PORSCHE 914 ETUCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 924 1986-88 - Brakes/Wheels (includes uncategorized and accessory items) HR5507 If you have room in your fender well to spacer your wheels out, here is an easy way to improve your Porsche’s handling. Made of aluminum/magnesium alloy these hard anodized spacers are hub-centric and up to 70% lighter than typical steel wheel spacers. Made in Germany. Spacers come with wheel bolts, studs and nuts. General Fitment911 1994-98911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 968 1992-95 944 1989-91 944 1985-88 944 1982-85 924 1986-88 924 1980-85 912 1965-69 928 1992-95 928 1987-91 928 1983-86 928 1978-82 356 1960-65
$225.00
Make a selection FVD561981A This is a genuine smarttop product that includes these features: simply open or close your convertible top using the original factory remote control key fob. The one-touch convertible top operation allows you to open or close the top with one touch. Turn the module off with an easy key sequence. Ideal when letting someone else drive your car. Turning the ignition on or off does not interrupt convertible top operation. One-touch and auto operation for the wind deflector can be programmed. The module can be removed any time, simple to return a leased vehicle or to sell it in original condition. One-touch operation of all windows via the driver's door switches. Custom designed plug-in-between wiring harness for e...(choose a part on the right to read more)
$416.90
Make a selection FVD20792400 Der aluminiumkuhler ist in schichtbauweise gefertigt und sorgt mit innenliegenden wirbelblechen fur optimale warmeabstrahlung. Olkuhler dieser bauart sind standard fur getunte motoren bis hin zur formel 1. 16 reihen, lange 330mm, anschlussabstand 250mm, netzbreite 290mm, befestigungslocherabstand 310mm, hohe 140mm.
$478.79
Make a selection FVD51299124MM The moshammer stormforce evo rs rear spoiler for the 991.2 model blends a bit of Porsche ducktail heritage into its design to increase rear downforce and reduce front axle uplift. The contours of this spoiler have a step effect which seamlessly blends into both rear quarter panels. When viewed at a standstill it has a subtle factory like appeal that complements the cars lines. When deployed the rake angle takes on a more aggressive appearance evoking thoughts of the much beloved ducktails. Like a majority of the moshammer offerings, this spoiler is a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looki...(choose a part on the right to read more)
$1,455.30
Make a selection HR5505 If you have room in your fender well to spacer your wheels out, here is an easy way to improve your Porsche’s handling. Made of aluminum/magnesium alloy these hard anodized spacers are hub-centric and up to 70% lighter than typical steel wheel spacers. Made in Germany. Spacers come with wheel bolts, studs and nuts. This is a special item and cannot be returned if packaging has been opened. General Fitment924 1986-88944 1989-91 944 1985-88 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 968 1992-95 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98 911 1998-05 356 1960-65 912 1965-69 BOXSTER 1997-04 BOXSTER 2005-08 911 1970-73 911 1965-69 CAYMAN 2006-08 CAYENNE 2003-06 CAYENNE 2007-10 911 2005-08
$139.95
Make a selection FVD50599109MM The moshammer stormforce evo rs front chin spoiler for the c2 / c2s / c4 / c4s and the t models blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce and uplift reduction. It also incorporates twin air guides to assist with brake ventilation and underbody air flow efficiency. The moshammer stormforce evo rs front chin spoiler design offers exclusive aesthetics, aero functionality and it is secured seamlessly into the factory locations without modification. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added...(choose a part on the right to read more)
$1,237.50
Make a selection FVD50399101MM The moshammer front fender set blends just the right amount of motorsport pedigree with functionality. This aggressive design is captivating on any 991 model and offers a level of exclusivity not found with competitors body kits. The integrated fender vents lower the thermal load on the brakes by allowing the heat to be quickly ventilated up and out of the wheel arch. This composite fender set has been meticulously designed to bolt up to the factory locations for perfect panel fitment, alignment and consistent gaps. A perfect addition for a leased vehicle or for those looking to return the car to its original appearance in the future. These fenders complement the entire moshammer stormforce (991.1) / stormforce...(choose a part on the right to read more)
$3,631.10
Make a selection FVD51154199 Prevents the hood from accidentally opening at speed and keeps the hood in place should an impact occur. These are genuine Porsche motorsports parts from Germany. Fits front hood / trunk and or the rear deck lid. Sold individually. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$92.40
Make a selection FVD34101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection 9913511068A All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$1,367.30
Make a selection FVD34101802RAK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)
$438.90
Make a selection FVD33394401SET Replace worn-out original spring plate bushings to return your car to its intended ride quality and performance. This is a high-quality OEM 65 shore density bushing set, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. This set is a direct replacement for the rear axle strut bushings from original part # 477 511 201 and 477 511 202 sold as a set. 1 necessary per axle.
$108.90
Make a selection FVD34101702ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD33391100SET Replace worn-out original spring plate bushings to return your car to its intended ride quality and performance. This is a high-quality OEM 65 shore density bushing set, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. This set is a direct replacement for original part # 911 333 009 00 sold as a set. 1 necessary per axle.
$108.90
Make a selection FVD20794400 Der aluminiumkuhler ist in schichtbauweise gefertigt und sorgt mit innenliegenden wirbelblechen fur optimale warmeabstrahlung. Olkuhler dieser bauart sind standard fur getunte motoren bis hin zur formel 1. 16 reihen, lange 330mm, anschlussabstand 250mm, netzbreite 290mm, befestigungslocherabstand 310mm, hohe 140mm.
$438.90
Make a selection HR5508 If you have room in your fender well to spacer your wheels out, here is an easy way to improve your Porsche’s handling. Made of aluminum/magnesium alloy these hard anodized spacers are hub-centric and up to 70% lighter than typical steel wheel spacers. Made in Germany. Spacers come with wheel bolts, studs and nuts. General Fitment911 1989-94911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 944 1989-91 944 1985-88 944 1982-85 924 1986-88 924 1980-85 924 1976-79 912 1965-69 911 1994-98 968 1992-95 928 1992-95 928 1987-91 928 1983-86 928 1978-82 356 1960-65
$229.50
Make a selection FVD33150040 Replace worn-out original rear sub frame (side panel) bushings and return your car to its original ride quality with this cost effective alternative. This bushing is made in Germany. It is crafted in high carbon steel and 7075 t6 aircraft aluminum and includes a 65 shore hardness value core. This is a front and rear bushing for one sub frame. 2 are necessary per car. If you are looking for a sportier upgrade we suggest our clubsport sub frame bushing set, part # FVD33150040r. We also sell complete sub frames with the bushings installed, part # FVD331993001.
$418.00
Make a selection RES99709064SRSR This is a custom system made for a 997.1 GT3 cup with a 4.0 l conversion that has 500 hp+ - header diameter 55mm - tube diameter 76mm after the headers - recommended for engines 500 hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$5,846.50
Make a selection 997352107A1 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$762.30
Make a selection 99750598390 This is a genuine 997.1 GT3 Porsche motorsports cup spoiler lip. It is a cost-effective replacement for the original GT3 spoilers. It also improves front end downforce. Please be aware that it is lower than the original Porsche spoiler but is far more pliable and more curb friendly. This part is shipped in a smaller box by motorsports to conserve on shipping costs. It is manufactured in polyurethane, so it has memory. Once you receive it just lay it out in the sun for an few hours or slowly and carefully warm it up with a heat gun. Please note: all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangea...(choose a part on the right to read more)
$239.95
Make a selection 99711013190 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$337.70
Make a selection 99660301990 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,351.80
Make a selection 99735299302EQ Is your parking brake of concern when parking on an incline? Restore peace of mind and reduce the amount of effort needed when pulling the handle. Set includes 4 shoes. 1 necessary per car. We also recommend replacing your springs and washers when replacing the shoes, parts are listed below. 4 qty. Compression springs, part # 92835295702 2 qty. Return springs, part # 90135293210 2 qty. Return springs, part # 99635272300 4 qty. Washers, part # 92835296300
$58.30
Make a selection 99635240690 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $330.00
Make a selection 9966310639A All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$225.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |