Vehicles
Sections
64 not categorized PORSCHE 924S TURBO WHEELSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 (includes uncategorized and accessory items) 240964352OV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. General Fitment911 1994-98968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95 911 1970-73
From $346.90
Make a selection FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,206.12
Make a selection FVD123014ATK K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharg...(choose a part on the right to read more)
$3,214.73
Make a selection 99312301352AT Our k-16 remanufactured turbo is cost competitive and is a direct replacement. Simply send us your original k16 turbochargers and a borg warner / kkk certified technician will remanufacture your turbo. The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will replace the turbine wheels, thrust bearings, install new seals, install new waste gates, recondition the internals and high speed balance the turbo. This ensures reliability and superior performance for many years to come. The remanufacturing is done on an exchange basis only. You must send us your original k16 turboc...(choose a part on the right to read more) General Fitment911 1994-98
$2,415.20
Make a selection 95504460012 Set of four five-pointed star wheel center caps with full-color Porsche crest. Suitable for the 18-inch Cayenne turbo wheel. General FitmentACCESSORY
$276.19
Make a selection 930123002X This remanufactured turbo is a direct replacement for original part # 930 123 002 00. The remanufacturing is completed in Germany by kkk/borg warner certified technicians. This ensures reliability, superior performance and cost effectiveness. The remanufacturing process includes: complete disassembly. All parts are cleaned, inspected and measured for tolerances. Turbine wheels are replaced. Thrust bearings are replaced. All new seals are installed. Internals are reconditioned. Parts are balanced (static & dynamic) according to balancing protocol. For a complete installation we recommend adding a gasket, part # 93012319105 an intake sleeve, part # 93011015801 and be sure to have a few spare studs on hand, part #...(choose a part on the right to read more)
From $3,220.28
Make a selection 240965351SV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: • 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. • 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. • 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in perio...(choose a part on the right to read more) General Fitment911 GT3 2003-05911 1994-98 911 1989-94 928 1992-95
From $343.44
Make a selection 99312301352ATK Our k-16 remanufactured turbo is cost competitive and is a direct replacement. Simply send us your original k16 turbochargers and a borg warner / kkk certified technician will remanufacture your turbo. The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will replace the turbine wheels, thrust bearings, install new seals, install new waste gates, recondition the internals and high speed balance the turbo. This ensures reliability and superior performance for many years to come. The remanufacturing is done on an exchange basis only. You must send us your original k16 turboc...(choose a part on the right to read more)
$2,370.06
Make a selection 12837023R Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sportstop cross-drilled or drilled+slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water e...(choose a part on the right to read more) General Fitment911 1989-94911 1994-98 944 1989-91 944 1985-88 968 1992-95
$275.40
Make a selection 12837025R Stoptech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with stoptech sportstop cross-drilled or drilled+slotted rotors.every sportstop brake rotor is produced from a high quality centric parts blank casting and finished in a durable e-coating for corrosion resistance. Sportstop drilled and slotted brake rotors (prefix 127) prevent glazing of the pads, add bite and improve wet and dry braking performance.every sportstop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water e...(choose a part on the right to read more) General Fitment911 1989-94911 1994-98
$257.10
Make a selection 240964351OV Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®. General Fitment911 1994-98968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $274.75
Make a selection 99312301452ATK Our k-16 remanufactured turbo is cost competitive and is a direct replacement. Simply send us your original k16 turbochargers and a borg warner / kkk certified technician will remanufacture your turbo. The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will replace the turbine wheels, thrust bearings, install new seals, recondition the internals and high speed balance the turbo. This ensures reliability and superior performance for many years to come. The remanufacturing is done on an exchange basis only. You must send us your original k16 turbocharger. After receiving y...(choose a part on the right to read more)
$2,370.06
Make a selection 99336212800 Fits 1989-98 c2 and c4 and turbo. Can be fitted to some earlier cars. Available in 7x17, 7.5x17, 8x17 and 9x17. The 7.5 and 9 inch size are replica wheels. Silver painted with clear coat. Originally shipped on 1995-98 993. View/Change Diagram
$1,253.88
Make a selection AP9972TT170 The stock exhaust of the Porsche 997.2 turbo is very restrictive compared to aftermarket systems. Porsche does this to meet sound and emission purposes like most OEM manufacturers. agency power set out to create an exhaust system for the new Porsche 997.2 turbo 6speed or pdk that did not drone, would produced amazing performance, and under throttle give an incredible sound. we have accomplished this! the new agency power exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit.
$4,049.95
Make a selection FVD11401214 Hailing from the baden wurttemberg region in Germany, speaking the language and dealing with lead engineers from the OEM and motor sport manufacturers for more than 30+ years has many advantages. We are able to source this flywheel from an elite German motorsports manufacturer who delivers the highest quality available. Features: quicker acceleration 9 bolt scalloped design precision machined billet steel computer balanced made in Germany replacement for original number 93010220201 sold individually. 1 necessary per car. Please note: this only fits 930 turbo models from 1978-79.
$569.05
Make a selection FVD123014 K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$3,214.73
Make a selection BBI9964010002 Finally, a complete solution to properly widen the front track width of a Porsche 996 and 997 turbo. To help increase front end grip, this kit allows full negative camber adjustment without binding the axles and fitment of wider wheel/tire combinations and GT3 cup car fenders. Each kit includes lower control arms, thrust arms, axle spacers, upper mounts, and camber shims.
$3,990.60
Make a selection FVD1169093 Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. This kit has a rigid hub with organic friction material with superior thermal resistance, is more resistant to higher rpm's than the oe discs, offers greater longevity and can transmit higher torque. The lightweight flywheel allows the engine to rev more freely which means quicker acceleration, faster shifts and getting into the power band more quickly. It is an ideal kit for highly modified street or track car. This kit can handle more torque (700 ft/lbs. / 950 nm max.). But, please keep in mind that if you plan ...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05 911 1994-98
From $2,888.72
Make a selection FVD1169051 Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts that have been developed to work together without compromise. This kit's contains a sachs racing clutch disc, made with sintered metal plates that have a higher friction coefficient than plates with organic friction. A sintered disc allows for higher transmittable torque and is more dirt and oil resistant. Sintered disc's aggressive start performance makes them very suitable for racing. Please note this kit is meant for modified cars. Due the aggressive start performance of the sintered disc, we do not recommend this kit for street cars. Clutch kit includes everything neede...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $2,398.85
Make a selection FVD11610312 Sport clutch kit with rigid clutch disk (for cars already equipped with a light flywheel). General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05 911 1994-98 911 1989-94
$1,995.94
Make a selection FVD11610311 This FVD exclusive clutch kit is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and motorsports parts. It has been developed to replace a kit that already has an existing lightweight flywheel that does not need to be replaced. We specifically chose a clutch disc with torsion springs that functions as a vibration damper between engine and gearbox, to give you an effortless release. This kit is suited for daily use and offers a superior driving experience. It offers a silky-smooth release, superb drivability, can handle more torque (583 ft/lbs. / 790 nm max.). Clutch kit includes: 1 qty. Clutch disc 1 qty. Pressure plate 1 qty. Release bearing 1 qty. Spline lubricant 9 qty. Pressure pl...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09911 TURBO/GT2 2001-05 911 1994-98 911 1989-94
From $2,010.15
Make a selection FVD99361871 Power gains: + 15 hp & + 13 lb. Ft of torque General Fitment911 1994-98
$2,370.06
Make a selection FVD50399101MM The moshammer front fender set blends just the right amount of motorsport pedigree with functionality. This aggressive design is captivating on any 991 model and offers a level of exclusivity not found with competitors body kits. The integrated fender vents lower the thermal load on the brakes by allowing the heat to be quickly ventilated up and out of the wheel arch. This composite fender set has been meticulously designed to bolt up to the factory locations for perfect panel fitment, alignment and consistent gaps. A perfect addition for a leased vehicle or for those looking to return the car to its original appearance in the future. These fenders complement the entire moshammer stormforce (991.1) / stormforce...(choose a part on the right to read more)
$3,921.59
Make a selection WAPC20SET01 Study the rich history of Porsche off-road and all-wheel drive technology with this four-vehicle set. Includes 911 east african safari rallyecar, 911 monte carlo rallyecar, 959 paris-dakar competitor, and Cayenne turbo. All in 1:43 scale, complete with off-road theme case. In a limited edition of 5000 sets.
$212.65
Make a selection FVDSK5 Shorten the shift throw by 40% General Fitment911 1994-98911 1989-94
$316.01
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |