Vehicles
Sections
50 not categorized PORSCHE 944 S2 FRICTIONCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 914 1970-76 (includes uncategorized and accessory items) 24135199702YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$400.36
Make a selection 240981351RSL1 Pagid yellow rsl1 are from the rsl line of endurance racing brake pads. They are a high friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl1 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and have good friction stability vs. Temperature. Applications include: GT cars, touring cars, prototype racing and in spring racing. Features at a glance: high friction coefficient high bite high fade resistance high pad and disc life high modulation pagid is one of the leading manufacturers of racing brake pads and is successful at the world's most demanding racetracks. They offe...(choose a part on the right to read more)
$793.58
Make a selection 935FSUSP This light weight, bolt in kit replaces the factory front suspension arms, cross-member, and rubber bushings when converting to a coil over front suspension system. General Fitment911 1965-69911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76
$1,998.00
Make a selection 24135296401BS Highlights: superb daily driver, OEM replacement, r90 type approved pad. Features red "brake in" surface coating for instant safe braking after install. New 100 % eco friendly material with zero sulphides. No shims for noise reduction needed. More bite from cold. Works in hot and dry climates as well as in cold. Fully r 90 approved. If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad? The blackstuff brake pad is a total non metallic pad containing zero steel fiber, maki...(choose a part on the right to read more)
$133.06
Make a selection 99919217350EQ A severely worn a/c belt will no longer be able to grip the pulleys and will start to slip and cause a loud squealing noise when the a/c is turned on. Belts undergo a lot of friction and wear. They are cost effective to change and will keep you're a/c functioning properly. Be sure to follow recommended service and replacement intervals set by Porsche on belts. High-quality OEM Bosch replacement belt, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$20.20
Make a selection 91442422403 This is the shifter bushing that fits into the firewall on all 73-76 914 models. if you think that your late 914 shifter is sloppy this is usually the culprit and do not think that you need a short shift kit! easily replaced once the rear shift rod is removed you may want to purchase the rear crown and cup bushings as well (91442422402 and 91142413900) and use a little grease when installing. Order our special firewall conversion bushing when installing the late model shift linkage in your early 1970-72 914. View/Change Diagram
From $9.18
Make a selection 91454230710 Side glass roller for all 70-72 914 models four required per glass. also order the friction washers b91454221710. Makes for a tight rattle free side glass along with one that rolls up easily. make sure you check the rear bottom window guide for being there and grease the rollers lightly. View/Change Diagram
From $6.62
Make a selection 24135299702YS High efficiency performance and race brake pads for track & street use. These are a high friction pad that are very resistant to heat and are fast to bed-in. Yellowstuff has been used with great success in both race and street cars. Yellowstuff is an aramid fiber-based brake compound with high brake effect even when cold. Yellowstuff is possibly one of the first ever compounds that can be used for street or track driving. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider ebc redstuff. Features: made for up to 900*c (1,650*f). Developed for race cars but are stree...(choose a part on the right to read more)
$307.69
Make a selection SP193H Spec stage 2+ clutches feature a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. General Fitment914 1970-76
$750.60
Make a selection ER2081500 Need more camber?elephant racing de-cambered ball joints provide up to 3/4 degree additional negative camber per side. track is widened up to 1/2 inch. The ball joint stud is non-concentric with the housing, effectively lengthening the control arm and pushing the bottom of the strut (and tire) out resulting in added negative camber. Construction includes a true spherical bearing monoball for low-friction, freedom of movement and zero deflection. fully weather-sealed, de-cambered ball joints are a true bolt-in using factory ball joint hardware. General Fitment911 1970-73911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76
$507.60
Make a selection 99919233850EQ Belts undergo a lot of friction and wear. They are cost effective to change and will keep your alternator and engine in good condition. Be sure to follow recommended service and replacement intervals set by Porsche on belts. Please note: specific model fitment information below. Sold individually. 1 necessary per car.
$15.44
Make a selection SP103H Spec stage 2+ clutches feature a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. General Fitment914 1970-76
$745.15
Make a selection 99919209750EQ Belts undergo a lot of friction and wear. They are cost effective to change and will keep your alternator and engine in good condition. Be sure to follow recommended service and replacement intervals set by Porsche on belts. High-quality replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
$10.69
Make a selection HB172N Hp plus brake pad compound is ideal for autocross and track day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. Hp plus utilizes a unique ferro-carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, solo ii and “track day” applications. The ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. All hawk hp plus / autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials. General Fitment911 1970-73911 1974-77 911 1978-83 356 1960-65 914 1970-76
$70.19
Make a selection 700014 Ate plastilube is a clear, high temperature grease designed for braking components. Apply to caliper slide pins, pad backing plate to carrier contact areas and pad backing plate to caliper contact areas to prevent brake squeal. Do not apply to pad friction face or brake disc. Also works great for window regulators, sunroof mechanisms, plastic gears and other parts. General FitmentALL
$10.26
Make a selection 700015 Ate plastilube is a clear, high temperature grease designed for braking components. Apply to caliper slide pins, pad backing plate to carrier contact areas and pad backing plate to caliper contact areas to prevent brake squeal. Do not apply to pad friction face or brake disc. Also works great for window regulators, sunroof mechanisms, plastic gears and other parts. General FitmentALL
$8.64
Make a selection 021101025H When rebuilding, one of the most important things to start with is a clean and true engine case. Over the years many cases have warped internally, causing excessive friction, poor oil pressure, and/or a hot running engine. Don’t take a chance, start with something thoroughly checked and align bored. This part requires a core charge, refundable upon receiving your rebuildable case.
From $555.23
Make a selection 240991351RSL01 Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: * 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. * 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. * 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period. Rsl29/yellow: featu...(choose a part on the right to read more)
$866.05
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |