Trying to adjust the inner rear caliper brake pad and cannot reach the adjuster through the swing arm? We have the solution! This super long 4 mm allen wrench with built in 3/8 inch drive socket accesses both the cap and adjuster and gives plenty of clearance for your ratchet. For 356, 911, 912, 914, 924, 928, 944, 968, and Boxster.

Gearwrench 3/8" drive long ball hex bit socket - 4mm

General Fitment

Known as: floating calliper

View/Change Diagram

924 1976-79 - Brakes/Wheels	924 1980-85 - Brakes/Wheels
924 1986-88 - Brakes/Wheels	944 1982-85 - Brakes/Wheels
944 1985-88 - Brakes/Wheels	944 1989-91 - Brakes/Wheels

Includes:
(1) chrome lock housing
(1) chrome lock cylinder barrel
(1) 914 512 193 10

All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Features
• improved two piece 996 GT3 lower control arm design
• stronger than cast motorsport cup arms
• allows proper camber adjustment
• uses GT3 shims to adjust camber & lower control arm length (sold separately)
• high-strength steel alloy spherical bearings, completely serviceable unlike the motorsports arms
• sealed monoball inner bearing
• allows easy access to inner arm hardware
• includes adjustable thrust arm bushings to adjust caster and wheelbase
• a must have for all track and race enthusiast
• each kit includes pair of 2 arms
• fits both front and rear axles
• compatible with all 996/997/987/981 models except GT4

• provides additional rear toe adjustment
• oem link is non-adjustable and eccentric bolt provides limited adjustment range, causing excessive tire wear and handling issues.
• helps maintain proper rear end suspension geometry
• each kit includes pair of 2 links

Features
• provides two eccentric mounting points
• used to adjust for increasing or decreasing wheelbase, and adjustable caster.
• a must-have for extended lower control arms (gt3 control arms or eccentric monoballs) to correct for unintended caster change
• compatible with all stock Porsche 996 and 997 lower control arms (including Porsche motorsport cup arms)
• complete set of 4 (2 front & 2 rear)

Embossed rear GT spoiler with Porsche on it, easily installed and painted, this one really works to give you down force at high speeds

Features
• connects the lower control arm to the subframe
• provides precision caster adjustability
• spacers included for setting stock or anti-squat and anti-dive configurations
• each kit includes pair of 2 links
• fits rear axle

Pagid yellow rsl 29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl 29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a...(choose a part on the right to read more)

This is a perfect gift or great to have for your collection! It is colorful red, white & blue, very detailed because you can see on one side the front of a racing Porsche 911 GT3 rs and on the other side the rear of the car. It is also very unique because of the picture from a Porsche inside the cup.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Power slot rear left cryogenic slotted rotors Porsche 964 Carrera 2 2s 90-94

Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.

What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race trac...(choose a part on the right to read more)

General Fitment

The bbi autosport Porsche 996 & 997 streetcup roll bar features a 2-piece design and 4130 chrome moly steel tubing (1.5" x .120" main hoop & 1.5" x 0.95" rear hoops) for excellent strength to weight ratio. Taking a sensible design approach, the 2-piece construction allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory bose subwoofers. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes "x" braces on both front and rear sections and each joint has been meticulously tig welded by hand. Bolt-in installation is accomplished by usin...(choose a part on the right to read more)

Originally published by floyd clymer this is a faithful reproduction of the 1967 publication of that manual. Includes complete technical data, service and maintenance information and comprehensive detailed instructions for the repair and overhaul of all major and minor mechanical and electrical components. Covers the Porsche 356-356a-356b-356c series from 1948 through 1965, making it an invaluable resource for collectors and restorers of these classic automobiles. There are separate sections that deal with the repair and overhaul procedures for the engine, ignition system, fuel system, clutch, transmission, rear suspension, steering, front suspension, brakes, shocks, heater and exhaust plus a detailed electrica...(choose a part on the right to read more)

General Fitment

Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 9.7 lbs. (4.4 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: this only fits in conjunction with widebody / rsr rear fenders, part # FVD503930001 . Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must proper...(choose a part on the right to read more)

Smooth-fitting indoor car cover featuring full-color Porsche logo. Designed for use out of the weather, as indoor protection from dust and dirt. Made from a breathable, antistatic material, features full-color Porsche logo.

Suitable for 911 turbo (996). Also suitable for 911 (996) models with aerokit/rear spoiler.

General Fitment

Now you can enjoy the kind of precise suspension tuning formerly available only on race cars. The pss 9 suspension kit provides the ultimate in performance tuning. The fully adjustable monotube gas shock absorbers offer a selection of nine precise compression and rebound settings, from comfort to competition. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Handling and control are just a few twists away. *** these pss9's are for models without Porsche active suspension management***

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. ...(choose a part on the right to read more)

Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (original Porsche) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 8 qty. Oem brake pad damping plates (for 28 mm piston)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This 9 inch front and 11 inch rear steel fender flare set is made in Germany, we offer a complete line of replacement bodywork to complement the entire Porsche model range. Sold individually. 1 necessary per car. Please note: for conversions, these flares will allow you to run 9 wide tires in the front and 11 wide in the rear. For the 964 / 965 models the torsion bar cut out must be filled. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Hawk hps rear brake pads Porsche 944 87-89

Hps - high performance street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose hawk performance_s hps braking compound. This unique ferro-carbon formula was developed for street performance using the safety and quality of aerospace and motorsports severe-duty friction technology.

the high performance street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you_ll have a highl...(choose a part on the right to read more)

General Fitment

Don't let cracked or faded lenses detract from your cars appearance. Replace them with these high-quality OEM replacements, designed to perform like the originals. The red lenses were genuine equipment on usa models, but they really clean up the rear when added in place of the amber look. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold as a set. 1 necessary per car.

This item ...(choose a part on the right to read more)