repellent, completely paint-friendly, with very breathable construction. Price includes: cover color selection, color selection of trim, custom embroidered logo and a matching bag with a small custom logo, in the same colors. Please let us know what model, year...(choose a part on the right to read more)

High quality, German made three-point replacement safety belt, designed to perform like the original. Features / specs: belt length: 300 cm (118 inches) 3 point inertia reel belt angle adjustable reel (max. Of 8 *) includes 30 cm (11.8 inch) buckle, installation hardware and caps. Din-en-iso 9001: 2000 quality standard manufactured, e-mark approved. The matching rear belt is part # FVD803993hr sold individually. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. One needed for entire rear suspension.

Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. One needed for entire rear suspension.

The moshammer stormforce evo rs rear diffuser builds upon the aggressive lines found on the stormforce evo rs front spoiler and side skirts. The rear diffuser design incorporates more dramatic contours that define and set off the exhaust tips. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the 991.2 stormforce evo rs package, the result is a confident, cohesive stance with balanced downforce thoroughly tested by moshammer. Features: increased aero efficiency reduced turbu...(choose a part on the right to read more)

The 91135608701 Porsche 911sc fuel line is located in the rear engine bay, attached to the top of the fuel accumulator. The original fuel line hose becomes brittle over time. this fuel line hose is found in lh and rh drive, Porsche 911 SC in build years 1980 through 1983. griffiths' brand fuel line has an additional outer braided sleeve overlay which is resistant to chemical degradation, uv radiation, and abrasion. Kuehl brand fuel line: rear engine bay

replaces OEM pn 91135608701 and 91135608700.
fits all 911sc's from 1980-1983.

Our construction

better than oem!
griffiths kuehl brand fuel lines uses the latest sae j30r9 hose which has a higher resistance to standard petrol fu...(choose a part on the right to read more)

For owners who invest more than money into their Porsche, peace of mind is at hand. Constructed from a fire-resistant, water repelling, and anti-static blend of silver polyester fabrics that allow moisture and condensation to evaporate. Our high-quality car cover is specifically tailored to the exact shape and dimensions of your Porsche. It is soft, light, non-abrasive, and will not stretch or shrink. The bottom edge is fully elasticized with reinforced tie-down grommets on each side and features a clear rear license window. Comes with lock, cable and matching storage duffel bag featuring the Porsche crest and logo. Specify if your car is 1995-98 including targa and 4s or 1996-97 turbo.

High quality, German made three-point replacement safety belt, designed to perform like the original. Features / specs: belt length: 300 cm (118 inches) 3 point inertia reel belt angle adjustable reel (max. Of 8 *) includes 30 cm (11.8 inch) buckle, installation hardware and caps. Din-en-iso 9001: 2000 quality standard manufactured, e-mark approved. The matching rear belt is part # FVD803993hr sold individually. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.