PORSCHE 993 REAR LEDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 924 1986-88 - Body (includes uncategorized and accessory items) FVD98661810MG Genuine: engine - 6 cylinder boxer capacity - 2480ccm compression ratio - 11,0:1 max. Power - 150kw (204hp) @ 6000rpm max. Torque - 245nm (181lbf ft) @ 4500rpm max. Speed - 240km/h max. Rpm - 6700rpm acceleration 0-100km/h - 6.9s tuning: max. Power - 158kw (215hp) @ 6000rpm max. Torque - 260nm (192lbf ft) @ 4500rpm max. Speed - 247km/h max. Rpm - 6900rpm acceleration 0-100km/h - 6.7s very important note: our tool can only flash ecu's with the Bosch # 0 261 204 605. If your ecu does not have this Bosch # then the ecu must be sent to us to be flashed in house. Please check the sticker on the outside of your ecu to determine which Bosch # you have. You can check by opening the rear trunk and pulling the carpet li...(choose a part on the right to read more)
$984.50
Make a selection FVD721T254 Special tool designed to support engine during removal of transmission for repair work. Mounts to rear sway bar mount points.
$324.50
Make a selection FVDBS352993003 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total) 2 qty. Oem brake warning sensor 4 qty. Oem brake pad damping plate (for 38 mm piston) 4 qty. Oem brake pad damping plate (for 30 mm piston) please note: this kit does not contain brake discs! Sold as a kit. 1 necessary per car.
$206.80
Make a selection FVDBS352964002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total), part # 96435294903 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (28 mm piston), part # 99635208602 sold as a kit. 1 necessary per car.
$137.50
Make a selection FVDBS352993002 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total) 2 qty. Oem brake warning sensor 8 qty. Oem brake pad damping plate (for 28 mm piston) please note: this kit does not contain brake discs!
$240.90
Make a selection FVD58099100 German manufactured bolt in harness bar solution that is less obtrusive than a full roll bar. This harness bar is secured to the rear strut towers with the included high-grade fasteners. Features: seamlessly secured to the rear strut towers allows full front seat range of motion ideal for a lease or to return to the original equipment does not require trimming or cutting any interior parts discreet single belt tube airbag and belt tensioner system remain fully operational chromoly steel tig welded black finish factory seat belts or 4-5-6-point belts can be used. Cost effective for club sport use. Please note: this requires the removal of the rear seat back rests.
$764.50
Make a selection FVDBSK352930002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (zimmerman), part # 93035204501eq & 93035204601eq 1 qty. Oem set of rear pads (textar), part # 96435193903 sold as a set. 1 necessary per car.
$430.10
Make a selection FVDBSK351930003 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (zimmerman), part # 93035104703eq & 93035104803eq 1 qty. Oem set of rear pads (textar), part # 96435193903 2 qty. Oem brake warning sensors, part #94461221105 sold as a set. 1 necessary per car.
$405.90
Make a selection FVDBSK352970002 Set contents: - brake discs rear left and right - brake pad set - screws for caliper - warning contacts
$414.70
Make a selection FVDBSK352993002 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (zimmermann) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 8 qty. Oem brake pad damping plates (for 28 mm piston) sold as a set. 1 necessary per car.
$552.20
Make a selection FVDBSK352993004 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (original Porsche) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 8 qty. Oem brake pad damping plates (for 28 mm piston)
$984.50
Make a selection FVDCHR21052117P Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection FVDBSK352965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (genuine), part # 96535204100 & 96535204200 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (34 mm piston), part # 96535209601 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 please note: this kit fits both the 965 3.3l and 3.6l.
$1,475.10
Make a selection PLE54109900SEGR Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Includes right and left rear quarter windows and the rear windshield. Does not include the seals.
$2,087.80
Make a selection MIT1416 Embossed rear GT spoiler with Porsche on it, easily installed and painted, this one really works to give you down force at high speeds
$269.00
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$7,772.60
Make a selection RES9970400S For use with Porsche factory cup headers or FVD header (res 997 010 62s cup s header or res 997 010 61s cup header) technical details: 106 db w/o side mufflers material: stainless steel pipe:stainless steel 2 x 76mm (3 ) for cup s stainless steel 2 x 70mm (2.75 ) for cup sound level: fia homologation, does not exceed grandam 106db spec category: racing pipe diameter: tube 76mm (3 ) or tube 70mm (2.75 ) weight silencer: 7.2kg (15.87 lbs) weight rear muffler: 7.6kg (16.76 lbs) delivery contents: 1 x center muffler cup or cup s 2 x connection tubes federation internationale de l'automobile homogolation no.: GT3-015 extensio no.: 05/01 vo group: GT3
From $3,156.04
Make a selection RES99701063S These work with the cup s rear pipes. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,900.70
Make a selection RTH002 Until now, 944 owners have been forced to fabricate their own "regulation" bumper mounted tow hook to be legal for many sanctioning racing series or other organized track events. Rennline's new 944 race tow hook has a 2" diameter opening (required) and can be easily accessed without crawling under the rear of the car, but does not protrude far enough to bruise your shins if you walk too close to the vehicle while in the paddock. Rennline's race tow hook mounts directly to the rear bumper shock using the factory bumper shock bolts and can be installed in minutes. Installation can be completed without removing your factory rear bumper or factory valance. Each tow hook is manufactured from durable steel, powd...(choose a part on the right to read more) General Fitment924 1976-79924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91
$115.50
Make a selection CB20801 With the latest in luxury design and its unsurpassed comfort, the all-new legacy is a seat to be reckoned with. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The normal version will fit up to a 38” waist. The wide version is 2” wider and will fit up to a 42” waist. General FitmentALL
$449.00
Make a selection CB20907 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$399.00
Make a selection CB20901W The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$479.00
Make a selection CB20905 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$399.00
Make a selection CB90011 The sport seat is designed for the everyday driver. Its extra firm memory foam conforms to your body giving you extreme comfort along with the look of luxury. Standard features include: high density injection molded foam, orthopedic design, adjustable headrest, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The sport seat will fit up to a 38” waist. The wide version is 2” wider (base area only), and will fit up to a 44” waist. General FitmentALL
$779.00
Make a selection CBL20901 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$625.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |