PORSCHE 356 B CARB VENTCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 944 1982-85 - Engine (includes uncategorized and accessory items)
$89.10
Make a selection BK5652 By stephan wilkinson. Wilkinson's spunky and entertaining memoir is a yarn-spinning and wise-cracking romp over the author's many occupations, hobbies, blunders and idiosyncrasies. In a quest to restore a well-used ‘83 911 ends two years and $60,000 later with a car worth far more in hard-earned experience than blue-book value. General FitmentACCESSORY
$81.00
Make a selection
$534.60
Make a selection 24135299601YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$308.88
Make a selection 24135296401YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$301.75
Make a selection 24135191101YS High efficiency performance and race brakes for track and street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on street cars. Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for street and tack driving. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider ebc redstuff. Highlights: made for up to 9...(choose a part on the right to read more)
$215.03
Make a selection 24135199702YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$400.36
Make a selection 24135291101YS High efficiency performance and race brakes for track and street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on street cars. Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for street and tack driving. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider ebc redstuff. Highlights: made for up to 9...(choose a part on the right to read more)
$220.97
Make a selection 24135199601RS Highlights: made for up to 900*c (1,650*f), for race cars but street legal! High friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a ...(choose a part on the right to read more)
$324.32
Make a selection BES99102240SHD + 15 hp & + 14 torque - 200 cell high flow, tri metal German hjs "hd" high durability matrix sports catalysts. - can be used with FVD "brombacher" mufflers. - weighs 15.5 lbs. (7.0 kg). - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - made in Germany. - intoxicating growl at idle, partial throttle and wide open throttle. The catalytic converter cores used in this system are the most advanced in the industry. They are produced by hjs in Germany and are a 200 cpsi (cell per square inch) tri-metal design. Tri-metal cats are the freest flowing and environmentally friendly aftermarket cats produced today. Tri-metal catalytic converters are rodium, platinum and iridium coated and per...(choose a part on the right to read more)
$3,556.87
Make a selection 9A160410400EQ If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle starting. Eventually, you will hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter, be sure to check the protection cap on the terminal for cracks which allows moisture in and causes pre-mature failure. High-quality denso OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$546.48
Make a selection 92857312305EQ Expansion valves regulate the flow of refrigerant. When they start to fail, they can create frost on the vents or the ac compressor, blow warm air or constantly run the ac compressor. Sold individually. 1 necessary per car. Please note: fits the 928 s 86- 92gs840083>, f92gs849563>, 964 and 993.
$62.96
Make a selection 115900991GT3 This cancellation kit is made specifically for the 991 GT3 and 981 GT4 and eliminates the Porsche active suspension management (pasm) warning light and persistent trouble codes when installing a conventional suspension kit on a car with pasm. The functioning of the of the electronic control unit remains completely intact and Porsche dynamic chassis control (pdcc) is also fully functional. Warning: if the pasm is switched off with the Porsche tester (pwis), the pdcc is also deactivated!
$700.92
Make a selection 24135199601YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$392.04
Make a selection 028129087 By now even the sheltered front blower box hose has deteriorated to the point of looking bad. Easily renewed, order the 2.25 size for the blower box connections and the 2.0" size for the side dash vents. One hose length will replace one side. The seal, often overlooked, seals the blower box to the cowl and prevents water from entering this critical area. Easily replaced with the blower box still in the car, this would also be a great time to clean the 1973-76 blower grille! One length does both sides.
$14.58
Make a selection 911606105JXATK The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car. Please note: this part number encompasses: Bosch part 0 438 140 045 for 911 SC models from 1977-80 and Bosch part 0 438 140 089 for 911 SC models from 1980-83
$804.28
Make a selection 91157392500EQ Expansion valves regulate the flow of refrigerant. When they start to fail, they can create frost on the vents or the ac compressor, blow warm air or constantly run the ac compressor. High-quality waeco OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$70.09
Make a selection 911606105HXATK The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car.
$804.28
Make a selection 911606105DXATK The warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary between 6-8 weeks. Sold individually. 1 necessary per car.
$804.28
Make a selection 91120127200EQ We suggest periodically checking your gas cap seal for fine cracks which produce fumes. If you replace the cap and the fumes persist, check the fuel filler neck, fuel lines, expansion tank and vent shut off valves. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
$15.44
Make a selection 91135508701EQ Classic Porsche flexible brake hoses can suffer from dry rot and can eventually split and leak fluid, creating a serious safety concern. This line is a high-quality replacement made by brax. It is designed to perform like the original and has the same length and threaded ends. Includes the supporting reinforcement wire like the original. Sold individually. Right or left side fitment. 2 necessary per car.
$23.76
Make a selection 91120127200EQAS We suggest periodically checking your gas cap seal for fine cracks which produce fumes. If you replace the cap and the fumes persist, check the fuel filler neck, fuel lines, expansion tank and vent shut off valves. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
$20.20
Make a selection 11590099701 Necessary for adding a manually adjustable coil over suspension kit to a car with pasm. This kit cancels the factory damper signal in order to prevent an error signal / code.
$560.74
Make a selection 1159029964WD The ohlins road & track suspension gives our customers a true racing experience, with their own cars, without losing comfort when commuting to work. Our unique dual flow valve (dfv) technology allows you to quickly change the stiffness of the shock absorber. When arriving to the racetrack, just turn the golden knob clockwise on the damper to set it in race mode this action changes all four areas in the damper; low and high speed compression and rebound damping. With ohlins road & track coil overs you will experience a car with blistering response times, improved bump absorption and a massive amount of grip to increase the safety when driving your car on the limit. The car will be easier to balance on the edge o...(choose a part on the right to read more)
$6,086.12
Make a selection 24135299702YS High efficiency performance and race brake pads for track & street use. These are a high friction pad that are very resistant to heat and are fast to bed-in. Yellowstuff has been used with great success in both race and street cars. Yellowstuff is an aramid fiber-based brake compound with high brake effect even when cold. Yellowstuff is possibly one of the first ever compounds that can be used for street or track driving. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider ebc redstuff. Features: made for up to 900*c (1,650*f). Developed for race cars but are stree...(choose a part on the right to read more)
$307.69
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |