![](https://30ed524141d0cac60ab4-d2e2d18a14257de3b9ce428cf077ee97.ssl.cf2.rackcdn.com/acban.jpg)
303 not categorized PORSCHE 924 RIGHT KCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 TURBO/GT2 2001-05 - Front Axle/Steering (includes uncategorized and accessory items) ![]() FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection FVD34101802ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD201911RSR110 Whether you are restoring a tribute car or endurance racing your 911, this tank will fit the bill. It is made in Germany from pvc plastic and includes high grade threaded brass inserts. It is build by fia specs and can be adapted to work in all 911's from 67-89. It holds a capacity of 29 gallons or 110 liters.
$3,065.70
Make a selection FVD123014 K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection FVD11104001 These headers are meant to replace the original 993 GT2 r (993 111 039 83) headers that are no longer available. They will reduce turbo lag and add horsepower and torque. Made of t316 stainless. Primaries are 42mm (1.65 ). Merge into a 50mm (2 ) motorsports collector. Manufactured by m&m exhaust in Germany.
$1,835.90
Make a selection
From $82.48
Make a selection FVD911503185186 This seal kit consists of original part # 911 503 185 00 (left) and 911 503 186 00 (right). The set can be used on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold as a set. 1 set is necessary for front fenders and one set is necessary for the rear. Please note: this is the thinner width. This is not the thicker width from the SC models.
$14.93
Make a selection KEV53112000 For factory cars.
$3,294.50
Make a selection
$9.51
Make a selection KEV53100601 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. ** does not include the inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric...(choose a part on the right to read more)
$3,285.70
Make a selection FVD424049ER If you are using numeric racing performance cables on your race car, then we suggest upgrading your rod ends to these steel ends which will take far more abuse at the track. These are recommended for race cars only as metal on metal contact means increased noise and vibration in the cabin. Sold individually.
$22.00
Make a selection FVD50193600 Steel, prime coated floor pan repair panel made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$341.00
Make a selection FVD34310007R FVD-alu-camberplates replace soft top strut rubber bushings. The FVD-camberplates are machined from billeted aluminum, providing you with a wide range of camber possibilities. . FVD-alu-camberplates fits on original-shocks and cup-shocks. General Fitment911 TURBO/GT2 2001-05911 1998-05
$519.45
Make a selection FVD3431453RPS10
$3,489.20
Make a selection FVD34102800ATK By ordering this part number you get after previous sending in your wishbone overhauled with new race-silent blocs back. The race-silent blocs (85 shore) give you more stable driving. Should it not be repairable, we will inform you immediately.
$279.40
Make a selection
$61.22
Make a selection FVDBRO906549 This disc is a genuine brembo replacement part. It is drilled and vented. Sold individually. Be sure to purchase the correct disc assembly hardware kit, FVD part # FVDbro915502.
$783.12
Make a selection 96473132040EQ This is the mounting hinge for the sun visor. It is made of aluminum, rather than the original plastic. Sold individually. 1 necessary per car.
$23.10
Make a selection 90110516802 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Professional installation is required. Different manufacturing tolerances require an inspection of the free clearance of all parts! Sold individually. 1 necessary per car.
From $1,054.90
Make a selection 90110734801 Line is for vehicles with oil pressure sensor
From $21.11
Make a selection FVDBRO906541 This disc is a genuine brembo replacement part. It is drilled and vented. Sold individually. Be sure to purchase the correct disc assembly hardware kit, FVD part # FVDbro915503.
$604.09
Make a selection KEV53100600 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 6.4 kg (14.1 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. - includes inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric mirrors.
$3,473.80
Make a selection FVDBRO906537 This disc is a genuine brembo replacement part. It is drilled and vented. Sold individually. Be sure to purchase the correct disc assembly hardware kit, FVD part # FVDbro915506.
$625.90
Make a selection FVDBRO906539 This disc is a genuine brembo replacement part. It is slotted and vented. Sold individually. Be sure to purchase the correct disc assembly hardware kit, FVD part # FVDbro915506.
$625.90
Make a selection FVD731911001
$145.20
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |