PORSCHE BOXSTER LED LIGHTCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 944 1989-91 - Fuel/Exhaust (includes uncategorized and accessory items) 99663114380 Please note: this is for cup / r models up to 2001. They have the cut out for the clear headlight corner trim. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$335.50
Make a selection 99363103200 Complete halogen headlight that includes a lens, gasket, h1 bulb, electric motor for headlight levelling, end cap, retaining bar and connector housing. It is complete and ready for installation. Sold individually. 1 necessary per car.
From $1,241.90
Make a selection 99351232100EQ Made for the cabriolet deck lid and cars with the m602 raised stop light decklids. We have these manufactured in Germany by an OEM supplier. It is 20% stronger than the original so it will last longer. When installing we recommend purchasing 4 clips, part # n0126452, a spare or two may be beneficial as they are easy to lose. Sold individually. 2 necessary per car.
$30.80
Make a selection 94463190500 European flachbau / slant nose models came with this position light. It sits just inside of the front turn signal. They suffer from cracks caused by road debris, and should be replaced as soon as a crack is noticed. Replace yours with this high-quality hella replacement. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: bulb is not included, please order part # 90063110590 separately.
From $12.44
Make a selection 93050503200EQ Don't let a worn, faded, wax covered bumper guard detract from your cars exterior. This is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We recommend adding a new license plate light, part # 91163162004 to complete the update. Sold individually. 1 necessary per car.
$179.30
Make a selection 91163120603SCHR Fog lights are prone to stone chips and cracks. Inspect and replace them before they allow moisture in. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car.
$299.20
Make a selection 91163194900EQ As our classics age tail lights tend to suffer from oxidation, scratches, chipping and cracking. Replacing a tail light can take years off your car and is a must for a restoration. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
$104.50
Make a selection 91163196300EQ Fog lights are prone to stone chips and cracks. Inspect and replace them before they allow moisture in. Quality aftermarket replacement designed to perform like the original. Sold individually. Drivers or passenger's side fitment. 2 necessary per car.
$36.30
Make a selection 91163195000EQ As our classics age tail lights tend to suffer from oxidation, scratches, chipping and cracking. Replacing a tail light can take years off your car and is a must for a restoration. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
$104.50
Make a selection 91163192700EQ High-quality automotive lighting (al) OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Lenses are prone to oxidation and stone chips with time, they become unsightly and can detract from safety. We also recommend installing the new lens with a new gasket, part # 91163196700. Sold individually. Driver's or passenger's side fitment. 2 necessary per car.
$52.80
Make a selection 91163111302EQ This headlight is a quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Sold individually. Driver's or passenger's side fitment. 2 necessary per car.
$354.20
Make a selection 100732101 High quality, German made reproductions of the factory rennsport mirrors. Made of ultra-light polished look carbon. The glass can be adjusted.
$2,013.00
Make a selection 24135291101RS Redstuff brake pads offer significant reduction in stopping distances compared to oe pads. They also reduce annoying brake dust by 60-90%. Plus, the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fiber particles like other pads. The material used in these pads is a kevlar fiber-based brake compound enhanced with ceramic particles. It lasts longer, brakes better and is considerably quieter than OEM or other aftermarket pads. Redstuff pads contain a brake-in coating that accelerates the bed in period. This is a truly impressive high-performance pad for modified European cars, even under repeated heavy braking. Highlights: made for up to 750*c (1,382*f) for street, so...(choose a part on the right to read more)
$171.60
Make a selection 24135191101RS Highlights: made for up to 750*c (1,382*f) fsome track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from...(choose a part on the right to read more)
$169.40
Make a selection 240911352HBH Pagid light blue rsh29e are from the rsh line of historic racing brake pads. They are a medium to high friction coefficient racing compound that requires less pedal effort during racing. Rsh29e pads provide constant friction levels over a wide range of operating temperatures. They offer lower disc wear rates and long pad life. Applications include: historic endurance racing, historic GT racing and historic touring car racing. Features at a glance: medium to high friction coefficient very good thermal stability low pedal effort slightly progressive in-stop behavior and good modulation long pad and disc life pagid is one of the leading manufacturers of racing brake pads and is successful at the world's most dema...(choose a part on the right to read more)
$299.20
Make a selection 91150301502EQ Headlight buckets are infamous for rusting out as often drain plugs are clogged and trap the water. Replace yours with this dansk made product. Dansk offers a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$167.20
Make a selection 330930103R02 If you are looking to replace a damaged strosek kit or update your car with a strosek kit, we have it. This is made with lightweight gfk / grp (glass fiber komposite / glass reinforced plastic). Sold as a set. 1 needed per car. Please note: this does not include door sills. Ohne turleisten
$726.00
Make a selection 24135296401BS Highlights: superb daily driver, OEM replacement, r90 type approved pad. Features red "brake in" surface coating for instant safe braking after install. New 100 % eco friendly material with zero sulphides. No shims for noise reduction needed. More bite from cold. Works in hot and dry climates as well as in cold. Fully r 90 approved. If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad? The blackstuff brake pad is a total non metallic pad containing zero steel fiber, maki...(choose a part on the right to read more)
$123.20
Make a selection 220110981001 FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. But in order to capitalize on all the performance gains the ipd competition plenum can deliver, you must strike a balance with exhaust components and software. You cannot simply add the ipd competition plenum on the 981 series and expect large gains. But, no need to worry, the FVD ...(choose a part on the right to read more)
$1,479.50
Make a selection FVD123042ATK FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
$2,854.50
Make a selection FVD123047 FVD Brombacher997.2 tt "700 series" upgraded turbos facts: - modified compressor housing for the 3.8 l displacement - modified & lightened billet compressor wheel with 12 blades - 49.55 mm inducer - 68 mm exducer - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already running FVD software we start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power), and aids i...(choose a part on the right to read more)
$6,413.00
Make a selection FVD123041ATK FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
$2,854.50
Make a selection 24135199601YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$363.00
Make a selection 24135199601RS Highlights: made for up to 900*c (1,650*f), for race cars but street legal! High friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a ...(choose a part on the right to read more)
$300.30
Make a selection 24135199702RS Highlights: made for up to 750*c (1,382*f) some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from ...(choose a part on the right to read more)
$299.20
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |