PORSCHE BOXSTER CAR MATSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 - Front Axle/Steering (includes uncategorized and accessory items) 911561051012EQ This is the top outer section of the cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers are made for modern electric tops with stronger frames for the 911 and 964. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. Made in Germany. This would replace original part # 911 561 051 012xw sold individually. 1 necessary per car. Only f...(choose a part on the right to read more)
$1,141.80
Make a selection 98704400008 Smooth-fitting indoor car cover featuring full-color Porsche logo. designed for use out of the weather, as indoor protection from dust and dirt. Made from a breathable, antistatic material, features full-color Porsche logo. General FitmentACCESSORY
$479.25
Make a selection 24135291101YS High efficiency performance and race brakes for track and street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on street cars. Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for street and tack driving. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider ebc redstuff. Highlights: made for up to 9...(choose a part on the right to read more)
$204.60
Make a selection 24135296401BS Highlights: superb daily driver, OEM replacement, r90 type approved pad. Features red "brake in" surface coating for instant safe braking after install. New 100 % eco friendly material with zero sulphides. No shims for noise reduction needed. More bite from cold. Works in hot and dry climates as well as in cold. Fully r 90 approved. If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad? The blackstuff brake pad is a total non metallic pad containing zero steel fiber, maki...(choose a part on the right to read more)
$123.20
Make a selection 24135291101RS Redstuff brake pads offer significant reduction in stopping distances compared to oe pads. They also reduce annoying brake dust by 60-90%. Plus, the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fiber particles like other pads. The material used in these pads is a kevlar fiber-based brake compound enhanced with ceramic particles. It lasts longer, brakes better and is considerably quieter than OEM or other aftermarket pads. Redstuff pads contain a brake-in coating that accelerates the bed in period. This is a truly impressive high-performance pad for modified European cars, even under repeated heavy braking. Highlights: made for up to 750*c (1,382*f) for street, so...(choose a part on the right to read more)
$171.60
Make a selection 24135299601YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$286.00
Make a selection 24135296401YS Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
$276.10
Make a selection BES99126010SOL Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$660.00
Make a selection 96434705804SP We are committed to Porsche cars and are very happy to release an inner tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 032 00. We also suggest replacing your outer tie rods, part # 96434703200 (qty. 2 are needed) and now is also a good time to replace your worn out inner tie rod dust bellows, part # 96434719103. Please note: this is not for the ...(choose a part on the right to read more)
$196.90
Make a selection 96437502301RATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our transmission mount is manufactured in europe by an OEM supplier using the finest materials (high carbon steel, 7075 t6 aluminum and 85 shore rubber - rs spec). Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$176.00
Make a selection 96434703200SP We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 032 00. This is ideally suited for use with our monoball inner tie rod, part # 96434705805sp for the 964 c2 / turbo look or 965 or part # 96434705804sp for the 964 c4 or rs. Please note: this is not for the wide body. Sold indiv...(choose a part on the right to read more)
$322.17
Make a selection 96437502301ATK Send us your OEM transmission mount bracket and we will restore it to better than new condition! Our service includes removal of the old mount, media blasting, proper installation of the new mount and protective seal coating. Our mount is remanufactured in europe by an OEM supplier using the finest materials. It is a 65 shore rubber hardness value which is the same as the what was standard on these cars. Simply order and send us your OEM bracket, we will take care of the rest. Approximate lead time is estimated between 3-6 weeks.
$178.20
Make a selection 96455550700EQ A-pillar lining made of original leatherette material, sourced and manufactured in Germany. Each is cut, sewn and trimmed for precise fitment. We go to extra lengths to ensure that our linings are as similar to the originals as possible. Replaces original part # 964 555 507 00 05t made in Germany. Sold individually. 1 necessary per car.
$94.60
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |