Vehicles
Sections
440 not categorized PORSCHE 964 AM FMCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 928 1983-86 (includes uncategorized and accessory items) 91155503156LEEQ This is an original replacement driver's side door panel that comes pre-cut with window cut outs, handle cut outs and door pull cut outs. If you have speakers that you want to retain, you must cut them yourself to size. These are a perfect diy project and can be custom tailored to match your interior options. Made in Germany. Sold individually. Please note: specific vehicle fitment below. This is not an rennsport style panel. It is intended as a direct replacement for the original.
$700.92
Make a selection 911561023606EQ This is a complete cabrio top cover made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes all of the original tenax snaps / retainers in the original locations. This would replace original part # 911 561 023 60 6ha made in Germany. Sold individually. 1 necessary per car.
$1,426.79
Make a selection 911561050002FA1 We go to extra lengths to ensure that our linings are as similar to the originals as possible. Each is cut and trimmed to fit perfectly. Replaces original part # 911 561 050 002 fx made in Germany. Sold individually. 1 necessary per car. Please note: specific model fitment below.
$191.27
Make a selection 91156128300R01 Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Like new
$36.83
Make a selection 92830420910
From $124.20
Make a selection 93021123801EQ This part is sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$150.88
Make a selection 93010090104EQ High-quality victor reinz replacement gaskets, o-rings and washers to reseal your engine case (short block). Victor reinz has been supplying German auto manufacturers and Porsche for decades. They are a trusted name in gaskets and sealing products. This kit is complete with everything needed and we source this directly in Germany for an added level of quality. Sold individually. 1 set necessary per car. Please note: if you prefer the genuine crankshaft sealing ring, please order part # 99911342641 this also includes the intermediate shaft o-ring, part # 99970731540. Please check the model fitment tab to ensure accurate fitment.
$129.49
Make a selection 930105043021 This is an OEM part, sourced directly from Germany. Sold individually. 12 necessary per car.
$182.95
Make a selection 93060201501 Complete distributor without an exchange. This distributor has been completely remanufactured, which includes a full inspection, disassembly, cleaning and degreasing. We then install a toothed timing belt, 3 German made top bearings, 1 German made lower bearing and a distributor pinion pin (part # 930 602 922 00). We also install new dust caps, Bosch rotors and Bosch cap. Clearances, timing and proper operation are then checked to ensure reliability.
$2,736.62
Make a selection 930602015AX2ATK Send us your distributor and we will remanufacture it for you. A perfect option for those who have time and want to save on costs. The remanufacturing process includes full inspection, disassembly, cleaning and degreasing. We then install a toothed timing belt (part # FVD 602 964 00) and a distributor pinion pin (part # 930 602 922 00). Clearances, timing and proper operation are then checked to ensure reliability. Please note: each distributor is remanufactured in Germany, so the lead times can vary.
$544.53
Make a selection 93060290202A Worn or cracked distributor rotors can create misfires and poor starts. Replace yours with a genuine beru distributor rotor. Sold individually. 1 necessary per distributor.
$17.82
Make a selection 95011601254 Made in Germany by sachs to original specifications. Oem disc. Torsion sprung. Weighs: 4.6 lbs. (2.10 kg) discs with torsion springs function as a vibration damper between the engine and gearbox. They effectively lessen the harshness felt during re-engagement. Please note: please check the model fitment tab to ensure accurate fitment.
From $873.18
Make a selection 95030431130 This is the rs model g50.10 transmission synchronizer ring for 1st - 2nd gear. Original quality, sourced in Germany and made of steel for motorsports applications. Weighs: 0.12 lbs. (.05 kg) sold individually. Please note: be sure to check the model fitment tab to ensure correct fitment.
From $304.85
Make a selection 9645558320070EQ We source these door pulls in Germany to ensure that the material and stitching are made as closely to the originals as possible. Sold individually.
$38.67
Make a selection 96410504302EQ We suggest replacing the bolt and seal when installing this rail. Part #'s 96410517103 and 90012313130. Sold individually. 1 necessary per car.
$66.53
Make a selection 96410391522SET6 Replacement set 964 of pistons with cylinders, wrist pins and circlips. They are 644-652 grams. Please note: for the 964 c2 / c4 / widebody from 1990 + with the m64.01/02 engine codes. Sold as a set. 1 necessary per car.
$6,385.50
Make a selection 96410524609GU This fits 964 c2 / c4 and rs models with engine codes # m64.01/02/03. This is an OEM part, sourced directly from Germany. Professional installation is required. Different manufacturing tolerances require an inspection of the free clearance of all parts! If you're not sure about what parts are right for your build, be sure to ask one of our parts specialists. Sold individually. 1 necessary per car.
$1,007.42
Make a selection 96410511603EQ Sold individually. 2 necessary per car.
$368.91
Make a selection 96433102100RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$725.87
Make a selection 96410601402EQ This OEM cover sits low nearest the rear bumper. If you are removing the motor for maintenance, be sure to check and replace the engine covers / heat shields as necessary. We recommend purchasing a new seal, part # 96410622301 and plug, part # 96410623701 to complete the installation. Sold individually. 1 necessary per car.
$649.84
Make a selection 96414718703EQ Remove the power steering belt cover to inspect your toothed steering belt for wear and cracking. Belts undergo a lot of friction and wear, so replacing them periodically will prevent damage. Be sure to follow recommended service and replacement intervals set by Porsche on belts or examine the power steering pump belt at each oil change. Sold individually. 1 necessary per car.
$73.66
Make a selection 96433102200RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$725.87
Make a selection 96433106080 Our spring plates are manufactured in europe by an OEM supplier to Porsche using the finest materials (high carbon steel, 7075 t6 aluminum and 65 shore rubber - oe spec). Sold individually. Right side fitment. 1 qty. Required.
$734.40
Make a selection 96434705804SP We are committed to Porsche cars and are very happy to release an inner tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 032 00. We also suggest replacing your outer tie rods, part # 96434703200 (qty. 2 are needed) and now is also a good time to replace your worn out inner tie rod dust bellows, part # 96434719103. Please note: this is not for the ...(choose a part on the right to read more)
$212.65
Make a selection 96437502301ATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our mount is remanufactured in europe by an OEM supplier using the finest materials. It is a 65 shore rubber hardness value which is the same as the what was standard on these cars. Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$192.46
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |