Vehicles
Sections
303 not categorized PORSCHE 964 S BRACan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 2009-12 (includes uncategorized and accessory items)
$326.70
Make a selection
$4.86
Make a selection
$148.50
Make a selection 964561005016HA This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a trapezoidal pvc plastic rear window with a zipper like the original. If the window gets hazy simply unzip, remove and add a new window. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers are made for modern electric tops with stronger frames, like the 911 and 964. Sonnenland high quality material was originally used by Porsche and other top German ...(choose a part on the right to read more)
$2,377.19
Make a selection FVD351425426EQ A quality, cost effective set of replacement "big red" style calipers. These are a direct replacement for the 965 turbo, 993 c4s / rs and 993 turbo but can be installed on many 964 / 993 models with the correct caliper adapters. Please contact your FVD parts specialist for fitment questions. We also recommend swapping out your brake lines for a set of stainless braided lines when replacing calipers. Also a now is the time to install a set of our speed bleeders, part # FVD910102. They are comparable to part numbers 993 351 425 10 and 993 351 426 10. Please note: these are aftermarket calipers and do not come with the logo or brake pads. Sold individually. 1 necessary per car.
$944.46
Make a selection 96437504381 Replace your worn-out, original soft rubber engine mounts with our higher density, rs specification rubber bushing. This is manufactured of rubber with a 75-shore hardness value. 75-shore is the same density as what is used in the rs models. It is more durable, provides more positive, sharper shifts and offers crisper throttle response. Yet, rs spec rubber is still quiet and comfortable for street use. Features: sharper shifts crisper throttle response does not produce nvh (noise vibration harshness) like teflon or solid bushings rubber has a shore hardness value of 75 (like rs models) made in Germany this mount is a high-quality OEM (original equipment manufacturer) replacement part, designed to perform like t...(choose a part on the right to read more)
From $215.99
Make a selection FVD34101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$451.44
Make a selection FVDBS351930003 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of front pads (4 total), part # 96435193903 2 qty. Oem brake warning sensors, part # 94461221105 sold as a set. 1 necessary per car.
$91.48
Make a selection FVDBS351965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of front pads (4 total), part # 92835194903 2 qty. Oem brake warning sensors, part # 99361236801 4 qty. Oem brake pad damping shims (44 mm piston), part # 96535109600 4 qty. Oem brake pad damping shims (36 mm piston), part # 96435109601 sold as a kit. 1 necessary per car.
$218.59
Make a selection FVDBSK352965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (genuine), part # 96535204100 & 96535204200 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (34 mm piston), part # 96535209601 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 please note: this kit fits both the 965 3.3l and 3.6l.
$1,755.86
Make a selection FVDBSK351930002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (zimmerman), part # 93035104700 & 93035104800 1 qty. Oem set of rear pads (textar), part # 96435193903 sold as a set. 1 necessary per car.
$509.65
Make a selection FVDBSK351930003 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (zimmerman), part # 93035104703eq & 93035104803eq 1 qty. Oem set of rear pads (textar), part # 96435193903 2 qty. Oem brake warning sensors, part #94461221105 sold as a set. 1 necessary per car.
$438.37
Make a selection 24135296401RS Highlights: made for up to 750*c (1,382*f) for street, some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator...(choose a part on the right to read more)
$256.61
Make a selection 24135296401BS Highlights: superb daily driver, OEM replacement, r90 type approved pad. Features red "brake in" surface coating for instant safe braking after install. New 100 % eco friendly material with zero sulphides. No shims for noise reduction needed. More bite from cold. Works in hot and dry climates as well as in cold. Fully r 90 approved. If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad? The blackstuff brake pad is a total non metallic pad containing zero steel fiber, maki...(choose a part on the right to read more)
$133.06
Make a selection 90026904701 View/Change Diagram
From $0.54
Make a selection 95011601254 Made in Germany by sachs to original specifications. Oem disc. Torsion sprung. Weighs: 4.6 lbs. (2.10 kg) discs with torsion springs function as a vibration damper between the engine and gearbox. They effectively lessen the harshness felt during re-engagement. Please note: please check the model fitment tab to ensure accurate fitment.
From $873.18
Make a selection 96410403306BFNG Zylinderkopfe sind nur noch gebraucht ( uberholt , austausch ) erhaltlich. Nicht bei uns. Wir liefern zylinderkopfe inklusive ventilfuhrungen und sitze eingearbeitet , alles wie original. Es werden die originalen ventile und andere anbauteile ( stiftschrauben, usw ) wieder verwendet. Keine anpassung notwendig fur die verwendung unserer kopfe. Kopfe werden aus einer hochfesten und thermisch unempfindlichen aluminium legierung aus dem vollen gefrast. Fur motorsportkunden konnen auch sonder-anfertigungen nach wunsch produziert werden. Hier ist nahezu alles moglich, uber die bearbeitung der kanale , zylinderkopf am ausgang, usw. Fragen sie uns an falls sie hierzu fragen bzw. Wunsche haben. Preis pro stuck.
$2,093.26
Make a selection 146096479 Thermo-tec snap straps General FitmentALL
$31.32
Make a selection 24135296401YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$301.75
Make a selection 96437502301RATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our transmission mount is manufactured in europe by an OEM supplier using the finest materials (high carbon steel, 7075 t6 aluminum and 85 shore rubber - rs spec). Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$190.08
Make a selection 96437502301ATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our mount is remanufactured in europe by an OEM supplier using the finest materials. It is a 65 shore rubber hardness value which is the same as the what was standard on these cars. Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$192.46
Make a selection 99635208600 Known as: damping plate View/Change Diagram
From $11.84
Make a selection 99335140887 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$795.96
Make a selection 99335140787 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$795.96
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |