The clutch cable disengages the clutch in order to safely shift the transmission. A failing clutch cable can produce the same symptoms as a failing clutch, so we recommend replacing the cable / cables when installing a new clutch. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. This part number supersedes part numbers 930 423 401 02 / 03 / 05. Sold individually. 1 necessary per car. Please note: this fits the 1978 930 3.3 l turbo model from chassis # 930 880 0192 on.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check st...(choose a part on the right to read more)

An excellent performance upgrade. Lightened steel flywheels are susceptible to shattering under aggressive driving conditions. Because aluminum is lighter than steel, we are able to produce aluminum flywheels utilizing stock dimensions. Aluminum flywheels are perfect for road racers looking for quicker revs. It is also a nice complement for turbocharged cars experiencing lag.

Don't believe what you read on forums about loud chatter and ruining your driveability! Does your car have an exhaust? Do you listen to music? The only time there is a slight bit of noise from the flywheel is when you are stopped at a light and the clutch pedal is pressed in. Go ahead, shut off your exhaust and radio then you will...(choose a part on the right to read more)

General Fitment

It was only a matter of time before clutch masters built the ultimate clutch kit for the Porsche 996 and 997 turbo. With the success of their stage 3 OEM replacement kits holding 700 horsepower with daily driveability, clutch masters wanted to step up their clutch game and release this new 8.5 inch twin disk clutch with flywheel for the Porsche 911 turbo. This race version of the twin disk is recommended only for race use as initial pedal engagement as it requires finesse. The complete clutch weighs an astonishing 23lbs. The stock flywheel alone weighs about 40lbs!

The lightweight flywheel helps improve turbo spool up by reducing rotational weight. As a kit, it is a complete bolt on for the factory clutch...(choose a part on the right to read more)

General Fitment

The manual transmission turbo models use a hydraulic accumulator. If it is beginning to fail, you will experience a very heavy clutch pedal when the engine is not running. Once the car is started and begins to warm up the pedal becomes less heavy. You can also feel that the pedal is very notchy in certain spots. We always recommend replacing the accumulator when installing a new slave cylinder. Also, replace the accumulator o-ring, part # 99970722440 for 993 and 996 turbo and o-ring, part # 99970752940 for 997 and 997-2 turbo. Original part # for the 993 turbo was 993 314 166 00, it has been superseded since then. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would...(choose a part on the right to read more)

View/Change Diagram

911 1994-98 - Pedal System/Levers	911 Turbo/GT2 2001-05 - Pedal System/Levers
911 Turbo/GT2 2007-09 - Pedal System/Levers	911 Turbo/GT2 2010-13 - Pedal System/Levers

It was only a matter of time before clutch masters built the ultimate clutch kit for the Porsche 996 and 997 turbo. With the success of their stage 3 OEM replacement kits holding 700 horsepower with daily driveability, clutch masters wanted to step up their clutch game and release this new 8.5 inch twin disk clutch with flywheel for the Porsche 911 turbo. This race version of the twin disk is recommended only for race use as initial pedal engagement as it requires finesse. The complete clutch weighs an astonishing 23lbs. The stock flywheel alone weighs about 40lbs!

The lightweight flywheel helps improve turbo spool up by reducing rotational weight. As a kit, it is a complete bolt on for the factory clutch...(choose a part on the right to read more)

General Fitment

The bbi autosport Porsche 996/997 turbo clutch slave cylinder conversion kit is a direct replacement part that eliminates the problematic factory power-assist system for improved reliability and pedal feedback. The factory power-assisted clutch system has always been the achilles heel for the Porsche 997 turbo. Utilizing the power steering system to help reduce the force needed to depress the clutch pedal, it is a flawed design that delivers a mushy pedal feel with poor feedback, and is highly prone to failure.

Unlike other kits, the bbi autosport kit is designed be used with OEM clutch master cylinder, hose, and spring pack. This eliminates the need for additional parts, making our kit a complete plug an...(choose a part on the right to read more)

Quicker acceleration, leight weight.
Kit contains the following part:
Pressure plate, rigid sintered disc, release bearing, flywheel,starter ring gear, guide tube, bolts.

Fits: GT2 (08-09), turbo (07-09), GT2 (01-05), turbo (01-05), GT2 (96-98), turbo (95-98)

General Fitment

Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. They offer a silky-smooth release, superb drivability, quicker acceleration and can handle more torque (486 ft/lbs. / 660 nm max.). This kit includes a clutch disc with torsion springs that function as a vibration damper between engine and gearbox. That allows for an effortless pedal release when engaging each gear. The lightweight flywheel allows the engine to rev more freely which means quicker acceleration, faster shifts and getting into the power band more quickly. This kit is suited for daily use / light track...(choose a part on the right to read more)

General Fitment

Sachs replacement clutch kit makes replacing your Porsche clutch a simple task. Sachs is an OEM supplier for Porsche, so you can expect the same quality engineered and manufactured parts that came standard in your car. Each kit come with the different parts needed in one convenient package. This kit contains a clutch disc, pressure plate, and release bearing.

General Fitment

Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. This kit has a rigid hub with organic friction material with superior thermal resistance, is more resistant to higher rpm's than the oe discs, offers greater longevity and can transmit higher torque. The lightweight flywheel allows the engine to rev more freely which means quicker acceleration, faster shifts and getting into the power band more quickly. It is an ideal kit for highly modified street or track car. This kit can handle more torque (700 ft/lbs. / 950 nm max.). But, please keep in mind that if you plan ...(choose a part on the right to read more)

General Fitment

The perfect clutch for aggressive drivers who want that strong 1st and 2nd gear holding power. What most people use to buy as the "stage 3", this is now 1 step up with fiber tough on both sides giving a slightly more aggressive pedal feel and what makes the fx350 perfect for high amounts of torque. The dual sided fiber tough disc does make start and stop a little getting use to, but is an aggressive disk that will hold your high horsepower Porsche 996 tt. 1st gear takes a little bit of pedal control but after that the car engages and drives like oem. Clutch masters fx350 will provide more holding power than stage 1 & 2, yet it still offers exceptionally smooth driveability and long life. Combined with the alu...(choose a part on the right to read more)

General Fitment

FVD Brombacherstainless steel lines for Porsche are manufactured in europe and are TUV approved. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. This construction ensures minimal expansion inside the hose core. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. This is a direct replacement for original part # 993 314 477 02

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Eliminate your clutches slipping and chattering with this genuine kit. We only recommend this kit for non-modified cars that are not running any aftermarket upgrades like exhaust, chip tuning, larger displacements or larger turbochargers, etc. Complete kit consists of: 1 qty. Clutch disc 1 qty. Pressure plate 1 qty. Release bearing 1 qty. Spline lubricant kit weighs 31 lbs. (13.7 kg) please note: this kit is for the 1989 930 turbo 3.3l g50-50 5 speed transmission only! Tech tip:great idea to install a new clutch fork FVD116999 if you havent' done so already. Also, if you have a sloppy feeling when shifting? It's a great idea to add a shift coupler repair kit to your order, our part # 150pb00741. It will make ...(choose a part on the right to read more)