![](https://30ed524141d0cac60ab4-d2e2d18a14257de3b9ce428cf077ee97.ssl.cf2.rackcdn.com/acban.jpg)
PORSCHE 924 S CHANGECan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 912 1965-69 - Uncategorized (includes uncategorized and accessory items) ![]() 00004490042 Cabriolets are not known for having great acoustics inside the passenger compartment. However, the new Porsche Boxster high performance audio system changes all that. Explicitly designed for the interior and layout of the Boxster, the system delivers outstanding performance with either the roof on or off. The specially designed amplifier delivers two channels of 160 watts each, powering 2 ohm speaker sets. Two high-quality mid-range/tweeter systems coupled with a dual bass system in the door deliver incredible sound while being elegantly integrated within the Boxster's interior. Installation requires some knowledge of stereo installation, but in general is not too complicated. Beethoven or boston, the music wi...(choose a part on the right to read more)
$4,214.03
Make a selection 93060291901A Replacing your distributor cap at regular intervals is highly recommended. The cap is susceptible to carbon deposits and can also develop hair line cracks due to heat and vibration. Those cracks allow moisture and debris in which hampers ignition and can erode terminals. We recommend closely examining both caps prior to ordering and replacing both if necessary. It is also a good idea to change the rotors at the same time, part # 93060290202 and the dust covers 93060290900. Sold individually.
$158.40
Make a selection 91134101310ATK The reconditioning process includes full inspection of the cross member to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we seal it with a corrosion resistant plating. Send us your cross member and we will have it reconditioned for you. We do not offer a core exchange on this part. If your original part is defective and cannot be salvaged, we will notify you and make arrangements for its return. Sold individually. 1 necessary per car.
$224.40
Make a selection 911606105DXATK The warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary between 6-8 weeks. Sold individually. 1 necessary per car.
$744.70
Make a selection 9963524359A All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$850.30
Make a selection 91121152200B Engine compartment blower to rt. Heat exchanger; 60mm x 1110 mm. Not for ca models; original dark brown paper/aluminum
$15.01
Make a selection 930602702XATK The cdi or hkz as it is known in Germany, is the high-voltage condenser ignition control unit. Aging cdi / hkz units lead to deterioration of performance with time. A failing unit's symptoms include a fluctuating tach, stalling, loss of power to the ignition coil and no start situations, leaving you stranded. Send us your original cdi / hkz and German technicians with many years of experience will completely remanufacture it to new specifications. This is not a repaired unit like many of our competition offer, this is a completely remanufactured unit using new upgraded components. The remanufacturing process includes: disassembly inspection and cleaning complete diagnosis (including oscillogram) on a test benc...(choose a part on the right to read more)
$823.90
Make a selection 930602701XATK The cdi or hkz as it is known in Germany, is the high-voltage condenser ignition control unit. Aging cdi / hkz units lead to deterioration of performance with time. A failing unit's symptoms include a fluctuating tach, stalling, loss of power to the ignition coil and no start situations, leaving you stranded. Send us your original cdi / hkz and German technicians with many years of experience will completely remanufacture it to new specifications. This is not a repaired unit like many of our competition offer, this is a completely remanufactured unit using new upgraded components. The remanufacturing process includes: disassembly inspection and cleaning complete diagnosis (including oscillogram) on a test benc...(choose a part on the right to read more)
$823.90
Make a selection 1159029964WD The ohlins road & track suspension gives our customers a true racing experience, with their own cars, without losing comfort when commuting to work. Our unique dual flow valve (dfv) technology allows you to quickly change the stiffness of the shock absorber. When arriving to the racetrack, just turn the golden knob clockwise on the damper to set it in race mode this action changes all four areas in the damper; low and high speed compression and rebound damping. With ohlins road & track coil overs you will experience a car with blistering response times, improved bump absorption and a massive amount of grip to increase the safety when driving your car on the limit. The car will be easier to balance on the edge o...(choose a part on the right to read more)
$5,635.30
Make a selection 99663114380 Please note: this is for cup / r models up to 2001. They have the cut out for the clear headlight corner trim. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$335.50
Make a selection 91121152200 Engine compartment blower to rt. Heat exchanger; 60mm x 1100 mm. Not for ca models; original tan paper/aluminum
$20.09
Make a selection 220110903ATK More air = more performance * please note: FVD can either charge a core charge or exchange your throttle body.
$485.10
Make a selection 99660301990 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,351.80
Make a selection 9963524369A All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$850.30
Make a selection 99711013190 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$337.70
Make a selection 99710090391 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$861.30
Make a selection 220110905ATK 76,4mm ! More air = more performance supplied with an exchange throttle body. Not for e-gas models 76.4 mm diameter throttle body (1.8 mm larger than stock)
$485.10
Make a selection 0760310874 This book is a must for anyone thinking about rebuilding their own 911's engine. Never-before published information details the nuances of tackling this daunting task! From dropping the engine, to reconditioning and blueprinting, through final reinstallation and break-in, dempsey guides you step-by-step through the pitfalls often experienced by even the best mechanics. Contains reliable information on parts interchange, performance modifications, reliability upgrades, tear down, and potential problems encountered along the way. Essential information for do-it-yourselfers and for those looking to hire a professional. This book provides excellent insight and information into the inner workings of the air-cooled ...(choose a part on the right to read more) General FitmentACCESSORY
$34.50
Make a selection 96410440180 Motorsports item. Sold individually. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$22.00
Make a selection 115966 (2) model 928: parts of the suspension must be changed depending on manufacture date.
$521.40
Make a selection 11533399300600 If you are looking for added damping performance on the street, the bilstein b6 is the ideal solution. If you are running lowering springs, mo30 or mo33 springs, or stiffer springs we suggest the bilstein b8 shocks. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Left or right side fitment. Sold individually. Please note: we do not recommend using the b6 with the ...(choose a part on the right to read more)
$396.00
Make a selection 150BA79185 Increase the horsepower of your 914/6 or 916 with bursch performance headers. They have been dyno, track and street tested since 1958. Bursch headers are available in a variety of diameters to suit your displacement and driving preference. Each hand made header is mandrel bent from durable 16-gauge steel and is coated with 1,200-degree high temp paint. Features: increased horsepower and torque weight savings 16 gauge steel coated in 1,200 degree high temperature paint sold as a set (left and right). 1 necessary per car. Please note: this replaces your stock heat exchangers and does not include heat. These headers do not include provisions for o2 or temperature sensors. Use of this product for purposes other tha...(choose a part on the right to read more)
$1,335.40
Make a selection 90121119401B Engine to heat exchanger; 60mm x 380 mm original dark brown paper/aluminum
$7.85
Make a selection 90121119501B Engine to heat exchanger; 60mm x 458 mm; original dark brown paper/aluminum
$11.06
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |