This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The symptoms of a worn tie rod end include, clunking, rattling and squeaking when turning, poor alignment and premature tire wear. Have the rod ends inspected when servicing your suspension and proactively change them when noticing any of the symptoms. Quality European aftermarket replacement designed to perform like the original. Sold individually. Left or right-side fitment. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary between 6-8 weeks. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car. Please note: this part number encompasses: Bosch part 0 438 140 045 for 911 SC models from 1977-80 and Bosch part 0 438 140 089 for 911 SC models from 1980-83

This item may need to be sourced from Germany an...(choose a part on the right to read more)

Excellent repair panel for this area of the front 914 fender

Kotflugel hat zur windschutzscheibe hin ein abgebogenes eck.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Like new

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

No need now to use fiberglass rocker panels on your GT conversion with our new GT steel rocker panel ends. Easily welded on, these ends are a perfect match to our GT flares and can be welded to our new steel rocker panels or to your original metal ones. Price is for four pieces. These are special order and may not be in stock, please call to inquire about lead time.

Set of four.

Great way to repair the drivers side front fender dog leg under the side marker

Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)

Heavy duty steel version; 2 required per car

View/Change Diagram

911 1989-94 - Engine	911 1994-98 - Engine
911 Turbo/GT2 2001-05 - Engine	911 Turbo/GT2 2007-09 - Engine
911 Turbo/GT2 2010-13 - Engine	911 GT3 2003-05 - Engine
911 GT3 2007-11 - Engine	911 GT3 2007-11 - Engine

Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

Boxster 1997-04 - Front Axle/Steering	911 1998-05 - Front Axle/Steering
911 Turbo/GT2 2001-05 - Front Axle/Steering	911 GT3 2003-05 - Front Axle/Steering

View/Change Diagram

911 1998-05 - Body	911 1998-05 - Body
911 Turbo/GT2 2001-05 - Body	911 Turbo/GT2 2001-05 - Body
911 2005-08 - Body	911 2009-12 - Body

View/Change Diagram

911 1998-05 - Body	911 1998-05 - Body
911 Turbo/GT2 2001-05 - Body	911 Turbo/GT2 2001-05 - Body
911 2005-08 - Body	911 2005-08 - Body
911 2009-12 - Body	911 2009-12 - Body
911 Turbo/GT2 2007-09 - Body	911 Turbo/GT2 2007-09 - Body
911 Turbo/GT2 2010-13 - Body	911 Turbo/GT2 2010-13 - Body

High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1998-05 - Body	911 1998-05 - Body
911 Turbo/GT2 2001-05 - Body	911 Turbo/GT2 2001-05 - Body
911 2005-08 - Body	911 2005-08 - Body
911 2009-12 - Body	911 2009-12 - Body
911 Turbo/GT2 2007-09 - Body	911 Turbo/GT2 2007-09 - Body
911 Turbo/GT2 2010-13 - Body	911 Turbo/GT2 2010-13 - Body

If you are noticing engine vibrations, misfires and even backfiring your crankshaft position sensor maybe bad. Your car's dme (ecu) uses the signal from the crankshaft position sensor to control ignition timing and fuel injection, so if your sensor is failing your engine is suffering from poor timing and is not running efficiently. Please note: if ordering for the 996 turbo or GT2, this is only for manual transmissions.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1994-98 - Electrical

911 Turbo/GT2 2001-05 - Engine

Ksport adjustable endlinks replace the non-adjustable factory endlinks for many vehicles, allowing you to lower the vehicle and change swaybar preload. These replace the weak stock endlinks to further reduce the chance for flex under hard cornering.


Note: actual product may vary from slightly from photos.

All images represent the item, but actual product may vary depending on make and model.

General Fitment

This muffler produces a glorious flat six race car with low deep tones that reminds us of the 964 cup. It is manufactured in Germany by m&m exhaust, gmbh. This muffler is ideal for anyone who wants a lower deeper tone with more decibels, whether they are just replacing the side muffler or are running cat bypass, sport cats or a cup pipe. + 14 hp (10 kw) & + 15 tq (20 nm) gain. - 2 3/4 tubing (70mm). - weighs 13.8 lbs (6.3 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions. - includes factory style hangars and new aero quip style clamps for simple installation. We recommend replacing your exhaust tip with this u...(choose a part on the right to read more)