PORSCHE 356 A AC VENTCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 912 1965-69 - Front Axle/Steering (includes uncategorized and accessory items) 93035104703EQ The zimmermann OEM brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 1 necessary per car. Rotors should always be changed in pairs; the front right is part # 93035104803eq please note: if you are looking for a kit with pads, etc. Please check our brake service kit selection.
$237.60
Make a selection 93000651001 Decals are commonly overlooked when completing a restoration or refreshing the paint. They are often a key detail that sets a car apart when being judged at an event or being purchased by a keen aficionado. Replace yours with this quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $18.70
Make a selection 93035204601EQ The zimmermann OEM brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Made in Germany. Sold individually. 1 necessary per car. Rotors should always be changed in pairs; the rear left is part # 93035204501eq
$237.60
Make a selection 91135508701EQ Classic Porsche flexible brake hoses can suffer from dry rot and can eventually split and leak fluid, creating a serious safety concern. This line is a high-quality replacement made by brax. It is designed to perform like the original and has the same length and threaded ends. Includes the supporting reinforcement wire like the original. Sold individually. Right or left side fitment. 2 necessary per car.
$22.00
Make a selection 34001127 Bilsteins are original equipment on many Porsches and have won, for Porsche, countless races. Bilsteins are the highest quality shocks made and will last the lifetime of your Porsche. Bilstein heavy-duty shocks and struts provide improved handling and stability without sacrificing the ride. Their superior damping ability makes them ideal for spirited driving while still maintaining an exceptional "street" feel. As with all bilsteins, these units instantaneously self-adjust to changing road surfaces. In addition, their performance does not gradually decline from age, use or heat - requiring no compensating manual adjustments as with conventional multi-tube units. Sold each, two needed for the front of your veh...(choose a part on the right to read more) General Fitment911 1965-69912 1965-69 911 1984-86 911 1978-83 911 1974-77 911 1970-73 914 1970-76
$265.00
Make a selection 91120127200EQ We suggest periodically checking your gas cap seal for fine cracks which produce fumes. If you replace the cap and the fumes persist, check the fuel filler neck, fuel lines, expansion tank and vent shut off valves. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
$14.30
Make a selection
$130.04
Make a selection 911606105DXATK The warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary between 6-8 weeks. Sold individually. 1 necessary per car.
$744.70
Make a selection 1150002RE These are made with club sport events in mind. They work with stiffer springs and lowering springs (we recommend h&r or eibach) and have a fully threaded body for individual lowering like the original 993 cup suspension. Lowering is adjustable to 35 mm (1.37 inches) sold individually. For matching club sport shocks, please order part # 1150002re for the right and 2 qty. Part # 1150009 for the rear. For a properly spec'd complete kit including front and rear club sport shocks with lowering springs and rear drop links, please order part # FVD33399300.
$517.00
Make a selection 028129087 By now even the sheltered front blower box hose has deteriorated to the point of looking bad. Easily renewed, order the 2.25 size for the blower box connections and the 2.0" size for the side dash vents. One hose length will replace one side. The seal, often overlooked, seals the blower box to the cowl and prevents water from entering this critical area. Easily replaced with the blower box still in the car, this would also be a great time to clean the 1973-76 blower grille! One length does both sides.
$13.50
Make a selection 1150009 These are made with club sport events in mind. They work with stiffer springs and lowering springs (we recommend h&r or eibach) and have a fully threaded body for individual lowering like the original 993 cup suspension. You will need to run our drop links for the sway bar, part # FVD333900. Lowering is adjustable to 30 mm (1.18 inches) left or right side fitment. Sold individually. For matching front club sport shocks, please order part # 1150002li for the left and part # 1150002re for the right. For a properly spec'd complete kit including front and rear club sport shocks with lowering springs and rear drop links, please order part # FVD33399300.
$382.80
Make a selection 24135199601YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$363.00
Make a selection 96410403306BFNG Zylinderkopfe sind nur noch gebraucht ( uberholt , austausch ) erhaltlich. Nicht bei uns. Wir liefern zylinderkopfe inklusive ventilfuhrungen und sitze eingearbeitet , alles wie original. Es werden die originalen ventile und andere anbauteile ( stiftschrauben, usw ) wieder verwendet. Keine anpassung notwendig fur die verwendung unserer kopfe. Kopfe werden aus einer hochfesten und thermisch unempfindlichen aluminium legierung aus dem vollen gefrast. Fur motorsportkunden konnen auch sonder-anfertigungen nach wunsch produziert werden. Hier ist nahezu alles moglich, uber die bearbeitung der kanale , zylinderkopf am ausgang, usw. Fragen sie uns an falls sie hierzu fragen bzw. Wunsche haben. Preis pro stuck.
$1,938.20
Make a selection 115050060030 Contrary to the tender spring which usually has a full effect on the road behaviour, the helper spring's only use is to fix the main spring in the spring seat when the wheel is completely released. Thus the helper spring prevents the loosing of the spring when the wheel gets released. The installation of the helper spring has no effect on the suspension characteristics of the vehicle. By using of the helper spring, spring-to-perch gaps of up to 50 mm can be covered.
$82.50
Make a selection 93000651000 Decals are commonly overlooked when completing a restoration or refreshing the paint. They are often a key detail that sets a car apart when being judged at an event or being purchased by a keen aficionado. Replace yours with this quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $17.55
Make a selection 115900991GT3 This cancellation kit is made specifically for the 991 GT3 and 981 GT4 and eliminates the Porsche active suspension management (pasm) warning light and persistent trouble codes when installing a conventional suspension kit on a car with pasm. The functioning of the of the electronic control unit remains completely intact and Porsche dynamic chassis control (pdcc) is also fully functional. Warning: if the pasm is switched off with the Porsche tester (pwis), the pdcc is also deactivated!
$649.00
Make a selection 24135191101YS High efficiency performance and race brakes for track and street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on street cars. Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for street and tack driving. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider ebc redstuff. Highlights: made for up to 9...(choose a part on the right to read more)
$199.10
Make a selection 115900997BIGT3 The legendary pss10 suspension now available for the 997 GT3/rs and GT2. 10 way adjustability,variable ride height settings and dual spring configuration make the pss10 the perfect suspension for club sport or track events
$4,767.40
Make a selection
$55.00
Make a selection
$55.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |