![](https://30ed524141d0cac60ab4-d2e2d18a14257de3b9ce428cf077ee97.ssl.cf2.rackcdn.com/acban.jpg)
PORSCHE 964 PARTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 912 1965-69 - Transmission (includes uncategorized and accessory items) ![]() 93010090104EQ High-quality victor reinz replacement gaskets, o-rings and washers to reseal your engine case (short block). Victor reinz has been supplying German auto manufacturers and Porsche for decades. They are a trusted name in gaskets and sealing products. This kit is complete with everything needed and we source this directly in Germany for an added level of quality. Sold individually. 1 set necessary per car. Please note: if you prefer the genuine crankshaft sealing ring, please order part # 99911342641 this also includes the intermediate shaft o-ring, part # 99970731540. Please check the model fitment tab to ensure accurate fitment.
$124.74
Make a selection 93010314781SET Oem parts, sourced directly from Germany. Sold individually. 1 necessary per car.
$384.62
Make a selection 91155507860700R01 Genuine part sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Like new
$150.00
Make a selection 96560612601EQ Oxygen or lambda sensors are critical to your engines health. If the sensor is faulty you may experience poor gas mileage, rough idling or engine pinging. High-quality replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Be sure to check the "fits these models" tab to make sure that this will work for your needs. Sold individually. 1 necessary per car.
$116.66
Make a selection 9115550551550EQ Quality replacement headliner for original number, 911 555 055 155 00. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality, factory fitment and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
$262.19
Make a selection 93021123801EQ This part is sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$146.69
Make a selection 44404480062 High quality polished center console set that includes a polished carbon handbrake, the upper switch and lower switch covers made ready for installation. Each piece is a carbon overlay, meant to be adhered to your original plastic trim covers. We recommend adhering the carbon overlays to your originals with würth bond and seal (sold separately).
$1,533.84
Make a selection 444552985051 This is a carbon overlay, meant to be adhered to your original plastic instrument trim. We recommend adhering the carbon overlay to your original with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon overlay to be adhered to the original black plastic piece, part # 911 552 550 00 700 for reference. Sold individually.
$672.21
Make a selection 444552985041 This is a carbon overlay, meant to be adhered to your original plastic instrument trim. We recommend adhering the carbon overlay to your original with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon overlay to be adhered to the original black plastic piece, part # 911 552 549 00 700 for reference. Sold individually.
$807.35
Make a selection 911561023606EQ This is a complete cabrio top cover made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes all of the original tenax snaps / retainers in the original locations. This would replace original part # 911 561 023 60 6ha made in Germany. Sold individually. 1 necessary per car.
$1,387.16
Make a selection 91156128100R01 Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Like new
$44.11
Make a selection 44404480060011 High quality polished switch cover. This is a carbon overlay, meant to be adhered to your original plastic switch cover. We recommend adhering the carbon overlay to your original with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. We also recommend replacing your missing or broken switch cover clips, part # 94455255700. 2 are needed per switch cover.
$562.49
Make a selection 96410440180 Motorsports item. Sold individually. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$22.00
Make a selection FVD803993VR0222 High quality, German made three-point replacement safety belt, designed to perform like the original. Features / specs: belt length: 300 cm (118 inches) 3 point inertia reel belt angle adjustable reel (max. Of 8 *) includes 22 cm (8.5 inch) buckle, installation hardware and caps. Din-en-iso 9001: 2000 quality standard manufactured, e-mark approved. The matching rear belt is part # FVD803993hr sold individually. 2 necessary per car.
$196.35
Make a selection 964541225001 This genuine Porsche windshield seal is an integral part of keeping your cowl from rusting. It is critical that the gasket and windshield are properly installed to prevent corrosion. Sold individually. 1 needed per car. Please note: for the 911 models, this does not contain the trim frame slot for chrome / black trim like the earlier cars.
$406.00
Make a selection FVD6314051US Now we can offer you quality clear turn signals. . They will not fade and discolor with time like those on the market in the past. The set includes 2 qty., 12v 21 watt us spec. Amber bulbs to meet road regulations. Sold as a set. 1 necessary per car. Please note: these are euro spec turn signals, so the flat side reflectors hole for the bulb holder is not cutout. Us customers can drill / dremel out the reflector and install their bulb holder and 2 qty. Bulb part # 99963113890 . Looking for a cost effective h4 euro headlight conversion? Check out our part # FVD63191101
$319.73
Make a selection 95011623712EQ When the clutch pedal is depressed, the hydraulic pressure from the master cylinder engages a piston in the slave cylinder to actuate the clutch fork to release your clutch. If the slave cylinder develops a leak or fails, you will not be able to engage or disengage the clutch to shift gears. Sold individually. 1 necessary per car. We also recommend installing our stainless clutch hose, part # FVD42347700
$132.83
Make a selection 964555251001EQ Attention to detail is what distinguishes our parts from the competition. We source these door handles in Germany to ensure that they are made as closely to the original as possible. Sold individually.
$117.43
Make a selection 96434101807AT By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. This item is also available with race bearings (85 shore).article number FVD 341 018 07at the reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform y...(choose a part on the right to read more)
$438.90
Make a selection 96434123770 Sold individually. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$465.47
Make a selection 96420713004EQ This connects to the side of the oil tank. We recommend replacing 2 qty. Clamps, part # 99951235602 when replacing this piece. Sold individually. 1 necessary per car.
$11.55
Make a selection FVD641200965 Quality made in Germany. We recommend installing a new rubber sealing ring, part # 91164190201. Made of acrylic. Includes the cut out for the trip counter. Sold individually. 1 necessary per car.
$46.20
Make a selection 96434101707AT By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. This item is also available with race bearings (85 shore).article number FVD 341 017 07at the reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform y...(choose a part on the right to read more)
$438.90
Make a selection KEV53100501 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. ** does not include the inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric...(choose a part on the right to read more)
$3,449.99
Make a selection 993606013001 This is a repair kit for original part # 930 606 013 02 and superseded # 993 606 013 00. Kit includes: 1 qty. Plug socket 2 qty. Connectors 2 qty. Gaskets 1 qty. Stopper sold as a kit. 1 necessary per car.
$28.21
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |