Vehicles
Sections
108 not categorized PORSCHE CAYENNE TURBO MODELCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 (includes uncategorized and accessory items) FVD99361891 Stock: General Fitment911 1994-98
$3,558.06
Make a selection
$40.53
Make a selection FVD99361890 Stock: General Fitment911 1994-98
$2,370.06
Make a selection 10010527501 964/993 camshaft 300°-300°-112°, valve hub 3mm General Fitment911 1994-98911 1989-94
$1,313.00
Make a selection FVD50599721MM For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper
$934.96
Make a selection 129T101854 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$482.33
Make a selection 129T101840 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$482.33
Make a selection 100105274 This camshaft is an excellent choice for those who spend time at clubsport track events or who race. These camshafts are manufactured in Germany by an elite German racing manufacturer, the quality and performance are top shelf. Timing inlet: 300* timing exhaust: 300* md: 112* lift inlet: 13.00 lift exhaust: 13.00 top dead center inlet: 3.00 top dead center exhaust: 2.90 weighs 6.3 lbs. (2.9 kg) please note: these will work on 964 models with upgraded pistons with larger valve pockets, changes to the camshafts are normally not necessary. For 993 models equipped with mechanical rocker arms, a groove must be inserted on the first journal. Please note: different manufacturing tolerances require an inspection of the...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $1,030.43
Make a selection FVD123019ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,206.12
Make a selection 10010527401 964/993 camshaft 300°-300°-112°, valve hub 3mm General Fitment911 1994-98911 1989-94
$1,313.00
Make a selection 129T111852 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$482.33
Make a selection 129T111840 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$482.33
Make a selection FVD51299303 Non turbo models must order the following parts seperatly ! 1 x 190 512 333 1 x 993 512 501 00 70k 4 x 999 507 546 02 6 x 993 512 861 00 3 x 993 512 633 00 General Fitment911 1994-98
From $5,003.28
Make a selection FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,206.12
Make a selection FVD20799601 Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. This oil pan spacer provides a simple solution. This spacer increases sump capacity by half a liter, providing more reserve to ward off starvation. Thisoil pan spacer clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. *oil pan and sump baffle are OEM parts and do not need to be purchased material: 6061 t6 aluminum alloy finish: clear anodized weight: n/a models: Boxster, Boxster s, and 996 models (excludes GT3 and turbocharged models) installation: for best...(choose a part on the right to read more)
$306.50
Make a selection FVD21099321 These stainless-steel muffler bypass exhaust tips offer an aggressive look and sound. They are perfect for those looking for a loud turbo sound with lots of turbo whistling. They are a cost-effective solution for additional top end horsepower at the track. They fill out the bumper cut outs nicely and save weight! Sold as a set (right and left). Specifications: angle cut. Polished stainless finish. 110 mm (4.3 inches) long x 88 mm (3.4 inches) tall weight: 2.0 kg (4.4 lbs.) sold as a set. 1 necessary per car. If you would like to update your exhaust tip clamps and hardware, please order the following: 2 qty. 92811124605 2 qty. 92811142700 4 qty. 90007425202 4 qty. FVD116929 2 qty. 99908405202 please note: these ...(choose a part on the right to read more) General Fitment911 1994-98
From $297.00
Make a selection FVD50399101MM The moshammer front fender set blends just the right amount of motorsport pedigree with functionality. This aggressive design is captivating on any 991 model and offers a level of exclusivity not found with competitors body kits. The integrated fender vents lower the thermal load on the brakes by allowing the heat to be quickly ventilated up and out of the wheel arch. This composite fender set has been meticulously designed to bolt up to the factory locations for perfect panel fitment, alignment and consistent gaps. A perfect addition for a leased vehicle or for those looking to return the car to its original appearance in the future. These fenders complement the entire moshammer stormforce (991.1) / stormforce...(choose a part on the right to read more)
$3,921.59
Make a selection FVD505498 Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass reinforced plastic) front spoiler that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight - made of high strength grp (glass reinforced plastic). - mounting is just like factory, no modifications are necessary. Please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Fits on all narrow body front bumpers and includes all the hardware necessary for installation. Professional installation recommended. General Fitment911 1994-98
From $1,737.12
Make a selection FVD50599701MM For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper
$1,126.22
Make a selection FVD50599702MM Front bumper air vent grill an important component for both cooling and aerodynamics. Ensuring the rapid removal of hot air optimized unit cooling front bumper rs grill for all Porsche 997 Carrera models incl. 4s / GTS / GT3 / turbo
$395.60
Make a selection 00004400050 Smooth-fitting indoor car cover featuring full-color Porsche logo. Designed for use out of the weather, as indoor protection from dust and dirt. Made from a breathable, antistatic material, features full-color Porsche logo. General FitmentACCESSORY
$550.29
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |