Vehicles
Sections
319 not categorized PORSCHE 356 B WE NEED A CARCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 GT3 2007-11 (includes uncategorized and accessory items) 90157391500EQ Expansion valves regulate the flow of refrigerant. When they start to fail, they can create frost on the vents or the ac compressor, blow warm air or constantly run the ac compressor. High-quality hella OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
$35.20
Make a selection 91110090300EQ This "complete gasket set" includes also the crank case gasket. Fits 2.2t/2.4t models from 1970 to 1973
$371.80
Make a selection 91134101310ATK The reconditioning process includes full inspection of the cross member to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we seal it with a corrosion resistant plating. Send us your cross member and we will have it reconditioned for you. We do not offer a core exchange on this part. If your original part is defective and cannot be salvaged, we will notify you and make arrangements for its return. Sold individually. 1 necessary per car.
$224.40
Make a selection 91120127200EQAS We suggest periodically checking your gas cap seal for fine cracks which produce fumes. If you replace the cap and the fumes persist, check the fuel filler neck, fuel lines, expansion tank and vent shut off valves. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
$18.70
Make a selection 91135508701EQ Classic Porsche flexible brake hoses can suffer from dry rot and can eventually split and leak fluid, creating a serious safety concern. This line is a high-quality replacement made by brax. It is designed to perform like the original and has the same length and threaded ends. Includes the supporting reinforcement wire like the original. Sold individually. Right or left side fitment. 2 necessary per car.
$22.00
Make a selection 911561051012EQ This is the top outer section of the cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers are made for modern electric tops with stronger frames for the 911 and 964. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. Made in Germany. This would replace original part # 911 561 051 012xw sold individually. 1 necessary per car. Only f...(choose a part on the right to read more)
$1,141.80
Make a selection 911563051002EQ This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a pvc plastic rear window like the original. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion; increased fade resistance and the tighter woven layers are made for stronger frames. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. This would replace original part # 911 563 051 00 2xw made in Germany. Sold individually. 1 necessary per car.
$1,992.10
Make a selection 91153170202 As a striker plate ages, it will start to rattle and can potentially be a safety risk. We recommend securing them with new oval head screws, part # 99921900800. 2 screws are needed per plate. We also recommend adding new striker plates gaskets, either 90153170323 or 90153170324 depending on what thickness you need. This line is a high-quality replacement part, sourced in Germany and designed to perform like the original. Sold individually. 1 necessary per car.
From $133.10
Make a selection 911606105HXATK The cis injection / k-jetronic warm up regulator is a critical component that performs the following functions: lowers pressure when engine is cold. Absorbs / distributes engine heat. Allows for an additional rich mixture under full load to prevent engine damage. Altitude correction. Send us your original part and we will have it remanufactured for you. We do not offer a core exchange on this part. Each part is remanufactured in Germany, so the lead times can vary. Sold individually. 1 necessary per car.
$744.70
Make a selection 91163103300 This is the screw that sits at the base of the adjustment ring, part # 91163193301. We also recommend purchasing a new rubber spacer, part # 91163113900. Sold individually. Driver's and passenger's side fitment. 2 necessary per car.
From $8.40
Make a selection 91163120603SCHR Fog lights are prone to stone chips and cracks. Inspect and replace them before they allow moisture in. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car.
$299.20
Make a selection 91163193300EQ This is the inner headlight ring that retains the adjustment and securing screws. This part is "resi-coated" and includes all mounting hardware. Sold individually. Driver's or passenger's side fitment. 2 necessary per car.
$93.50
Make a selection 91163194900EQ As our classics age tail lights tend to suffer from oxidation, scratches, chipping and cracking. Replacing a tail light can take years off your car and is a must for a restoration. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
$104.50
Make a selection 91163195100EQ Don't let a cracked or faded lens detract from your cars appearance. Replace it with this high-quality OEM replacement, designed to perform like the original. This was genuine equipment on usa models but really cleans up the rear when added in place of the amber look. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. Driver's side fitment. 1 necessary per car. Lookin...(choose a part on the right to read more)
$90.20
Make a selection 91163196400EQ Fog lights are prone to stone chips and cracks. Inspect and replace them before they allow moisture in. Quality aftermarket replacement designed to perform like the original. Sold individually. Drivers or passenger's side fitment. 2 necessary per car.
$45.10
Make a selection 91511608705 On the flywheel side, the guide tube facilitates the movement of the thrust bearing in order to engage / disengage the clutch. On the gearbox side it provides a seal between the gearbox and driveshaft. These two functions are critical, so we recommend replacing the guide tube with any thrust bearing or clutch replacement. High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $120.76
Make a selection 915302911161 This ring and pinion is manufactured in Germany to our specifications using case hardened steel (18crnimo7-6). Our specifications include special heat treatment which is extremely wear resistant, contains a tough inner core, includes high tensile strength and exhibits lower noise levels. Sold as a set. 1 necessary per car. Technical info: setting for the drive train is on the bevel gear and not as usual on the ring gear.
$5,408.70
Make a selection 93010090104EQ High-quality victor reinz replacement gaskets, o-rings and washers to reseal your engine case (short block). Victor reinz has been supplying German auto manufacturers and Porsche for decades. They are a trusted name in gaskets and sealing products. This kit is complete with everything needed and we source this directly in Germany for an added level of quality. Sold individually. 1 set necessary per car. Please note: if you prefer the genuine crankshaft sealing ring, please order part # 99911342641 this also includes the intermediate shaft o-ring, part # 99970731540. Please check the model fitment tab to ensure accurate fitment.
$118.80
Make a selection 93011059506 Fuel lines are made of layered rubber that tends to dry out and crack with age. If a line is going bad you may experience a strong fuel smell. Examine the line for swelling at the connections, cracks and fuel leaks. Replace as quickly as possible for safety. High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$555.50
Make a selection 93020711107 Oil hoses tend wear, crack and become clogged due to age, vibration, road debris and poor oil quality. Oil hoses should be inspected regularly and replaced at the first signs of leaking or oil sweating from the cracks in the hose. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
From $73.70
Make a selection 93020711306 Oil hoses tend wear, crack and become clogged due to age, vibration, road debris and poor oil quality. Oil hoses should be inspected regularly and replaced at the first signs of leaking or oil sweating from the cracks in the hose. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
From $73.70
Make a selection 93060290201A Contacts on the rotor wear with age, creating misfires, tapping or clicking noises and eventually no start situations. We recommend replacing both the rotor and cap. Be sure to use the corresponding manufacturers cap as well. High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We sell a cap and rotor together under part # FVD60291101 sold individually. 1 necessary per car.
$16.41
Make a selection 93060290401A Distributor caps are often overlooked as the source of ignition issues. If yours is failing or cracked, you can experience shaking at idle, poor starting in the cold, stalling and backfiring. Be sure to replace it if you see any signs of cracking. This is a high-quality beru replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $26.40
Make a selection 93061221102 When your pads reach a critical level, these sensors will trigger a warning to alert you that your pads need to be changed. Be sure to purchase these in conjunction with your new brake pads. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per axle.
From $13.67
Make a selection 94463190500 European flachbau / slant nose models came with this position light. It sits just inside of the front turn signal. They suffer from cracks caused by road debris, and should be replaced as soon as a crack is noticed. Replace yours with this high-quality hella replacement. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: bulb is not included, please order part # 90063110590 separately.
From $12.44
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |