Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Another great feature of these hooks are that rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red. Each kit comes with (2) front hooks and all ha...(choose a part on the right to read more)

General Fitment

To achieve a louder and higher pitched exhaust sound with every kreissieg exhaust system, youll find that their cat-delete pipes are a recommended installation. This cat-delete pipe pipe was carefully developed along with each exhaust system to provide optimal performance.

Kreissieg strongly recommends this cat-delete pipe when you purchase one of their exhaust systems to get the best experience possible.

Made from stainless steel material


Note: kreissieg can not guarantee "no cel" with this unit because every car has different emission specs depending on country.

*every kreissieg exhaust system is built to order specifically to each customers request and each handcrafted system ta...(choose a part on the right to read more)

General Fitment

Sachs discs offer higher transmittable torque and thermal resistance. Greater longevity. Similar release to the oe. Direct replacement for the oe clutch disc. 240 mm with a rigid center. Max torque 578 lb/ft (785 nm) made in Germany. Weighs: 2.64 lbs. (1.2 kg) sachs performance clutch discs with organic friction material have a superior thermal resistance, are more resistant against rpm's than oe discs and are able to transmit higher torque. Suitable for daily use and street tuning. The sachs performance clutches are assembled by hand. This guarantees at all times the highest quality attributes in clamping load and release characteristics. The sachs performance clutches are assembled by hand. This guarantees t...(choose a part on the right to read more)

General Fitment

Lightweight flywheels are a great way to improve the performance of your vehicle because they reduce rotating mass. This means your engine will rev more freely and accelerate faster because less horsepower will be lost between the crank and the wheels, making your engine work more efficiently.

Spec billet flywheels are manufactured and developed for specific driving environments and recommended based on how each car reacts to changes in rotating mass. Spec flywheels are not a one-fits-all lightweight flywheel, though they can be used for an array of driving habits and racing/high performance applications. Manufactured from only the highest quality aluminum, they are the only flywheels on the market manu...(choose a part on the right to read more)

General Fitment

Made in Germany and factory improved by leading German automakers, its formula will not harm the delicate finish on your factory wheels. in 1976 by a German chemist, p21s is a water based, non acid, that provides terrific cleaning and guarantees not to damage any of wheel: painted, clear-coated, polished or anodized. Start with the 500ml spray bottle and then reorder the 1000ml refills.

General Fitment

Made in Germany and factory improved by leading German automakers, its formula will not harm the delicate finish on your factory wheels. in 1976 by a German chemist, p21s is a water based, non acid, that provides terrific cleaning and guarantees not to damage any of wheel: painted, clear-coated, polished or anodized. Start with the 500 ml spray bottle and then reorder the 1000 ml refills.

General Fitment

Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.

. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.

Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.

Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.

New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)

General Fitment

To achieve a louder and higher pitched exhaust sound with every kreissieg exhaust system, youll find that their stainless headers are a recommended installation. These stainless headers were carefully developed along with each exhaust system to provide optimal performance.

Kreissieg strongly recommends these headers when you purchase one of their exhaust systems to get the best experience possible.

Made from stainless steel material


Note: kreissieg can not guarantee "no cel" with this unit because every car has different emission specs depending on country.

*every kreissieg exhaust system is built to order specifically to each customers request and each handcrafted system takes 14-...(choose a part on the right to read more)

General Fitment

Made in Germany and factory improved by leading German automakers, its formula will not harm the delicate finish on your factory wheels. in 1976 by a German chemist, p21s is a water based, non acid, that provides terrific cleaning and guarantees not to damage any of wheel: painted, clear-coated, polished or anodized. Start with the 500ml spray bottle and then reorder the 1000ml refills.

General Fitment

This product reduces friction and guarantees energy-conserving performance for the unit. This yields the following advantages: significant savings in fuel and oil consumption, scientifically proved reduction in wear, fewer breakdowns, emergency lubrication properties. Tested on catalytic converters and turbochargers. You may also notice a modest increase in horsepower, and lower fuel and oil consumption.

General Fitment

Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 478kw (650hp) @ 8000rpm max. Torque - 640nm @ 6000rpm max. Speed - 340km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.8s our Carrera GT ecu programming offers you not only more power and torque but phenomenal sound! Within the cgt end muffler is a flap-type mechanism fitted which is controlled by vacuum units. These vacuum units are also controlled by the ecu. Our programming modifies the control of these f...(choose a part on the right to read more)

Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 309kw (420hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 256km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,0s tuning: max. Power - 325kw (442hp) @ 6000rpm max. Torque - 530nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)

Kit includes: software genius flash tool, sport air filter genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 331kw (450hp) @ 5700rpm max. Torque - 620nm (457lbf ft) @ 3500-4500rpm max. Speed - 318km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.0s tuning: max. Power - 375kw (510hp) @ 5000rpm max. Torque - 745nm (550lbf ft) @ 4500rpm max. Speed - 328km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)

Genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s FVD software tuning: max. Power - 478kw (650hp) @ 8000rpm max. Torque - 640nm @ 6000rpm max. Speed - 340km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivabi...(choose a part on the right to read more)

Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)

Factory: engine - v8 twin-turbo capacity - 4806ccm compression ratio - 10,5:1 max. Power - 368kw (500hp) @ 6000rpm max. Torque - 700nm (516 lbf ft) @ 2250-4500rpm max. Speed - 275km/h max. Rpm - 6500rpm acceleration 0-100km/h - 5.1s tuning:* max. Power - 397kw (540hp) @ 6000rpm max. Torque - 780nm (575 lbf ft) @ 3500rpm max. Speed - 280km/h max. Rpm - 6700rpm acceleration 0-100km/h - 5.0s * only with sport exhaust system and sport air filter for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, ...(choose a part on the right to read more)

Made in Germany and factory improved by leading German automakers, its formula will not harm the delicate finish on your factory wheels. in 1976 by a German chemist, p21s is a water based, non acid, that provides terrific cleaning and guarantees not to damage any of wheel: painted, clear-coated, polished or anodized. Start with the 500ml spray bottle and then reorder the 1000ml refills.

General Fitment

Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.

. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.

Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.

Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.

New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)

General Fitment

Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 298kw (405hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 253km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,1s tuning: max. Power - 312kw (425hp) @ 6000rpm max. Torque - 520nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)

Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 265kw (360hp) @ 7200rpm max. Torque - 370nm (273lbf ft) @ 5000rpm max. Speed - 302km/h max. Rpm - 7600rpm acceleration 0-100km/h - 4.8s tuning: max. Power - 276kw (375hp) @ 7000rpm max. Torque - 390nm (288lbf ft) @ 5000rpm max. Speed - 310km/h max. Rpm - 7900rpm acceleration 0-100km/h - 4.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while re...(choose a part on the right to read more)

Kit includes: sport motronic dme exch., sport air filter, sportmuffler TUV, k24-race turbocharger l/r genuine: engine - 6cyl. Boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 309kw (415hp) @ 6000rpm max. Torque - 560nm (413lbf ft) @ 3500-4500rpm max. Speed - 305km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.2s tuning: max. Power - 397kw (540hp) @ 7000rpm max. Torque - 760nm (561lbf ft) @ 4500rpm max. Speed - 331km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the...(choose a part on the right to read more)

Carrillo is one of the most respected connecting rod manufacturers in competitive motor sports. Carrillo rods are constructed from their propriety alloy and forged to their custom specifications. The rods are then fully machined to guarantee the removal of all surface imperfections. After heat treatment, each connecting rod is magnaflux inspected and hardness checked, then machined to final size. Each set is balanced and then shot-peened to achieve the ultimate in strength and fatigue properties.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.