Vehicles
Sections
440 not categorized PORSCHE 964 AM FMCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 924 1980-85 (includes uncategorized and accessory items)
$65.29
Make a selection 91173104303 Please specify color when ordering View/Change Diagram
$62.10
Make a selection 96455550700EQ A-pillar lining made of original leatherette material, sourced and manufactured in Germany. Each is cut, sewn and trimmed for precise fitment. We go to extra lengths to ensure that our linings are as similar to the originals as possible. Replaces original part # 964 555 507 00 05t made in Germany. Sold individually. 1 necessary per car.
$102.17
Make a selection 96434101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for...(choose a part on the right to read more)
$462.13
Make a selection 99335140887 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$795.96
Make a selection FVD34101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$451.44
Make a selection WAP05026019 Four glasses depicting the following Porsche 911 road vehicles: 911/901 (1964), 911 Carrera rs 2.7 (1973), 911 targa (1988) and 911 Carrera 3.6 speedster (1993). Comes in high-quality gift packaging. Imported. General FitmentACCESSORY
$136.62
Make a selection 96450520280 Fits all turbo or wide body's. For 964 (narrow body) please order 964 505 202 81.
$433.62
Make a selection 99335140787 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$795.96
Make a selection FVDBSK352965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (genuine), part # 96535204100 & 96535204200 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (34 mm piston), part # 96535209601 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 please note: this kit fits both the 965 3.3l and 3.6l.
$1,755.86
Make a selection FVDBSK351930003 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (zimmerman), part # 93035104703eq & 93035104803eq 1 qty. Oem set of rear pads (textar), part # 96435193903 2 qty. Oem brake warning sensors, part #94461221105 sold as a set. 1 necessary per car.
$438.37
Make a selection FVD351425426EQ A quality, cost effective set of replacement "big red" style calipers. These are a direct replacement for the 965 turbo, 993 c4s / rs and 993 turbo but can be installed on many 964 / 993 models with the correct caliper adapters. Please contact your FVD parts specialist for fitment questions. We also recommend swapping out your brake lines for a set of stainless braided lines when replacing calipers. Also a now is the time to install a set of our speed bleeders, part # FVD910102. They are comparable to part numbers 993 351 425 10 and 993 351 426 10. Please note: these are aftermarket calipers and do not come with the logo or brake pads. Sold individually. 1 necessary per car.
$944.46
Make a selection FVDBS351930003 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of front pads (4 total), part # 96435193903 2 qty. Oem brake warning sensors, part # 94461221105 sold as a set. 1 necessary per car.
$91.48
Make a selection FVD51296501S Please note: this wing will only work on turbo decklids. Does not fit 964 c2 or c4 rear deck lids.
$2,175.23
Make a selection FVD347964993 If you are running 17" or 18" wheels, this is a must. It limits the steering angle so that the tires will not rub the chassis. It mounts on the inner tie rod nearest the steering rack. This is a direct replacement / alternative for Porsche part # 964 347 325 02. Made in Germany. Sold individually. 2 necessary per car.
$22.57
Make a selection 115900991BI Only for cars without pdcc ( active stabilizer ) bilstein b16 (pss10) suspension kits feature ride height adjustability with 10-stage manually adjustable dampers. Simply adjust compression and rebound settings, from comfort to competition, by rotating the setting number knob at the base of the shock. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Ride height is adjustable from 1.0 to -1.5 20-40mm (front) & -1.0 to -1.5 20-40mm (rear - minimum 1 lowering). Bilstein b16 (pss10) suspension allows you to enjoy the kind of precise suspension tuning formerly available only on race cars. We recommend purchasi...(choose a part on the right to read more)
$4,485.89
Make a selection 087409641AL Known as: adjusting shim View/Change Diagram
$1.90
Make a selection 087409641AK Known as: adjusting shim View/Change Diagram
$1.90
Make a selection 087409641T Known as: adjusting shim View/Change Diagram
$6.43
Make a selection 00004317200 Known as: sealing cord / sealing cord roll with 10 meters $ 9 mm View/Change Diagram
From $113.32
Make a selection 087409641Q Known as: adjusting shim View/Change Diagram
$6.43
Make a selection 087409641AS Known as: adjusting shim View/Change Diagram
$8.11
Make a selection 087409641AG Known as: adjusting shim View/Change Diagram
$1.90
Make a selection 087409641E Known as: adjusting shim View/Change Diagram
$6.43
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |