T-316 stainless steel headers from FVD produce dyno proven horsepower and torque as well as a phenomonal sound! FVD headers feature equal length, mandrel bent tubing and a merge collector to further improve exhaust gas flow, reduce system back pressure and optimize exhaust gas scavaging and cylinder filling. FVD headers are dyno tested and produce up to 15 lb ft. Of torque in the mid range where the 3.4l needs it most. Tech tip: for older cars repair-kit FVDmk996201

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Headers (set) 45mm +20kw (27ps) +17nm

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

T-316 stainless steel headers from FVD produce dyno proven horsepower and torque as well as a phenomonal sound! FVD headers feature equal length, mandrel bent tubing and a merge collector to further improve exhaust gas flow, reduce system back pressure and optimize exhaust gas scavaging and cylinder filling.

FVD headers are dyno tested and produce up to 15hp

Tech tip: for older cars repair-kit
FVD mk 996201

Fits: c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01)

General Fitment

Supersprint exhaust headers Porsche 996 3.6l c2/c4 02-04

Supersprint exhaust headers are sold as a pair to replace your factory header units. the headers are all stainless steel with a redesigned flow pattern compared to stock. the headers will change the tone of your 996 as well as gain you horsepower and torque. the headers bolt up directly in replace of the factory units. they fit with the factory cat pipes or aftermarket ones by supersprint.


*contact us for special pricing.*

General Fitment

For 2012+ 911 (991) with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with motorsports merge collector. - 200 cell hd German hjs tri metal sport cats. - 2 3/4 tubing (70mm) - reduces thermal stress on the motor. - made in Germany power with software and bmc filters: - 991 (3.4l) = + 25 crank hp (15 kw) & + 18 crank torque (20 nm) - 991s (3,8l) = + 25 crank hp (15kw) & 18 crank torque (20 nm) our latest development for the 991 is aimed at those who are looking for more torque in the mid range, a rich, deep exhaust growl. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. They have a sm-matrix (winding of three f...(choose a part on the right to read more)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.

Speedtech exhaust system provides improve throttle response and increased hp. Fitment is perfect and the OEM tips are re-used for a factory look. High quality welds, low restriction design and a mirror polished finish combine to create an exceptional performing, fantastic sounding, high quality exhaust with a mirror polish for a beautiful finish. The exhaust is made from 16 gauge, t-304 stainless steel and features 2.5 inch piping for a...(choose a part on the right to read more)

General Fitment

- equal length long tube headers with motorsports merge collector. - 200 cell hd German hjs tri metal sport cats. - primary diameter 50mm outer , 47mm inner for the larger 3.8l displacement. - t316 lightweight stainless steel. - reduces thermal stress on the motor. - made in Germany by m&m exhaust gmbh. Please add 2 engine to header gaskets when ordering - 2 qty 997 111 107 31 power: - 981 GT4 / spyder (3.8l) = + 18 crank hp (13kw) & 16 crank torque ( 21 nm) our latest development for the 981 is aimed at those who are looking for more torque in the mid-range, a rich, deep exhaust growl. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. T...(choose a part on the right to read more)

Facts: - long tube race headers with motorsports merge collector. - catalytic bypass for race use. - 2 1/2 tubing (63.5 mm). - primary diameter 45mm outer , 42mm inner - reduces thermal stress on the motor. - made in Germany please add 2 engine to header gaskets when ordering - 2 qty 997 111 107 31 our latest development for the 981 is aimed at those who are looking for more torque in the mid-range and horsepower up top. These headers are ideal for those who are tracking their cars.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Improving upon designs, r&d, and delivering a quality product to the market is what agency power has continually done. Developing yet another high quality product for the Porsche vehicle, agency power has released their Porsche 996/997 performance header kit. These headers are 321stainless steel. Each headers is fully polished with amazing robotic welds. The headers have very strong and precision cut 1/4 inch flanges. The agency power headers mount and fit to the factory cat pipes or aftermarket ones.

Agency power designed the headers to change the sound of the Porsche, increase air flow, and improve horsepower. During dyno testing, the headers made almost 5 wheel horsepower. On a normally aspirated 996 or 9...(choose a part on the right to read more)

General Fitment

Supersprint exhaust headers Porsche 996 3.4l c2/c4 99-01

Supersprint exhaust headers are sold as a pair to replace your factory header units. the headers are all stainless steel with a redesigned flow pattern compared to stock. the headers will change the tone of your 996 as well as gain you horsepower and torque. the headers bolt up directly in replace of the factory units. they fit with the factory cat pipes or aftermarket ones by supersprint.


*contact us for special pricing.*

General Fitment

These headers are meant to replace the original 993 GT2 r (993 111 039 83) headers that are no longer available. They will reduce turbo lag and add horsepower and torque. Made of t316 stainless. Primaries are 42mm (1.65 ). Merge into a 50mm (2 ) motorsports collector. Manufactured by m&m exhaust in Germany.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

B&b headers Porsche 996 c2/c4 02-04

B&b Porsche 996 Carrera 2 or 4 headers are made of t304 stainless steel 1 3/4 inch tubing. the headers fit the 1999-2001 c2 or c4 model. b&b headers increase horsepower and torque with their high flow design. the tone of the 996 will also change. headers are a direct bolt on and include everything needed for installation.

This product is made to order, please allow 7-10 days prior to shipment.


*contact us for special pricing.*

General Fitment

For 997-2 with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - made in Germany power: - 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm) - 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm) - with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm) tech tip: dme programming neccessary!

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

B&b headers Porsche 996 c2/c4 99-01

B&b Porsche 996 Carrera 2 or 4 headers are made of t304 stainless steel 1 3/4 inch tubing. the headers fit the 1999-2001 c2 or c4 model. b&b headers increase horsepower and torque with their high flow design. the tone of the 996 will also change. headers are a direct bolt on and include everything needed for installation.

This product is made to order, please allow 7-10 days prior to shipment.


*contact us for special pricing.*

General Fitment

With many decades of experience with exotic cars, kreissiegs engineers have put down significant time and efforts to produce fantastic exhaust systems. Their exhaust systems have very complicated construction to accomplish the best in exhaust sound and quality.

Not only do the valves control the loudness, the system also has unique muffler construction to produce a unique exhaust tone. This is how kreissieg can achieve its high-pitch exhaust sound that no one else can imitate.


Specification

Valve system for controlling loudness in two modes
Stainless steel construction
Dual 160x100mm cats-eye stainless tips
Electric wired remote control switch

General Fitment

For 997-2 with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with long tube design - 200 cell hd German hjs tri metal sport cats - 2.5 tubing (63.5 mm) - made in Germany power: - 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm) - 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm) - with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm) our latest development for the 997.2 is aimed at those who are looking for more torque in the mid range, a rich, deep exhaust growl. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat...(choose a part on the right to read more)

These headers are meant to replace the original 993 GT2 r (993 111 039 83) headers that are no longer available. They will reduce turbo lag and add horsepower and torque. Made of t316 stainless. Primaries are 42mm (1.65 ). Merge into a 50mm (2 ) motorsports collector. Manufactured by m&m exhaust in Germany.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Product details:

Equal-length headers provide improved torque and equalized engine pulsing thanks to industry-exclusive mandrel-bent primary tubes, gaskets included.

Features:

-fits all Porsche 996 Carrera vehicles 1998-2005
-improves horsepower and torque by 15 whp and 12 ft-lbs
-saves 2 lbs from the rear of the vehicle
-one piece cnc mandrel-bent primary tubes provide maximum uninterrupted flow
-f1-style merge collectors provide optimized exhaust scavenging
-improves power and torque throughout the rpm range
-direct replacement for the factory headers
-simple diy bolt-on installation
-all fabspeed performance products are backed by the fabspeed life...(choose a part on the right to read more)

General Fitment

- + 20 crank hp & + 14 crank torque. - 200 cell hjs tri-metallic "hd" cats. - 2 tubing (50 mm) with motorsport merge collector. - weighs 18.5 lbs. (8.4 kg). - 1.5 lb (9.1 kg) saving's over OEM header. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - works with OEM sealing rings and clamps. See below for part numbers. - made in Germany. - reduces thermal load and backpressure to for more torque in the mid-range and hp on the top end. Be sure to add new clamps and sealing rings to your order. 2 qty. Clamps are needed, they are part # 99711133690 and 2 qty. Sealing rings are needed, they are part # 98011156100. Our latest development for the GT3 is aimed at those who are looking fo...(choose a part on the right to read more)

Required when adding a free-flow exhaust system with the part # FVD 211 328 489x or FVD 211 328 489xx. Also required when adding dual outlet heat exchangers or dual inlet mufflers. Sold as a kit. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Performance composite exhaust gaskets replace the OEM or aftermarket gaskets for a better seal and improved longevity

Features:

Fits OEM and oem-style factory exhaust systems
Made from high temperature material for maximum quality and durability
Simple installation

General Fitment