Front; one kit per control arm

Diese buchse ersetzt an ihrem vorderen querlenker die hintere buchse. Wie oe in 65 shore harte. Preis pro satz, pro querlenker wird ein satz benotigt.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Finally, a complete solution to properly widen the front track width of a Porsche 996 and 997 turbo. To help increase front end grip, this kit allows full negative camber adjustment without binding the axles and fitment of wider wheel/tire combinations and GT3 cup car fenders. Each kit includes lower control arms, thrust arms, axle spacers, upper mounts, and camber shims.

Features
• improved two piece 996 GT3 lower control arm design
• stronger than cast motorsport cup arms
• allows proper camber adjustment
• uses GT3 shims to adjust camber & lower control arm length (sold separately)
• high-strength steel alloy spherical bearings, completely serviceable unlike the motorsports arms
• sealed monoball inner bearing
• allows easy access to inner arm hardware
• includes adjustable thrust arm bushings to adjust caster and wheelbase
• a must have for all track and race enthusiast
• each kit includes pair of 2 arms
• fits both front and rear axles
• compatible with all 996/997/987/981 models except GT4

Rear toe control arms - order in pairs only restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can't compensate enough when lowering your Porsche, leaving you stuck with as much as ½ of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.

This item may need...(choose a part on the right to read more)

This kit is complete and includes the front and rear monoball cartridges with press tools. Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 t6 aircraft aluminum. They will positively locate the suspension arms so suspension motion is accurately repeated in every corner. Sold as a set of 4. 1 kit is necessary per car. Please note: noise may resonate inside the cabin during street use.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Original rubber replacement bushing (65 shore hardness value) for the rear control arms (camber link and caster link). This bushing cartridge is weather sealed and is crafted in high carbon steel and 7075 t6 aircraft aluminum. Sold individually.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

We will send you a reconditioned control arm, kindly send back your old part, or core . The reconditioned control arm has been full inspected, disassembled, degreased and we have properly installed FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. This part is sold on an exchange basis, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and r...(choose a part on the right to read more)

Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)

Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)

Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)

This is a cost effective alternative to buying new control arms. Replace worn-out original soft rubber (65 shore hardness value) control arm bushings with new bushings of the same rubber (65 shore hardness value). This bushing set is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes a 65 shore hardness value cores. This is a front and rear bushing for the front lower control arm (wishbone). 2 sets are necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

By ordering this part number you get after previous sending in your wishbone overhauled with new race-silent blocs back. The race-silent blocs (85 shore) give you more stable driving. Should it not be repairable, we will inform you immediately.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Diese buchse ersetzt an ihrem vorderen querlenker die mittlere buchse. Es handelt sich bei dieser buchse um einen hartegrad von 85 shore wie original bei den rs -modellen ( GT3 rs, GT2 rs ) preis pro stuck, pro querlenker wird ein stuck benotigt.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Replace worn-out original front lower control arm bushings with our FVD sport bushings, made of rubber with an 85 shore hardness value that is the same as the rs models. 85 shore is more durable, provides more positive suspension location and is still quiet and comfortable for street use. Features: better handling reduces that sloppy steering feel makes precision adjustments of the suspension easier does not produce any noise like the teflon bushings. Rubber has a shore hardness value of 85 (like rs models) fit's like oem, simple installation made in Germany set is sold per axle. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be ...(choose a part on the right to read more)

Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)

Known as: rear axle link

View/Change Diagram

924 1976-79 - Rear Axle	924 1976-79 - Rear Axle
924 1980-85 - Rear Axle	944 1982-85 - Rear Axle

Pentosin antifreeze is an antifreeze for passenger cars and trucks, meeting the quality requirements of the automotive manufacturers, especially suitable for alloy engines. It protects excellently against corrosion and cavitation, does not foam, prevents lime formation and is neutral to different types of metals , rubber parts and sealing materials which are used in the engine construction. Pentosin antifreeze is produced under stringent quality controls and has proved excellent operating performance in daily use. Pentosin antifreeze is free of nitrite, amine and phosphate. Lifetime antifreeze is recommended for Porsche Boxster, Cayman, Cayenne, and 911 (1998-present) models.

General Fitment

+140 crank hp & +155 crank tq gain on the turbo and +100 crank hp & +126 crank tq gain on the turbo s. All while offering ultra-smooth drivability and reliability that you expect from your Porsche. Package includes: - FVD my genius handheld flash tool (included). - FVD tuning software FVD99161840mg. - bmc sport filter 47079801. - FVD sound version valved muffler with 200 cell hjs tri-metallic cats bes99120240skhd. - valve control module with remote control beskls001001. - FVD headers bes99101040s. - FVD exhaust installation kit (everything needed for simple installation). FVD software power gains: max. Power - 485 kw (660 hp) @ 6500rpm max. Torque - 870 nm (642 lb.-ft.) @ 3750rpm max. Speed - 330km/h (206 mph) ...(choose a part on the right to read more)

Kit includes everything for performing hundreds of automotive diagnostic and mechanical tests. Used for one-person brake bleeding, produces vacuum or pressure at the turn of a switch. Comfortable ergonomic design with one-finger trigger vacuum/pressure release. Durable die-cast metal construction for long life. Pressure and vacuum are created on the squeeze stroke for superior accuracy and control.

Includes:
• silverline elite hand vacuum/pressure pump with 2" (50 mm) compound gauge with rubber boot
• 4.5 oz. (135 ml) fluid reservoir bottle with fluid transfer and storage lids
• 4 tapered adapters for connecting to tubing from .09" (2.3 mm) to .50" (13 mm) id
• 2 tapered manifold plugs
• 4 ...(choose a part on the right to read more)

General Fitment

Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 478kw (650hp) @ 8000rpm max. Torque - 640nm @ 6000rpm max. Speed - 340km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.8s our Carrera GT ecu programming offers you not only more power and torque but phenomenal sound! Within the cgt end muffler is a flap-type mechanism fitted which is controlled by vacuum units. These vacuum units are also controlled by the ecu. Our programming modifies the control of these f...(choose a part on the right to read more)

New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa.

Beautiful rsr finish

15 x 9

-3 offset

15 pounds

Super strong and durable. this testimonial from a rally driver proves just how durable braid wheels are!

"i...(choose a part on the right to read more)

General Fitment

This size was specifically developed to offer 944 cup racers exactly the wheel they are looking for!

New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa.

15 x 9

+15 offset

15 pounds

Super strong and durable. this...(choose a part on the right to read more)

General Fitment