81 not categorized PORSCHE 356 C BUMPER REARCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 (includes uncategorized and accessory items) RBGF993C Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well. General Fitment911 1994-98
$2,794.58
Make a selection KEV50502000 Trying to save weight on your track car? Replace your heavy factory rear impact bar with our lightweight kevlar / carbon bumper bar. It weighs a mere 4.4 lbs. (2 kg). For reference your OEM rear (based on a u.s. Car) bar is ~ 16 lbs. (7.25 kg), so you will shave off 11.6 lbs. (5.25 kg) with the FVD bumper bar. Made in Germany. General Fitment911 1994-98
From $1,203.44
Make a selection
From $103.95
Make a selection
From $1,458.00
Make a selection
$167.42
Make a selection BES99126010SOL Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$712.80
Make a selection E19208 Rennline's stainless steel folding race hook install in minutes on any Porsche with factory screw type removable tow hook. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", rennline's stainless steel tow hook is a precision machined and will stand up to the extreme abuse seen in any race environment. With a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a hook that are highly visible and h...(choose a part on the right to read more)
$165.13
Make a selection KEV50501000 Trying to save weight on your track car? Replace your heavy factory front impact bar with our lightweight kevlar / carbon bumper bar. It weighs a mere (1 kg). For reference your OEM rear (based on a u.s. Car) bar is ~ 16 lbs. (6 kg), so you will shave off (5 kg) with the FVD bumper bar. Made in Germany. General Fitment911 1994-98
From $1,218.89
Make a selection E66 Until now, track enthusiasts who removed there bumper supports to reduce weight had no options for mounting tow hooks for track applications. Rennline's new tow hook receivers replace the factory bumper shocks with a bolt on mount that rennline’s ”screw in” style tow hooks thread into, allowing a completely stock appearance on the street and enhanced functionality on the track. All rennline’s tow hooks have a 2" opening, as required by most track sanctioning bodies. Powder-coated steel construction with stainless steel hardware, comes with black rubber bumper plug for stock appearance when hook is removed. Screw in hook (p/n re1309, re0509 or re0609) sold separately. Note: all front mounts utilize the...(choose a part on the right to read more) General Fitment911 1989-94911 1994-98
$100.98
Make a selection FVD51299122MM The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the evo rs (991.2 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: vented f...(choose a part on the right to read more)
$1,992.28
Make a selection FVD51299701MM Rear diffuser for all Porsche 997.1 Carrera models. The mounting is very easy. Plug & play with 3M double tape and 2 screws on the screwing points. Not for models with the turbo | GT2 | GT3 rear bumper
$1,417.28
Make a selection FVD11199300 Are your exhaust tips a little old and unappealing to look at? Update them with a more aggressive look. Made by dansk, from t304 stainless steel with a polished finish. 4.75 long x 3.35 high (120x85mm) to fill in the entire bumper cut out. Angle cut to complement the rear bumper. If you would like to update your exhaust tip clamps and hardware, please order the following: 2 qty. 92811124605 2 qty. 92811142700 4 qty. 90007425202 4 qty. FVD116929 2 qty. 99908405202 General Fitment911 1994-98
From $352.84
Make a selection FVD51299102MM The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the downforce rs (991.1 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: ve...(choose a part on the right to read more)
$1,577.66
Make a selection BES99716000S1 Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs i...(choose a part on the right to read more)
$919.51
Make a selection E0112 This tow hook now features an embossed body resulting in superior rigidity over any comparable product on the market. Designed to bolt onto the factory bumper shock mount location on all 911/912/930 cars from 1974-89 with fiberglass bumpers (front or rear). It is easily adaptable for use in many applications. Most aftermarket fiberglass bumpers vary in depth, therefore rennline's unique design is adjustable from 9" to 12" allowing you to fine tune the amount of exposed hook protruding through your bumper. Although this tow hook was designed for the 911, it can be used on several custom applications. Each tow hook comes powder-coated red with (2) tow stickers. General FitmentALL
$77.22
Make a selection
$34.43
Make a selection E68 A majority of newer factory built race cars feature retractable tow hooks, and now rennline has engineered a tow hook for your custom race car that offers the same advantages. These retractable tow hooks are available as “bolt on” units for any corner of your 964/993 with fiberglass bumpers, or when used with our universal mounting brackets, these hooks can be mounted in many different configurations based on your specific needs. Made from powder-coated steel with a spring-loaded retractable hook and comes with (2) tow stickers. Your shins will thank you. General Fitment911 1989-94911 1994-98 944 1982-85 944 1985-88 944 1989-91
$177.01
Make a selection 91450501901 This is a factory correct bumper for all 1970 914 and 914-6 models with the angled cut around the license plate as opposed to the round cut later bumper. no 1970 model is correct without it.
$1,188.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |