PORSCHE 944 PARTS ORDERCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 924 1986-88 - Body (includes uncategorized and accessory items) 100555216SCC Is your shift boot looking a bit worn and tattered? Replace it with one that is hand crafted in period correct, German sourced, nappa full grain leather. This boot is supple, automotive grade leather that is ideal for a perfect restoration. Be sure to check our matching handbrake boots. Please note: this does not include a shift knob. Please indicate the year, model and color code when ordering. Other colors are available upon request. Inquire with the Porsche color code, ral or pantone color code via our website or with an FVD parts specialist. Sold individually. 1 necessary per car.
$133.10
Make a selection 115000003 Support nut for our part # 115114 115115 and 115116 etc. Internal thread: 4.7cm total height of the ring: 2.2cm height of the upper part of the screw ring including the thread: 1.4cm sold individually
$38.50
Make a selection 1112P7160 Please note! Gas pedal extensions are not included! Order part # 1112 pe7071 for silver order part # 1112 pe7071red for red order part # 1112 pe7071blk for black
$247.50
Make a selection 1112P716059 Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Each pedal set comes with 8 replacement rubber grips or can be purchased separately at any time. Rennline pedal sets are constructed of anodized aircraft grade aluminum and all stainless-steel hardware. Sold as a set of 4 pedals. Please note: gas pedal heel + toe extensions are sold separately. Please enquire. Order part # 1112 pe7071 fo...(choose a part on the right to read more)
$242.00
Make a selection 115900964BI01 Bilstein b16 (pss10) suspension kits feature ride height adjustability with 10-stage manually adjustable dampers. Simply adjust compression and rebound settings, from comfort to competition, by rotating the setting number knob at the base of the shock. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Ride height is adjustable from 1.0 to -1.5 20-40mm (front) & -1.0 to -1.5 20-40mm (rear - minimum 1 lowering). Bilstein b16 (pss10) suspension allows you to enjoy the kind of precise suspension tuning formerly available only on race cars. We recommend purchasing our lowering collar kit if you plan to run the...(choose a part on the right to read more)
$3,855.50
Make a selection 170211021 This is a high-quality replacement for original number, 911 211 021 60 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car. Please note: the corresponding right side is our part # 170211022
$1,092.30
Make a selection 1002110221DA This is a high-quality replacement for original number, 911 211 022 10 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car.
$1,348.60
Make a selection 1150002LI These are made with club sport events in mind. They work with stiffer springs and lowering springs (we recommend h&r or eibach) and have a fully threaded body for individual lowering like the original 993 cup suspension. Lowering is adjustable to 35 mm (1.37 inches) sold individually. For matching club sport shocks, please order part # 1150002re for the right and 2 qty. Part # 1150009 for the rear. For a properly spec'd complete kit including front and rear club sport shocks with lowering springs and rear drop links, please order part # FVD33399300.
$517.00
Make a selection 115000003R01 Support nut for our part # 115114 115115 and 115116 etc. Internal thread: 4.7cm total height of the ring: 2.2cm height of the upper part of the screw ring including the thread: 1.4cm sold individually like new
$1.80
Make a selection 170211015 This stainless-steel heat control box is a quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For proper installation, we recommend a new exhaust gasket, part # 91121129700 clamp, part # 90121105122 and connecting piece, part # 91165911900ssi sold individually. 1 necessary per car.
$179.30
Make a selection 150TBF900 Replace worn-out original front control arm / wishbone bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. This is located at the front of the control arm / wishbone. The correct matching poly-graphite bushing for the rear of the control arm is part # 150tbr900 sold individually. 2 necessary per car.
$48.40
Make a selection 129T851852 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Please note: if you are installing these on a 928, body work will be required. Sold individually.
$342.10
Make a selection 115966 (2) model 928: parts of the suspension must be changed depending on manufacture date.
$521.40
Make a selection 150PB100919 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$44.00
Make a selection 91179950513EQ Don't let a worn, faded bellows detract from your cars exterior. Replace it with this replacement part for original number, 911 799 505 13. This is made by dansk, they offer a complete line of aftermarket replacement bodywork to complement the entire Porsche model range. All dansk aftermarket products are manufactured with quality and cost effectiveness in mind. Sold individually. 1 necessary per car. Driver's side fitment (lhd).
$33.00
Make a selection 9117310316003 Quality German aftermarket replacement for original part # 911 731 031 60. This is designed to perform like the original and is made from period correct material. Sold individually. 1 necessary per car. Please note: drivers side sun visor for a left-hand drive car only (lhd). The matching right side is our part # 9117310326003
$112.20
Make a selection 846R9004 Tig welded, type 304, stainless steel. Finish: satin finish stainless weight: 5oz. Models: 996/997, Boxster, 911 & 944 installation: secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point. Miscellaneous: recommended for extra-low seating applications where the 846r-9001 sits excessively high. One pair will work for both seats. Note: part# 846r-9002 hardware kit is required for installation in (1985-1989) model Porsches. Use part 846r-9003 for outside belt mount. General FitmentALL
From $84.80
Make a selection 150PB100918 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$44.00
Make a selection 129T101840 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$446.60
Make a selection 19072197720 Genuine tool sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. Please note: this is genuine part # 000 721 977 20 for reference.
$506.00
Make a selection 17021102501 This is a high-quality replacement for original number, 930 211 025 01 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911102 sold individually. Right or left side fitment. 2 necessary per car. Please note: this will not fit u.s. 3.0 l SC mode...(choose a part on the right to read more)
$642.40
Make a selection 170211014 This steel heat control box is a quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For proper installation, we recommend a new exhaust gasket, part # 91121129700 clamp, part # 90121105222 and connecting piece, part # 91165911900 sold individually. 1 necessary per car.
$148.50
Make a selection 19072191100 Genuine part # 000 721 911 00. We source this part at Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually.
$103.40
Make a selection 129T111840 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$446.60
Make a selection 129T101854 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$446.60
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |