PORSCHE 356 C EXHAUST CATCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 928 1978-82 - Brakes/Wheels (includes uncategorized and accessory items) BES99100260S
$7,553.30
Make a selection BES99700060S401 90mm street sport exhaust system 997 GT3 4.0, stainless steel. Noise reduced for street sport use. - header diameter 55mm - tube diameter 90mm after the headers - recommended for engines 500hp+
$6,645.67
Make a selection BES99720020S Brombacher stainless steel exhaust system for the 997-2 facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - sealing cone style connections and quick release clamps - 4 x 3.5 (90mm) round tips - made in Germany -+ 28 hp & + 20 lb.-ft torque gain with exhaust system only. - weighs 72 lbs.(33,0 kg). The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg). Figures: genuine: engine - 6 cylinder boxer capacity - 3800ccm compression ratio - 12,5:1 max. Power - 283kw (385hp) @ 6500rpm max. Torque - 420nm (310lbf ft) @ 4400rpm max. Speed - 300km/h max. Rpm - 7500rpm acceleration 0-100km/h - 4.5s level 3 tuning (includes FVD software, sport airfilter and exhaust) max. Power - ...(choose a part on the right to read more)
$6,939.11
Make a selection FVD111997GT3B
$725.87
Make a selection FVD2113284890
$5,396.57
Make a selection FVD21132848942
$5,235.87
Make a selection RES96410100S
$7,553.30
Make a selection RES99700062S1
$8,370.65
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$8,394.41
Make a selection RES99600060S Race exhaust system 996 GT3, stainless steel, cat bypass with tips facts: - + 25 crank hp & + 19 crank torque - catalytic bypass - long tube headers 50 mm diameter primary tubing / 55 mm collector. - "u torque" design tubing style muffler that expands to a 70mm (2.75") diameter. - weighs 36 lbs. (16,4 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - adjustable turn down 70mm (2.75") round tips - cone style connection design to prevent exhaust leaks - includes quick release clamps - made in Germany - dme programming necessary. FVD Brombachersoftware has been developed for this exhaust application. - can be ordered with 50,100, 200 cell cats. Please ask your FVD sales represe...(choose a part on the right to read more)
$5,568.16
Make a selection RES99600060SC Race exhaust system 996 GT3 cup, stainless steel, cat bypass with tips facts: - + 25 crank hp & + 19 crank torque - catalytic bypass - long tube headers 3 x 50mm (1.97") tubes into a 70mm (2.75") collector for max. Torque - does not exceed 106db - weighs 51 lbs. (24 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - cone style connection design to prevent exhaust leaks - includes aeroquip quick release clamps - made in Germany - can be ordered with race cats. Please ask your FVD sales representative for details. FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatche...(choose a part on the right to read more)
$7,885.94
Make a selection RES99700060S401 Race exhaust system 997 GT3 4.0, stainless steel. - header diameter 55mm - tube diameter 90mm after the headers - recommended for engines 500hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$8,077.21
Make a selection FSPOR992TVLV Treat your 992 turbo to the finest cat-back exhaust solution on the market. This valveed exhaust system is plug-and-play with the factory pse system so you can turn pse off for quiet highway cruising and turn pse on for ripping twin turbo sports car sound!
$5,665.63
Make a selection RES99700160S Please note: system is shown with thermo-isolation which is sold separately! - header diameter 55mm - tube diameter 76mm after the headers - recommended for engines 450hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$9,003.85
Make a selection RES99710060S76 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$5,943.56
Make a selection RESMK911002 This kit is necessary when installing any of our racing / street exhaust systems manufactured by m exhaust gmbh whose part number begins with res 911 or bes 911 kit contains: - modified oil lines - straps - header / heat exchanger gaskets - additional heating hoses - air injection plug
$525.07
Make a selection 21011124OK Catalytic bypass pipe "u-torque" design, manufactured by m&m in Germany. The u-torque design compensates for the backpressure loss while running without cats. The design minimizes the loss of low end torque and adds 10-15 ft-lbs of torque in the mid and top range of the rpms. Why settle for the traditional cross over cat design when you can add torque in the mid-range and minimize the loss of torque down low where the 997's need it most! Ecu software is necessary !
$1,182.06
Make a selection 90002500703 Known as: washer 8.4 / washer for ground strap 20 x 8.4 x 2 / washer a 8.4 / washer b 8.4 / washer a 6.4 / washer m 8.4 / washer a8.4 View/Change Diagram
From $0.85
Make a selection BK7033 Re-issue of autobooks manual covering engine, fuel & cooling systems, ignition, heating, exhaust emissions, clutch, transmission, rear axle, suspension, steering gear, brakes, electronics, and bodywork. This is a manual that will help keep 912 on the road. A must for any 912 owner. General FitmentACCESSORY
$34.56
Make a selection BK1007 A must have guide which describes the important, often overlooked subtle difference between Porsche models and evolution within each model range. Exhaustively researched and reported by veteran automotive journalist dean batchelor. General FitmentACCESSORY
$28.48
Make a selection BES99725060SR Brombacher sport muffler for 997.2 GT3 / rs (sound version) with rsr style tips facts: - + 10 crank hp & + 10 crank torque - 2 3/4 tubing (70mm) straight through design for max. Power - weighs 28 lbs. (12.7 kg) - replaces stock side mufflers and stock center muffler - 36 lbs (16.3 kg) savings over stock system! - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - 2 x 3.5 (90mm) rsr angle cut tips - includes all necessary clamps and mounting brackets - made in Germany - 105 db - intoxicating cup car growl at idle, partial throttle and wide open throttle - no interior resonance - no dme programming necessary, does not alter emissions, 50 state legal in the u.s. For reference: 997 GT3 OEM ...(choose a part on the right to read more)
$3,265.81
Make a selection BES99722040S81 Brombacher 997.2 tt "sport stock" stainless steel, cat bypass for OEM muffler facts: - + 21 crank hp & + 18 crank torque** - reuses OEM muffler, perfect for those looking for more sound and power. - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 6 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell or 200 cell. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programmin is necessary. - reuses OEM tips. FVD i...(choose a part on the right to read more)
$927.83
Make a selection BES99729000S1 For 997-2 with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - made in Germany power: - 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm) - 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm) - with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm) tech tip: dme programming neccessary!
$3,714.88
Make a selection 99611198200 Beautiful chrome-plated exhaust tail pipe tips made of stainless steel and featuring a larger, oval cross section for a more powerful appearance. Also fits the sport exhaust system for the final finishing touch. Priced per each.
$535.56
Make a selection BES99126010SOL Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$712.80
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |