The bbi autosport 997 & 991 GT3 / rs exhaust side bypass is a direct replacement for the factory primary side mufflers. The primary mufflers are weigh approximately 44 pounds total while the bbi pipes are 4 pounds in comparison. For durability and protection against corrosion, each system is meticulously tig welded using 304 aerospace grade stainless tubing with lower carbon content. The result is a substantial reduction in weight behind the rear axle which significantly improves handling and less restriction to produce a much more aggressive exhaust note.
Features
• delivers deep aggressive exhaust sound
• significant weight reduction of 40 pounds
• 304 stainless steel aerospace tubing
• meticulo...(choose a part on the right to read more)

Oversize shipping charge will apply.
This rear deck lid with integral lemans style spoiler for the 914gt look fits all 914 models. It has an ultra strong foam core and composite multi-layer construction on the outer section or "deck lid skin" which is hand laid and vaccuum bagged. The inner deck re-inforced frame is then bonded onto the outside skin in the mold preventing any flexing utilizing state of the art 2 part adhesives. This deck lid has threaded inserts and is designed to use the existing hinges and latching mechanism. Average weight: 14 lbs .

Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar headlight bucket. Features: - produced by an OEM manufacturer. - lightweight .6 lbs. (.3 kg) - made of high strength kevlar. - metal mounting ring is cast inside the bucket for mounting. Sold individually. 1 necessary per car. Please note: requires drilling for wiring, etc. This is a high-quality part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Brombacher sport muffler for 997.2 GT3 / rs (sound version) with rsr style tips facts: - + 10 crank hp & + 10 crank torque - 2 3/4 tubing (70mm) straight through design for max. Power - weighs 28 lbs. (12.7 kg) - replaces stock side mufflers and stock center muffler - 36 lbs (16.3 kg) savings over stock system! - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - 2 x 3.5 (90mm) rsr angle cut tips - includes all necessary clamps and mounting brackets - made in Germany - 105 db - intoxicating cup car growl at idle, partial throttle and wide open throttle - no interior resonance - no dme programming necessary, does not alter emissions, 50 state legal in the u.s. For reference: 997 GT3 OEM ...(choose a part on the right to read more)

- equal length long tube headers with motorsports merge collector. - 200 cell hd German hjs tri metal sport cats. - primary diameter 50mm outer , 47mm inner for the larger 3.8l displacement. - t316 lightweight stainless steel. - reduces thermal stress on the motor. - made in Germany by m&m exhaust gmbh. Please add 2 engine to header gaskets when ordering - 2 qty 997 111 107 31 power: - 981 GT4 / spyder (3.8l) = + 18 crank hp (13kw) & 16 crank torque ( 21 nm) our latest development for the 981 is aimed at those who are looking for more torque in the mid-range, a rich, deep exhaust growl. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. T...(choose a part on the right to read more)

Brombacher panamera s & 4s "sound version" sport muffler - 10 crank hp & + 9 crank torque. - 2.5'' tubing (63,5mm) straight through design for maximum power. - 11 lb. Weight savings. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - quad 4'' (100mm) round tips sold separately for basic OEM systems (without Porsche sport exhaust)* - tips can be individually adjusted for personal taste. - deeper tonal quality and louder volume which enhances 4.8 l Porsche sound.** - no ecu (software) programming necessary. - will work with OEM exhaust components. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - made in Germany...(choose a part on the right to read more)

Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel and motorsports grade carbon. Features: inner 3.5" (90 mm) polished stainless-steel tip with FVD logo outer 3.9" (100 mm) matte carbon surround includes clamps for complete installation fills the factory cut outs perfectly can be adjusted for r...(choose a part on the right to read more)

A good, handy flashlight is a must to have in your car. The csi flashlight has 8 super-bright leds for it’s main illumination and providesa a clean, white light. It also features 3 green light leds for maintaining your night vision when reading maps and such. For emergency situation, the csi flashlight can flash on and off to warn other drivers as well as flash sos in morse code to signal for help. The body of the flashlight is anodized aluminum for light weight and features a hexagonal endpiece to resist rolling when set down and is water-resistant. Included is 3 aaa batteries. This one flashlight can be a lifesaver in those inopportune times on the road.

General Fitment

The bbi autosport Porsche 991 GT3 exhaust center section is a direct replacement for the secondary center muffler. For those who desire a slightly milder exhaust tune, this piece is a great alternative to our cup-style side muffler bypass pipes. By retaining stock side mufflers and valves, the factory "sports button" feature is kept to conveniently switch back and forth between the aggressive "sport" mode during spirited driving sessions and the quieter, more civil "non-sport" mode for minimal noise on the highway.

Features
• delivers deep aggressive exhaust sound
• internal crossover bypass design
• significant weight reduction
• retains sports exhaust button function
• tig welded t3...(choose a part on the right to read more)

This is a rear carpet kit for a rs model or a rs tribute, without back seats. This set is a lightweight fine German velour that is trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. We can also add special order script on the rear deck, just contact us and let us know what you have in mind. Made in Germany. Sold as a set. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a complete floor carpet kit for a rs / rs tribute, without back seats. This set is a lightweight fine German velour that is trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. Driver's side vinyl heel pad and side pads (like original) is also included. Made in Germany. Sold as a set. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a complete floor carpet kit for cabrio models. This set is a lightweight fine German velour that is trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. Driver's side vinyl heel pad and side pads (like original) is also included. Made in Germany. Sold as a set. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Increase the horsepower of your 914/6 or 916 with bursch performance headers. They have been dyno, track and street tested since 1958. Bursch headers are available in a variety of diameters to suit your displacement and driving preference. Each hand made header is mandrel bent from durable 16-gauge steel and is coated with 1,200-degree high temp paint. Features: increased horsepower and torque weight savings 16 gauge steel coated in 1,200 degree high temperature paint sold as a set (left and right). 1 necessary per car. Please note: this replaces your stock heat exchangers and does not include heat. These headers do not include provisions for o2 or temperature sensors. Use of this product for purposes other tha...(choose a part on the right to read more)

If you are looking to replace a damaged strosek kit or update your car with a strosek kit, we have it. This is made with lightweight gfk / grp (glass fiber komposite / glass reinforced plastic). Sold as a set. 1 needed per car. Please note: this does not include door sills. Ohne turleisten

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a complete floor carpet kit for coupe models. This set is a lightweight fine German velour that is trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. Drivers side vinyl heel pad and side pads (like original) is also included. Made in Germany. Sold individually.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a lightweight carpet kit for a rs model or a rs tribute, without back seats. This set is made from German fine velour. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each is cut, sewn and trimmed to fit perfectly. Details: German fine velour made in Germany includes front floormats driver's side vinyl heel pad and side pads (like original) are also included. Custom made to order sold as a set. 1 necessary per car. Please note: when placing your order, we require the year, model and a list of any interior upgrades like roll bars, etc. This kit is custom made to order.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive....(choose a part on the right to read more)

3-piece bbs motorsport wheel with forged aluminum center star can be mounted using either an OEM bolt pattern or a center lock setup. Weight optimized performance wheel featuring relief-milled spokes that offer unparalleled strength and stability. Available in many different sizes and offsets and center star available in silver, gold, black and white at no additional charge

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The ultimate bilstein sport suspension for club racing and street performance! This suspension was developed under real racing conditions by bilstein with double world rally champion walter rohrl. - reduced weight via the use of an integrated reservoir. - 2 way damping adjustment (bound (red) and rebound (blue) independently). - dials with good visibility and scaling (from 1 to 10). - easy to adjust when installed with click screening and color coding. - bilstein mono-tube gas pressure technology. - adjustable aluminum uniball camber plates (rear). - TUV approved. - made in Germany. What's in the box: - adjustable dampers including double springs. - rear uniball camber plates. - spring tensioning key (tool). -...(choose a part on the right to read more)

3-piece bbs motorsport wheel with forged aluminum center star can be mounted using either an OEM bolt pattern or a center lock setup. Weight optimized performance wheel featuring relief-milled spokes that offer unparalleled strength and stability. Available in many different sizes and offsets and center star available in silver, gold, black and white at no additional charge.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a lightweight carpet kit for a rs model or a rs tribute, without back seats. This set is made from lightweight fine German perlon felt that is trimmed in fabric. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each is cut, sewn and trimmed to fit perfectly. Details: German lightweight perlon felt includes trim / edging made in Germany does not include floormats custom made to order sold as a set. 1 necessary per car. Please note: this set does not include floormats when placing your order, we require the year, model and a list of any interior upgrades like roll bars, etc. This kit is custom made to order.

This item may need to be sourced from German...(choose a part on the right to read more)

Fits: s, 4.8l, 294kw (10-), 3.6l, 220kw (11-), GT3 cup 3.6l (05-07), GT3 rs, 3.8l, 331kw (10-), GT3, 320kw (10-), 305kw (07-09), GT2 rs, 456kw (11-), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), speedster, 300kw (10-), Carrera GTS2, Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), 3.4l, 235 kw (09-), 2.9l, 195 kw (09-), s 3.4, 217 kw (06-08), 2.7, 180 kw (07-08), 228 kw (09-), 188 kw (09-), rs spider, 3.4l, 223kw (08-08), 3.4, 217 kw (07-08), 3.2, 206 kw (05-06), 176 kw (05-06)

General Fitment