PORSCHE 914 ETUCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 928 1978-82 - Transmission (includes uncategorized and accessory items) RES99715100S This muffler replaced the complete exhaust system after the headers. Only 11kg also available with 200 cell cats. Dme upgrade nessesery. Increase power up to 26kw (35ps) and 21nm all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,820.40
Make a selection RES99615260SS This muffler replaced the complete exhaust system after the headers. Fits cup headers. Also available with 200 cell cats for GT3 cup cars (res 996 152 60sc). No dme upgrade nessesery. Increase power up to 26kw (35ps) and 21nm all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $2,997.84
Make a selection RES99605100S This muffler replaces the OEM catalytic converters and the OEM side mufflers. Weighs 24.2 lbs (11kg) ecu software is nessesary with 100 cell cats increase power up to 34 hp (26kw (35 hp) and 16 lb. Ft (21nm) with software. Includes adjustable tips that can be turned down for track use. Also available with 200 cell cats. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,658.70
Make a selection 99630732400 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $339.15
Make a selection 96433102200RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection RES99605200S This muffler replaces the OEM catalytic converters and the OEM side mufflers. Weighs 24.2 lbs (11kg) ecu software is nessesary with 100 cell cats increase power up to 34 hp (26kw (35 hp) and 16 lb. Ft (21nm) with software. Includes adjustable tips that can be turned down for track use. Also available with 200 cell cats. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$3,070.10
Make a selection RES99600060SC Race exhaust system 996 GT3 cup, stainless steel, cat bypass with tips facts: - + 25 crank hp & + 19 crank torque - catalytic bypass - long tube headers 3 x 50mm (1.97") tubes into a 70mm (2.75") collector for max. Torque - does not exceed 106db - weighs 51 lbs. (24 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - cone style connection design to prevent exhaust leaks - includes aeroquip quick release clamps - made in Germany - can be ordered with race cats. Please ask your FVD sales representative for details. FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatche...(choose a part on the right to read more)
$6,350.30
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$7,772.60
Make a selection RES99625260SS This muffler replaced the complete exhaust system after the headers. Fits OEM headers. Also available with 200 cell cats for GT3 cup cars (res 996 252 60sc). No dme upgrade nessesery. Increase power up to 26kw (35ps) and 21nm all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$3,723.50
Make a selection RES99620010S Complete race exhaust system for 996 Carrera - up to 26kw (35 hp) more power - no side muffler - weight reduction - complete system weight only 36lbs (16.5 kg) dme programming necessary. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$4,492.40
Make a selection FVD34101702RAT We will send you a reconditioned control arm, kindly send back your old part, or core . The reconditioned control arm has been full inspected, disassembled, degreased and we have properly installed FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. This part is sold on an exchange basis, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and r...(choose a part on the right to read more)
$440.00
Make a selection FVD512991TT01 The moshammer rear wing spoiler lip is a bold, aggressive design that maximizes downforce. The rear spoiler lip installs seamlessly without drilling and the Porsche active rear spoiler remains fully functional. This is the perfect addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs (991.1 turbo/s) packages, the result is a confident, cohesive stance with balanced downforce. Features: aggressive design increased rear downforce improved handling simple to install and remove lightweight composite material designed and manufactured in Germany FVD Brombacherhas a tradition of ...(choose a part on the right to read more)
$1,383.80
Make a selection FVD20792400 Der aluminiumkuhler ist in schichtbauweise gefertigt und sorgt mit innenliegenden wirbelblechen fur optimale warmeabstrahlung. Olkuhler dieser bauart sind standard fur getunte motoren bis hin zur formel 1. 16 reihen, lange 330mm, anschlussabstand 250mm, netzbreite 290mm, befestigungslocherabstand 310mm, hohe 140mm.
$478.79
Make a selection FVD33150040 Replace worn-out original rear sub frame (side panel) bushings and return your car to its original ride quality with this cost effective alternative. This bushing is made in Germany. It is crafted in high carbon steel and 7075 t6 aircraft aluminum and includes a 65 shore hardness value core. This is a front and rear bushing for one sub frame. 2 are necessary per car. If you are looking for a sportier upgrade we suggest our clubsport sub frame bushing set, part # FVD33150040r. We also sell complete sub frames with the bushings installed, part # FVD331993001.
$418.00
Make a selection FVD58099100 German manufactured bolt in harness bar solution that is less obtrusive than a full roll bar. This harness bar is secured to the rear strut towers with the included high-grade fasteners. Features: seamlessly secured to the rear strut towers allows full front seat range of motion ideal for a lease or to return to the original equipment does not require trimming or cutting any interior parts discreet single belt tube airbag and belt tensioner system remain fully operational chromoly steel tig welded black finish factory seat belts or 4-5-6-point belts can be used. Cost effective for club sport use. Please note: this requires the removal of the rear seat back rests.
$764.50
Make a selection FVD50599108MM The moshammer stormforce evo rs front chin spoiler for the GTS model blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce and uplift reduction. It also incorporates twin air guides to assist with brake ventilation and underbody air flow efficiency. The moshammer stormforce evo rs front chin spoiler design offers exclusive aesthetics, aero functionality and it is secured seamlessly into the factory locations without modification. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the s...(choose a part on the right to read more)
$1,230.90
Make a selection FVD50599109MM The moshammer stormforce evo rs front chin spoiler for the c2 / c2s / c4 / c4s and the t models blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce and uplift reduction. It also incorporates twin air guides to assist with brake ventilation and underbody air flow efficiency. The moshammer stormforce evo rs front chin spoiler design offers exclusive aesthetics, aero functionality and it is secured seamlessly into the factory locations without modification. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added...(choose a part on the right to read more)
$1,237.50
Make a selection FVD50399101MM The moshammer front fender set blends just the right amount of motorsport pedigree with functionality. This aggressive design is captivating on any 991 model and offers a level of exclusivity not found with competitors body kits. The integrated fender vents lower the thermal load on the brakes by allowing the heat to be quickly ventilated up and out of the wheel arch. This composite fender set has been meticulously designed to bolt up to the factory locations for perfect panel fitment, alignment and consistent gaps. A perfect addition for a leased vehicle or for those looking to return the car to its original appearance in the future. These fenders complement the entire moshammer stormforce (991.1) / stormforce...(choose a part on the right to read more)
$3,631.10
Make a selection FVD50499101MM The moshammer side inlet set is a striking design that enhances performance and efficiency. The inlets create a ram air effect by scooping in a larger volume of air, which delivers up to 10% more air pressure into the intercoolers. These sets are available in satin black, gloss black or high gloss carbon. This is another versatile moshammer offering for a leased vehicle or for those looking to return the car to its original appearance in the future. This set complements the entire moshammer downforce rs (991.1 turbo/s) or evo rs (991.2 turbo/s) aero packages and benefits the mighty GT2 rs as well. Features: striking design increased performance added efficiency direct bolt on available in satin black, gloss bla...(choose a part on the right to read more)
$1,082.40
Make a selection FVD20794400 Der aluminiumkuhler ist in schichtbauweise gefertigt und sorgt mit innenliegenden wirbelblechen fur optimale warmeabstrahlung. Olkuhler dieser bauart sind standard fur getunte motoren bis hin zur formel 1. 16 reihen, lange 330mm, anschlussabstand 250mm, netzbreite 290mm, befestigungslocherabstand 310mm, hohe 140mm.
$438.90
Make a selection FVD34101702RAK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)
$438.90
Make a selection RES99709064SRSR This is a custom system made for a 997.1 GT3 cup with a 4.0 l conversion that has 500 hp+ - header diameter 55mm - tube diameter 76mm after the headers - recommended for engines 500 hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$5,846.50
Make a selection RES99700060SGA Race exhaust system 997 GT3 cup (2010+ 3.8 l)& rsr (2007-10) , stainless steel. - header diameter 55mm - tube diameter 76mm after the headers all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$6,153.40
Make a selection FVD34101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD33391100SET Replace worn-out original spring plate bushings to return your car to its intended ride quality and performance. This is a high-quality OEM 65 shore density bushing set, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. This set is a direct replacement for original part # 911 333 009 00 sold as a set. 1 necessary per axle.
$108.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |