PORSCHE 356 GAS PUMP
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 2005-08 (includes uncategorized and accessory items)
Complete gasket kit (front and rear) for mechanical injection pumps.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This brand has a composite impeller.
From $270.00
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $4.53
Make a selection
From $4.16
Make a selection
From $2.43
Make a selection
Known as: sealing ring
View/Change Diagram
From $9.18
Make a selection
From $166.31
Make a selection
From $3.78
Make a selection
Kit includes:
Software fast load dme, sport air filter, header system, sportmufflers and endtips 3,8l to fit the mufflers to the bumper.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 239kw (325hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 259kw (352hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,998.21
Make a selection
Kit includes:
Software fast load, sport air filter, header system, sportmufflers and endtips 3,8l for the mufflers.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 239kw (325hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 259kw (352hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine ma...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,986.33
Make a selection
The bbi autosport Porsche 996/997 turbo clutch slave cylinder conversion kit is a direct replacement part that eliminates the problematic factory power-assist system for improved reliability and pedal feedback. The factory power-assisted clutch system has always been the achilles heel for the Porsche 997 turbo. Utilizing the power steering system to help reduce the force needed to depress the clutch pedal, it is a flawed design that delivers a mushy pedal feel with poor feedback, and is highly prone to failure.
Unlike other kits, the bbi autosport kit is designed be used with OEM clutch master cylinder, hose, and spring pack. This eliminates the need for additional parts, making our kit a complete plug an...(choose a part on the right to read more)
$1,436.40
Make a selection
Kit includes:
Software fast load, sport air filter, GT sport exhaust system
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 290kw (395hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)
General Fitment 911 2005-08
$10,688.44
Make a selection
Also included with our latest software version for the 997tt & GT2 is a free single user license for durametric basic software, allowing you to read out and diagnose fault conditions on your vehicle.
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 390kw (530hp) @ 6000rpm
Max. Torque - 720nm (531lbf ft) @ 3000-4000rpm
Max. Speed - 320km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.7s
FVD-Brombacheris proud to announce that we are now offering do-it-yourself flash load ecu ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,894.86
Make a selection
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 239kw (325hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 250kw (340hp) @ 7000rpm
Max. Torque - 390nm (288lbf ft) @ 4500rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.8s
Kit includes:
Software fast load, sport air filter, GT sport exhaust system
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,303.24
Make a selection
High temperature rtv black silicone in a convenient dispenser. Non-corrosive and low odor. Use for gasketing, pump-oil pans, valve covers, gear boxes, water pumps, thermostats, and transmission parts.
General Fitment ACCESSORY
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 325mm versus 298mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high streng...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$1,603.80
Make a selection
The vf-engineering supercharger system for the 997 Porsche is a result of 12 months of ongoing development and testing. The specification for this kit was set as:
bolt-on and reversible conversion
all hardware must fit under factory engine compartment lid
non-invasive installation OEM quality
6 psi with air-water intercooling
hp target in the 996tt range with stock reliability and driveability
The vf-engineering designers set about designing the billet supercharger mounting bracket with cad software creating solid models of parts to be cnc manufactured. The bracket was designed to utilize OEM bolt patterns and requires no alteration or relocation of any engine parts to...(choose a part on the right to read more)
General Fitment 911 2005-08
$14,572.71
Make a selection
Recommend: gasket to the pump 99610634071must be ordered seperatly.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
The girodisc system is a direct replacement for the oe disc on all 997.1 GT3/gt2's, both pccb and non-pccb equipped vehicles.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by girodisc in the usa to girodisc own specifications and cadmium plated for a l...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13 911 2009-12 911 1998-05 911 2005-08
$1,749.60
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers and longer bolts. Girodisc rotor is slightly larger than the OEM rotor at 340mm versus 317mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 911 1998-05 911 2005-08
$1,603.80
Make a selection
Factory: engine - v8 twin-turbo capacity - 4806ccm compression ratio - 10,5:1 max. Power - 368kw (500hp) @ 6000rpm max. Torque - 700nm (516 lbf ft) @ 2250-4500rpm max. Speed - 275km/h max. Rpm - 6500rpm acceleration 0-100km/h - 5.1s tuning:* max. Power - 397kw (540hp) @ 6000rpm max. Torque - 780nm (575 lbf ft) @ 3500rpm max. Speed - 280km/h max. Rpm - 6700rpm acceleration 0-100km/h - 5.0s * only with sport exhaust system and sport air filter for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, ...(choose a part on the right to read more)
$1,182.06
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers and longer bolts. Girodisc rotor is slightly larger than the OEM rotor at 350mm versus 330mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 2005-08
$1,749.60
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|