Vehicles
Sections
57 not categorized PORSCHE 996T SUSPENSION KITCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 (includes uncategorized and accessory items) BBI9964010001 Features
$567.00
Make a selection BBI9965010002 • provides additional rear toe adjustment
$945.00
Make a selection FVD33150005 Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm cannot compensate enough when lowering your Porsche, leaving you with as much as ½ inch of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold in pairs. 1 necessary per car.
$825.66
Make a selection FVD343996TPSS9 Only for vehicles equipped with bilstein suspension pss9/10. General Fitment911 TURBO/GT2 2001-05911 1998-05
$2,037.29
Make a selection FVD33150010 Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 t6 aircraft aluminum. They will positively locate the suspension arms so suspension motion is accurately repeated in every corner. Sold as a set. 1 kit is necessary per car. Please note: we recommend this kit for race use, as noise may resonate inside the cabin during street use. For those that are concerned about the noise, please order part # FVD3310212291
$760.32
Make a selection CPO010KP Ksport kontrol pro fully adjustable coilover kits provide the ultimate in suspension technology for your street or track car. 36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs. The dampening adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design. The pillow ball top mounts also allow you a more direct feel for solid driver response. Camber adjustability is included on pillow ball top mounts that allow it for the ability to adjust camber from the actual coilover, instead of a separate camber kit. General Fitment911 1998-05
$2,213.24
Make a selection CPO010RR Ksport version rr damper system is built specifically for road racing only. Aggressive rates and valving are chosen for maximum handling and performance with acute reaction and responsiveness. Integrated with 36 levels of dampening adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts, and pillow ball upper mounts on some applications. (race use only.) General Fitment911 1998-05
$2,950.99
Make a selection FVD33399300 A cost effective FVD exclusive combination of bilstein clubsport shocks with a set of TUV certified eibach springs. This suspension kit will lower the front axle to a maximum of 35 mm (1.37 inches) and the rear axle to 30 mm (1.18 inches), like the European rennsport model. The height is adjustable as the dampers are threaded. They are a cost effective solution for clubsport use and will be well mannered on the street. Sold as a complete kit. 1 kit is necessary per car.
$3,323.19
Make a selection A1019 The girodisc system is a direct replacement for the oe disc on all 996 GT2/gt3's. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency. The girodisc front rotors are approx 21.0 lbs vs. 25.6 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. General Fitment911 TURBO/GT2 2001-05911 1998-05
$1,749.60
Make a selection TSPOR002 Torque solution dogbone rear control arms General Fitment911 1998-05
$737.38
Make a selection TSPOR005 Torque solution solid rear subframe bushings General Fitment911 1998-05
$185.88
Make a selection TS00001 Torque solution adjustable thrust arm bushing kit replaces the factory,rubber bushings on the wheel-end of the control arms with abilletaluminum bushing,this will allow forbetter handling and most importantalso allows for the adjustment of General Fitment911 1998-05
$278.85
Make a selection S701041 Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The fk teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions. Unlike the competitors' product, rennline arms come with eccentric locks and new hardware so you can completely eliminate the factory setup, which is known to go out of adjustment under hard driving and ruin your car's alignment. Note: two required per car. General Fitment911 1998-05911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11 CAYMAN 2006-08 BOXSTER 2005-08
$331.45
Make a selection POZMI00 This is the latest step in the hlins racing automotive philosophy - road&track by hlins. General Fitment911 1998-05
$4,111.56
Make a selection FVD33396401 A cost-effective combination of bilstein b6 shocks with a set of German h&r lowering springs. This kit is a perfect balance of performance and comfort for street use. Benefits: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Slightly lower stance at 1.3 inches (35 mm) front / 1.18 inches (30 mm) rear. Marked improvement in safety and sportiness. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Please note: if you would like to reduce the ride height, please order part # 115110016 which will lower the stance by another 1.5 inches (40mm).
$2,741.61
Make a selection FVD33396400 A cost-effective combination of bilstein b6 shocks with a set of German h&r lowering springs. This kit is a perfect balance of performance and comfort for street use. Benefits: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Slightly lower stance at 1.3 inches (35 mm) front / 1.18 inches (30 mm) rear. Marked improvement in safety and sportiness. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Please note: if you would like to reduce the ride height, please order part # 115110016 which will lower the stance by another 1.5 inches (40mm).
$2,925.20
Make a selection AP997240 Suspension has always been a specialty of agency power. With the current product list consisting of sway bars, control arms, sway bar links, and more, agency power has finally decided to add one more value to the Porsche suspension line up, the rear adjustable toe links. The stock suspension of the Porsche is a great start, but lacks a lot to improve cornering, adjust proper camber, and dial in the toe. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely then stock. The cnc machined links are made from 6061 aluminum.they are anodized blue to match other agency power products and then laser engraved with the ap logo...(choose a part on the right to read more) General Fitment911 1998-05911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$647.95
Make a selection 115900986BIUSA
$3,788.53
Make a selection 11595B00EIB Lowering up 30mm, front axle load 1290kg / 1340 rear, 1475 kg with trailer operation. Not for vehicles with level control/air suspension.
$741.31
Make a selection AA914501 This is a perfect fit kit to reconstruct the complete right rear inner fender well battery tray suspension console engine shelf area that every Porsche 914 suffers from the battery leaking acid. i am always asked about reconstructing the rusted away battery area, referred to some as the "914 hell hole" (hate that term applied to a 914 lol) so have finally decided to list the whole kit on e bay so you can see how the parts interact. (support was painted for contrast buy you will get a brand new one) moderately installed by the home hobbyist or welder/body man, it will return your car to its original configuration and strength. all parts manufactured by us in michigan based on original factory nos parts for ...(choose a part on the right to read more)
$1,188.00
Make a selection FSBA19 The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness. they are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.
$642.60
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |