This is the female of the two required bushings per wiper shaft. easily installed with the rack removed.
Known as: rubber bush

View/Change Diagram

911 1970-73 - Electrical	911 1974-77 - Electrical
911 1978-83 - Electrical	911 1984-86 - Electrical
911 1987-89 - Electrical	930 1975-77 - Electrical
912 1965-69 - Electrical	924 1976-79 - Electrical
924 1980-85 - Electrical	924 1986-88 - Electrical
928 1978-82 - Electrical	928 1983-86 - Electrical
944 1982-85 - Electrical	911 1989-94 - Electrical
914 1970-76 - Electrical	914 1970-76 - Electrical
911 1965-69 - Electrical

The 997 turbo ipd "y" pipe was built for the more demanding turbo performance customer. The factory y pipe becomes restrictive when adding substantial power gains. The ipd "y" pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory y pipe delivering the additional power needed to raise the performance bar on any turbo. The ipd "y" y pipe is designed to be a direct replacement of the factory OEM y pipe. There are no modifications or fabrication required for installing the ipd y pipe. This is an easy and straight forward r & r (remove and reinstall) bolt on upgrade. Note: contains everything nec...(choose a part on the right to read more)

Pagid yellow rsl1 are from the rsl line of endurance racing brake pads. They are a high friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl1 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and have good friction stability vs. Temperature. Applications include: GT cars, touring cars, prototype racing and in spring racing. Features at a glance: high friction coefficient high bite high fade resistance high pad and disc life high modulation pagid is one of the leading manufacturers of racing brake pads and is successful at the world's most demanding racetracks. They offe...(choose a part on the right to read more)

Pagid yellow rsl29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a g...(choose a part on the right to read more)

Looking for a more cost-effective solution than ordering a new link? Let us recondition your original drop link. The reconditioning process includes full inspection, disassembly, degreasing and media blasting. Once fully prepared, we properly install new bushings, finish with a corrosion proof coating and include a new lock nut. Please note: each link is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your link we will notify you as soon as we can. Arrangements can be made for its return to you. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check sto...(choose a part on the right to read more)

If your brake pads are at the end of their service life you will experience vibration, squealing, a pulsating brake pedal or poor response under heavy braking. We recommend replacing them as soon as any of the above signs are noticed. Also, be sure to inspect the rotors when changing the pads. For convenience, we sell complete rotor and pad kits, simply check under brake service kits. This pad set contains textar OEM (original equipment manufacturer) parts that we source in Germany to ensure quality, reliability and precise fitment. Textar brake pads are precision engineered to offer maximum safety, performance and comfort. This uncompromising approach has been the very ethos of textar for more than 100 years. ...(choose a part on the right to read more)

The tow link is the furthest rear control arm on the rear axle. It is responsible for the toe angle adjustment. The OEM control arm bushings are simply too soft for track events and the teflon monoball racing bushings are too far too hard and noisy for street cars. Our sport bushings are made of a denser rubber (85 shore opposed to OEM 65 shore), which means that they are suitable for street and track use. Equally as important is that they do not produce any noise like the teflon bushings. FVD sport control arm facts: - better handling and more responsive. - makes precision adjustments of the suspension easier. - does not produce noise. - shore a hardness value of 85 for durability and handling. - fit's like o...(choose a part on the right to read more)

FVD Brombacher997.2 tt "700 series" upgraded turbos facts: - modified compressor housing for the 3.8 l displacement - modified & lightened billet compressor wheel with 12 blades - 49.55 mm inducer - 68 mm exducer - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already running FVD software we start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power), and aids i...(choose a part on the right to read more)

FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)

The symptoms of a worn tie rod end include, clunking, rattling and squeaking when turning, poor alignment and premature tire wear. Have the rod ends inspected when servicing your suspension and proactively change them when noticing any of the symptoms. Quality European aftermarket replacement designed to perform like the original. Sold individually. Left or right-side fitment. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The reconditioning process includes full inspection of the cross member to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we seal it with a corrosion resistant plating. Send us your cross member and we will have it reconditioned for you. We do not offer a core exchange on this part. If your original part is defective and cannot be salvaged, we will notify you and make arrangements for its return. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Oversize shipping charge will apply.
This rear deck lid with integral lemans style spoiler for the 914gt look fits all 914 models. It has an ultra strong foam core and composite multi-layer construction on the outer section or "deck lid skin" which is hand laid and vaccuum bagged. The inner deck re-inforced frame is then bonded onto the outside skin in the mold preventing any flexing utilizing state of the art 2 part adhesives. This deck lid has threaded inserts and is designed to use the existing hinges and latching mechanism. Average weight: 14 lbs .

The corbeau 5-point 3-inch camlock harness belts are sfi 16.1 approved. Our camlock harness belts feature the quick release camlock dial and either bolt-in or wrap around mounting. With the camlock dial, the right lap belt remains locked and the other four straps disengage when turning the dial.

General Fitment

Design must be functional - perfect symbiosis of comfort and design
The recaro style appeals to demanding individualists for whom lifestyle doesn't stop on the car door. Revolutionary technology, excellent comfort and safety - packed in an attractive sporting design.

Standard features:

fully upholstered headrest with height and tilt adjustment
Recline adjustment on both sides
Seat backrest release on both sides
Recaro airmatic® system for lumbar support
Extendable seat cushion
Seat cushion mounted in roller cup bearings
Seat-integrated controls
Steel shell
Also available in ?xl?:
60mm higher (backrest +40mm, headrest extends 20mm)
(recaro style ?xl?) for the much taller driver
...(choose a part on the right to read more)

General Fitment

Design must be functional - perfect symbiosis of comfort and design
The recaro style appeals to demanding individualists for whom lifestyle doesn't stop on the car door. Revolutionary technology, excellent comfort and safety - packed in an attractive sporting design.

Standard features:

fully upholstered headrest with height and tilt adjustment
Recline adjustment on both sides
Seat backrest release on both sides
Recaro airmatic® system for lumbar support
Extendable seat cushion
Seat cushion mounted in roller cup bearings
Seat-integrated controls
Steel shell
Also available in ?xl?:
60mm higher (backrest +40mm, headrest extends 20mm)
(recaro style ?xl?) for the much taller driver
...(choose a part on the right to read more)

General Fitment

The solution for lubricating hard-to-reach parts! This remarkable product sprays on and penetrates to the tightest areas then sets up in seconds to a high-temp grease with high adhesive qualities. No shop or home garage should be without it. Thousands of uses. 500 ml spray can with long nozzle.

General Fitment

High performance brake fluid for the extreme demands of motor racing or just street racing! Thanks to its outstanding wet boiling point, it has the highest safety reserves. 1 liter.

General Fitment

The solution for lubricating hard-to-reach parts! This remarkable product sprays on and penetrates to the tightest areas then sets up in seconds to a high-temp grease with high adhesive qualities. No shop or home garage should be without it. Thousands of uses. 500 ml spray can with long nozzle.

General Fitment

Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. All performance products torsion bars are guaranteed for 3 years against breakage. Note: worn torsion bar bushings will shorten the life of torsion bars. Our 3-year guarantee will remain valid only when bushings are in good condition at time of installing new torsion bars. Sold in pairs.

General Fitment

911/930 1965-89 rear brake/tail light bulb

911 1989-98 brake/tail light bulb

911 1998-04 front turn signal bulb
911 1998-04 back up bulb

914 1970-76 front turn signal bulb
914 1970-76 rear brake light/tail light bulb

924/924s 1976-88 front turn signal bulb

944 1983-91 front turn signal bulb

968 1992-95 front turn signal bulb
968 1992-95 rear turn signal bulb

Boxster 1997-04 front turn signal bulb
Boxster 1997-04 rear turn signal bulb
Boxster 1997-04 brake light bulb
Boxster 1997-04 back up light bulb

View/Change Diagram

911 1978-83 - Electrical	911 1987-89 - Electrical
911 1987-89 - Electrical	924 1976-79 - Electrical
924 1980-85 - Electrical	924 1986-88 - Electrical
928 1987-91 - Electrical	928 1987-91 - Electrical
928 1992-95 - Electrical	928 1992-95 - Electrical
944 1982-85 - Electrical	944 1985-88 - Electrical
944 1985-88 - Electrical	944 1989-91 - Electrical
944 1989-91 - Electrical	911 1989-94 - Electrical
911 1989-94 - Electrical	968 1992-95 - Electrical