PORSCHE 924 S BUILDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 914 1970-76 - Engine (includes uncategorized and accessory items) 022101559S One of the most required and necessary-to-replace parts in any 914 engine rebuild. This plate is the seal that fits the baffle windage tray into the bottom of the engine case. Super high-temperature made from that latest silicone rubber technology. General Fitment914 1970-76
$17.38
Make a selection FVD201911RSR110 Whether you are restoring a tribute car or endurance racing your 911, this tank will fit the bill. It is made in Germany from pvc plastic and includes high grade threaded brass inserts. It is build by fia specs and can be adapted to work in all 911's from 67-89. It holds a capacity of 29 gallons or 110 liters.
$3,065.70
Make a selection 930123002X This remanufactured turbo is a direct replacement for original part # 930 123 002 00. The remanufacturing is completed in Germany by kkk/borg warner certified technicians. This ensures reliability, superior performance and cost effectiveness. The remanufacturing process includes: complete disassembly. All parts are cleaned, inspected and measured for tolerances. Turbine wheels are replaced. Thrust bearings are replaced. All new seals are installed. Internals are reconditioned. Parts are balanced (static & dynamic) according to balancing protocol. For a complete installation we recommend adding a gasket, part # 93012319105 an intake sleeve, part # 93011015801 and be sure to have a few spare studs on hand, part #...(choose a part on the right to read more)
From $2,981.74
Make a selection FVD123014 K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection 93060610500ATK The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, clean, degrease and rebuild to factory specifications. Remanufacturing is done in Germany, so the lead times can vary. Send us your original warmup regulator and we will have it remanufactured for you. We do not offer a core exchange on this part. Please note: please package your part as carefully as possible to ensure that damage is not caused en route to us.
$744.70
Make a selection 99310117054 This is the original stud used in the rennsport and turbo (m64.20 / 60) models. We recommend them for your next engine rebuild. Sold individually. 24 necessary per car.
From $53.90
Make a selection 99310090470 FVD engine gasket sets contain high quality German sourced motorsport gaskets. This kit contains upper and lower gasket sets to make a teardown / rebuild more convenient. Sold as a complete set. 1 necessary per car.
$539.95
Make a selection 96410524707GU This fits 964 c2 / c4 and rs models with engine codes # m64.01/02/03. This is an OEM part, sourced directly from Germany. Professional installation is required. Different manufacturing tolerances require an inspection of the free clearance of all parts! If you're not sure about what parts are right for your build, be sure to ask one of our parts specialists. Sold individually. 1 necessary per car.
$932.80
Make a selection 96410090800EQ FVD cylinder head gasket sets contain high quality German sourced gaskets, seals and o-rings. This kit contains a complete set of gaskets to make a teardown / rebuild more convenient. Sold as a complete set. 1 necessary per car. To complete the gasket set for the whole engine order please 93010090104eq too.
$744.70
Make a selection FVD123013 K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection BK7031 Based on complete teardown and rebuild, this well-respected haynes manual explains step-by-step procedures accompanied by hundreds of easy-to-follow photographs. The information is compiled from hands-on experience using common tools, and includes special troubleshooting. From simple oil or plug changes through complete tune-ups, clutch changes, or transmission rebuilds, the haynes manual covers all Porsche 911 coupe, targa and cabriolet models 1965 through 1989. General FitmentACCESSORY
$38.75
Make a selection FVD123013ATK K-16/24 turbo (up to 555 hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbochar...(choose a part on the right to read more)
$2,976.60
Make a selection 94410527704 A worn camshaft will greatly reduce power as valve lift is limited by a worn lobes and lifter surfaces. It is critical to replace both camshaft and lifters with any rebuild! View/Change Diagram
From $985.99
Make a selection FVD10699601 For 986 (Boxster) and 996 modell. Fits left and right side. - specially designed for tuned and motorsport vehicles the racing & high performance division of csf build and engineer the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers radiators with high performance all-aluminum and direct-fit replacement for racecars. The only high performance manufacture to feature this advanced technology. These radiators are stamped to the same geometry of the application's original plastic end radiators. These tanks feature less welding, and are generally considered the strongest tank designs in the industry.
$548.90
Make a selection FVD10699703 For 996 turbo and 997 turbo, 996 GT3l. Fits left side. - specially designed for tuned and motorsport vehicles the racing & high performance division of csf build and engineer the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers radiators with high performance all-aluminum and direct-fit replacement for racecars. The only high performance manufacture to feature this advanced technology. These radiators are stamped to the same geometry of the application's original plastic end radiators. These tanks feature less welding, and are generally considered the strongest tank designs in the industry.
$768.90
Make a selection 96410524609GU This fits 964 c2 / c4 and rs models with engine codes # m64.01/02/03. This is an OEM part, sourced directly from Germany. Professional installation is required. Different manufacturing tolerances require an inspection of the free clearance of all parts! If you're not sure about what parts are right for your build, be sure to ask one of our parts specialists. Sold individually. 1 necessary per car.
$932.80
Make a selection N01413957 Have you lost your engine sheet metal screws and can’t find the substitutes? You’ll need many of these screws when rebuilding, as lost and broken screws are common. These shiny, plated screws also dress up your rebuild. General Fitment914 1970-76
From $1.00
Make a selection RES987202TH1OK The heat reduction for exhaust systems with thermal insulation come first in motor sport. By reducing the heat buildup under the vehicle and in the engine compartment cooler air intake temperatures are reached which leads to a noticeable performance increase. Vehicles with increased power produce also higher exhaust temperatures. Exhaust systems with thermal insulation also protected adjacent components from these temperatures. Benefits for thermal insulation: - performance improvement - increasing the efficiency of the engine - cooler air intake - reduce the heat buildup under the vehicle - reduction of fuel consumption - faster response for catalysts (shorter heat cycle) - temperature resistance more than 110...(choose a part on the right to read more)
$1,361.80
Make a selection MIS142 When you build a performance engine for your 914 and add carbs, the high performance camshaft is a must! It will increase high rpm power for faster acceleration. Cut from a new billet, it will last the life of your engine. (whenever replacing the cam you need to replace the lifters, so see part number rmis 138). General Fitment914 1970-76
$116.95
Make a selection HEI911001008S Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Tig welded. Semi-gloss black finish. Please note: these bars are hand made to order. They typically take between 4-16 weeks. Every heigo bar or cage is considered a motorsport part and is a special-order item. Moto...(choose a part on the right to read more)
$1,086.80
Make a selection MIS141 When you build a performance engine for your 914 and add carbs, the high performance camshaft is a must! It will increase high rpm power for faster acceleration. Cut from a new billet, it will last the life of your engine. (whenever replacing the cam you need to replace the lifters, so see part number rmis 138). General Fitment914 1970-76
$119.00
Make a selection MIS139 When you build a performance engine for your 914 and add carbs, the high performance camshaft is a must! It will increase high rpm power for faster acceleration. Cut from a new billet, it will last the life of your engine. (whenever replacing the cam you need to replace the lifters, so see part number rmis 138). General Fitment914 1970-76
$166.50
Make a selection HEI981001001S Heigo motorsports has been building extremely safe roll cages and roll bars for Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. Chromoly steel 1.5 inch diameter tubing, .098 wall thickness tubing. A true bolt in bar that does not require drilling or welding. Includes a harness bar which is located on the b-pillar hoop. Bars which connect to the main hoop, use a connecting joint system so that you can easily access the motor without the use of tools. Tig welded. Retains full seat adjustability. Factory seat belts or 5-6 point belts can be used. Semi-gloss black finish. The front hoop mounts to the upper bulkhead, in the OEM m...(choose a part on the right to read more)
$1,428.90
Make a selection FVD99661831MG Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 265kw (360hp) @ 7200rpm max. Torque - 370nm (273lbf ft) @ 5000rpm max. Speed - 302km/h max. Rpm - 7600rpm acceleration 0-100km/h - 4.8s tuning: max. Power - 276kw (375hp) @ 7000rpm max. Torque - 390nm (288lbf ft) @ 5000rpm max. Speed - 310km/h max. Rpm - 7900rpm acceleration 0-100km/h - 4.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while re...(choose a part on the right to read more)
$1,204.50
Make a selection 964347009BXATK This steering rack is a remanufactured part with a core, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and resell-able, the core deposit will be refunded. The remanufacturing process includes full inspection and testing for structural integrity. We then disassemble and bead blast to remove corrosion. Internals are micro-finished to OEM specifications. Sealing surfaces are carefully checked and restored prior to installing new premium seals and o-rings. Each unit is then carefully tested for full functional...(choose a part on the right to read more)
$1,633.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |